Laser initiated Ti3SiC2 powder and coating synthesis

摘要

In the work the SHS synthesis of MAX phases from Ti-Si-C system were carried and initiated with use of 30 W laser beam with 40 pm spot. That kind of initiation allows locally and rapidly start the SHS synthesis and avoid the contamination coming from heating wire present during conventional method. The reaction was monitored by high-accuracy radiation pyrometer and high quality optical camera. The recorded data, together with reaction bed thermal conductivity measurements allowed to correlate to obtained powders composition and reaction speed. The reaction bed morphology was investigated by scanning electron microscopy with element distribution (EDS). The second part of the paper concerns laser reactive deposition of SHS in-situ synthetized MAX phases layer on silicon carbide substrate. The paths of deposited layer were formed under argon over-pressure of 2 bar using 120 W of laser power.