...
首页> 外文期刊>Synthetic Metals >Spectroscopic and electrical evaluation of poly(3-hexylthiophene) nanotubules made using template wetting nanofabrication
【24h】

Spectroscopic and electrical evaluation of poly(3-hexylthiophene) nanotubules made using template wetting nanofabrication

机译:模板润湿纳米加工制备的聚(3-己基噻吩)纳米管的光谱和电学评价

获取原文
获取原文并翻译 | 示例
           

摘要

The unique properties of conjugated polymer nanostructures as compared to thin films of the same materials have fueled the investigation of a number of different polymer nanofabrication techniques. Here we examine the optoelectronic properties of poly(3-hexylthiophene)P3HT nanotubules made using one of the simplest of these techniques, template wetting nanofabrication. Comparison is made with results from our previous study in which in poly(2-methoxy-5-(2T-ethylhexyIoxy)-l,4-phenylene vinylene) (MEH-PPV) nanotubules prepared in this manner were shown to have dramatically different properties in comparison with thin films due to increased molecular order in the nanostructures. With semicrystalline P3HT, the differences are much more subtle, we believe due to the greater inherent order in this material. In P3HT nanotubules, a small bathochromic shift (~0.05 eV) in the onset of Uv-vis absorption was observed indicating increased long range order and a greater effective conjugation length in the polymer. Polarized FTIR spectroscopy indicated a small degree of preferential alignment of the inter-ring C-C bond with the axis of the nanotubules as the stretching vibration for this bond showed a dichroic ratio of 1.73. The degree of increased conjugation length and chain alignment in P3HT nanotubules indicated by both the UV-vis and polarized FTIR spectra were much smaller than that previously observed for MEH-PPV. No significant improvement in mobility as measured from the current voltage characteristics of simple single carrier devices based on the P3HT nanotubules was observed, in sharp contrast to previously studied MEH-PPV where more than an order of magnitude increase was seen. Unlike in amorphous MEH-PPV, the increase in molecular order suggested by spectral data was insufficient to significantly impact mobility of semicrystalline P3HT when using template wetting nanofabrication for either of the 100 or 200 nm nanotubules examined.
机译:与相同材料的薄膜相比,共轭聚合物纳米结构的独特性能推动了许多不同聚合物纳米制造技术的研究。在这里,我们研究了使用这些技术中最简单的一种(模板湿法纳米制造)制造的聚(3-己基噻吩)P3HT纳米管的光电性能。与我们以前的研究结果进行了比较,在该研究中,以这种方式制备的聚(2-甲氧基-5-(2T-乙基己氧基)-1,4-亚苯基亚乙烯基)(MEH-PPV)纳米管具有显着不同的性能与薄膜相比,由于纳米结构中分子序的增加。对于半晶体P3HT,由于这种材料固有的顺序更大,因此差异要细微得多。在P3HT纳米管中,观察到Uv-vis吸收开始时发生小的红移(〜0.05 eV),表明聚合物的长程有序增加和有效共轭长度增加。极化FTIR光谱表明,环间C-C键与纳米管轴的优先取向程度较小,因为该键的拉伸振动显示出1.73的二向色比。 UV-vis和极化FTIR光谱表明,P3HT纳米管中的共轭长度和链排列增加,其程度远小于以前观察到的MEH-PPV。与基于P3HT纳米管的简单单载流子器件的当前电压特性所测得的迁移率没有显着提高,这与先前研究的MEH-PPV形成了鲜明的对比,在MEH-PPV中观察到了超过一个数量级的增长。与在非晶态MEH-PPV中不同,光谱数据表明分子顺序的增加不足以显着影响半结晶P3HT的迁移率,这是针对所检查的100或200 nm纳米管使用模板湿法纳米加工时。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号