首页> 外文期刊>Colloids and Surfaces, A. Physicochemical and Engineering Aspects >Study of polymer-enhanced emulsion flooding to improve viscous oil recovery in waterflooded heavy oil reservoirs
【24h】

Study of polymer-enhanced emulsion flooding to improve viscous oil recovery in waterflooded heavy oil reservoirs

机译:高分子增强乳液洪水的研究,提高水料重油储层粘性燃油回收

获取原文
获取原文并翻译 | 示例
           

摘要

Emulsion flooding is an effective enhanced oil recovery (EOR) process for waterflooded heavy oil reservoirs, which is not suitable for the application of thermal recovery methods because of economic issues or technical impediments. This study demonstrated the experimental investigation of polymer-enhanced emulsion to improve the viscous oil recovery in waterflooded heavy oil reservoirs. It was indicated in the emulsion stability and rheology studies that the polymer HPAM not only acted as a thickener to slow down the rate of creaming by increasing the water viscosity, but also enhanced the strength of O/W interface by increasing interfacial shear viscosity, resulting in a significant increase of the stability and bulk viscosity of emulsion system. The results of sandpack flooding tests showed that an incremental oil recovery of more than 30% of original oil in place (OOIP) over water flooding could be obtained by polymer-enhanced emulsion flooding for heavy oil with the viscosity of 350 mPa s at 50 degrees C. The micromodel flooding studies indicated that the EOR mechanisms of polymer-enhanced emulsion were attributed to the reduction in mobility ratio due to higher emulsion viscosity, resulting in dramatically improvement of sweep efficiency. Besides, biodiesel could reduce the heavy oil viscosity to improve the mobility of heavy oil, and the surfactant could emulsify the heavy oil in water to form O/W emulsions, thereby improving the displacement efficiency. The results of these studies showed that polymer-enhanced emulsion flooding is a promising process to improve oil recovery in waterflooded heavy oil reservoirs.
机译:乳液洪水是一种有效的加油储层油储层(EOR)工艺,这对于由于经济问题或技术障碍而言,不适合应用热回收方法。本研究表明了聚合物增强乳液的实验研究,以改善水上重油储层中的粘性油回收。乳液稳定性和流变学研究表明,聚合物HPAM不仅通过增加水粘度来减慢乳膏速率的增稠剂,还通过增加界面剪切粘度来增强O / W界面的强度,得到在乳液系统的稳定性和体积粘度的显着增加。 Sandpack泛滥试验的结果表明,通过聚合物增强的乳液洪水为重油,粘度为50度,可以通过聚合物 - 增强乳液泛滥获得超过30%的原始油(OoIP)的增量溢油。 C.微仪洪水研究表明,由于乳液粘度较高,聚合物增强乳液的EOR机理归因于迁移率降低,导致扫描效率显着提高。此外,生物柴油可以降低重油粘度以改善重油的迁移率,并且表面活性剂可以乳化水中的重油以形成O / W乳液,从而提高位移效率。这些研究的结果表明,聚合物增强的乳液洪水是一种有望的过程,可以改善水上型重油储层中的溢油。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号