Rice growth, yield and water productivity responses to irrigation scheduling prior to the delayed application of continuous flooding in south-east Australia.

摘要

The majority of rice grown in south-east Australia is continuously flooded for much of its growing season, but reduced irrigation water availability brought about by a combination of drought and environmental flow legislation has presented a need to maintain (or even increase) rice production with less irrigation water. Delaying the application of continuous flooding until prior to panicle initiation can increase input water productivity by reducing non-beneficial evaporation losses from free water and the soil. A field experiment was conducted over two growing seasons, 2008/9 and 2009/10, comparing a conventional dry seeded treatment (the control - continuous flooding from the 3 leaf stage) with delayed continuous flooding (10-20 days prior to panicle initiation) with several irrigation scheduling treatments prior to flooding commencement. In the first year, the delayed water treatments were irrigated at intervals of 40, 80 and 160 mm of cumulative reference evapotranspiration (ETo) prior to delayed continuous flooding, thereby imposing differing degrees of crop water stress. In year 2, the 80 and 160 mm treatments were modified by use of a crop factor (Kc) when the plants were small and the 40 mm treatment was replaced with a continuously flooded treatment throughout the crop duration. Decreases in net water input (irrigation+rain-surface drainage) and increases in input water productivity were achieved by reducing the flush irrigation frequency during the pre-flood period. Savings of 150 and 230 mm (10 and 15%) were achieved in Year 1 from the 80 and 160 mm cumulative ETo irrigation frequency treatments, respectively, in comparison to the control. In the second year, net water input savings of 230 and 330 mm (15 and 22%) were achieved with the 80/Kc and 160/Kc mm treatments, respectively. Input water productivity of the 160 mm treatment was 0.06 kg/m3 (8%) higher than the control in Year 1, while in Year 2 a 0.15 kg/m3 (17%) increase in input water productivity above the control was achieved by the 160/Kc mm treatment. Delaying the application of continuous flooding in the second year greatly extended the period of crop growth suggesting the need for earlier sowing (by 7-10 days) to ensure pollen microspore still occurs at the best time to minimise yield loss due to cold damage. Nitrogen fertiliser management is an important issue when delaying continuous flooding, and nitrogen losses appeared to increase with the frequency of irrigation prior to continuous flooding. This was likely due to increased denitrification from alternate wetting and drying of the soil. Further research is required to determine the most appropriate nitrogen management strategies, and to also better define the optimal pre-flood irrigation frequency.