首页> 外文期刊>Journal of Agricultural Engineering >Biometric properties of plug vegetable seedlings relevant to the design of vegetable transplanter
【24h】

Biometric properties of plug vegetable seedlings relevant to the design of vegetable transplanter

机译:与植物移植器设计相关的插头蔬菜幼苗的生物统计性质

获取原文
获取原文并翻译 | 示例
           

摘要

In the present study, biometric properties of chilli (Pusa Jwala) and tomato (Abhilash) plug seedlings of 30-, 45- and 60-day old relevant to design of vegetable transplanter were investigated. The parameters determined were weight, stem diameter, height, critical canopy diameter, drop shatter height, compressive strength and coefficient of static friction of the plug seedlings. The average weight of chilli seedlings was 13.1, 15.2 and 15.9 g for 30-, 45- and 60-day old, respectively; whereas, that for tomato seedling was 13.4, 14.1 and 14.5 g for 30-, 45- and 60-day old, respectively. The optimum drop shatter height with minimum shattering of plug media for both seedlings was 400 mm. The critical canopy diameter for chilli and tomato seedling was 68.2 mm and 70.4 mm, respectively. The mean coefficient of static friction for canvas belt, mild steel, aluminium and galvanized iron varied from 0.63 to 0.89. The compressive strength of stem of seedlings ranged from 1.2 kgf to 1.6 kgf. These propertiesof vegetable seedlings are critical in designing and selection of different components of vegetable transplanter.
机译:在本研究中,研究了辣椒(PUSA jwala)和番茄(Abhilash)的生物识别性能为30-,45-和60天的与植物移植仪设计相关的蔬菜移植仪。确定的参数是重量,茎直径,高度,临界冠层直径,落后碎片高度,抗压强度和静电摩擦系数。 30-,45-和60天的辣椒幼苗的平均重量分别为13.1,5.2和15.9g;然而,对于番茄幼苗,分别为30-,45-和60天的番茄幼苗。具有最小拍摄幼苗的塞介质的最佳下降碎块高度为400毫米。辣椒和番茄幼苗的临界冠层直径分别为68.2毫米和70.4毫米。帆布带,温和钢,铝和镀锌铁的平均静摩擦系数为0.63至0.89。幼苗茎的抗压强度范围为1.2kgf至1.6kgf。这些蔬菜幼苗的这些性质对于设计和选择植物移植蛋白的不同组分至关重要。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号