...
首页> 外文期刊>Journal of biomedical materials research. Part B, Applied biomaterials. >Biocompatibility response to modified Baerveldt glaucoma drains.
【24h】

Biocompatibility response to modified Baerveldt glaucoma drains.

机译:对改良的Baerveldt青光眼引流管的生物相容性反应。

获取原文
获取原文并翻译 | 示例
           

摘要

Glaucoma implants are designed to increase fluid outflow from the eye in order to decrease intraocular pressure and prevent damage to the optic nerve. The implant consists of a silicone tube that is inserted into the anterior chamber at one end and is attached at the other end to a silicone plate that is sutured to the outside of the globe beneath the conjunctiva. The glaucoma "implant" becomes a "drain" over the first 3 to 6 postoperative weeks as the silicone plate is enclosed by a fibrous capsule that allows a space to form into which fluid can drain and from which fluid can be absorbed by the surrounding tissues. Ideally, the size and thickness of the capsule (the filtering bleb) that surrounds the plate is such that the amount of fluid that passes through the capsule is identical to the amount of fluid produced by the eye at an intraocular pressure of 8 to 14 mmHg. The most common long-term complication of these implants is failure of the filtering bleb 2 to 4 years after surgery due to the formation of a thick fibrous capsule around the device. Micromovement of the smooth drainage plate against the scleral surface may be integral to the mechanism of glaucoma implant failure by stimulating low-level activation of the wound healing response, increased collagen scar formation, and increased fibrous capsule thickness. To test this hypothesis, we modified seven Baerveldt implants by adding porous cellular ingrowth material to the posterior surface of the drainage plate. Seven modified and five unmodified implants were placed in adult rabbit eyes. After 6 months, we found that the fibrous capsule around the modified implants was significantly thinner than the capsule surrounding the unmodified implants (p < 0.05), particularly on the surface between the porous ingrowth material and the sclera (p < 0.05). Although type I collagen predominated in the fibrous capsules around both types of implants, the amount of type III collagen in the capsules around the modified implants was significantly less than the amount around the unmodified implants (p < 0.05). We believe that these data suggest a reduction in the wound healing response to the modified implants, with greater stability of capsule thickness. Long-term studies are needed to verify that the stability of the capsules around the modified implants persists over a period of years, in which case this type of modification may prove useful in prolonging the functional life of these devices in the surgical treatment of glaucoma.
机译:青光眼植入物旨在增加从眼中流出的液体,以降低眼内压并防止对视神经的损害。植入物由一根硅胶管组成,该硅胶管的一端插入前房,另一端连接到硅胶板上,该硅胶板缝合到结膜下方的球体外侧。青光眼的“植入物”在术后的最初3到6周内变成“排水管”,因为硅树脂板被纤维状囊包裹,从而形成了一个空间,液体可以排入其中,周围组织可以吸收液体。理想情况下,包围平板的胶囊(过滤泡)的尺寸和厚度应确保通过胶囊的液体量与眼内压力为8至14 mmHg时眼睛产生的液体量相同。 。这些植入物最常见的长期并发症是手术后2至4年,由于在装置周围形成了厚的纤维囊,导致滤泡失效。通过刺激伤口愈合反应的低水平激活,增加的胶原蛋白疤痕形成和增加的纤维囊厚度,光滑的引流板对着巩膜表面的微动可能是青光眼植入失败的机制必不可少的。为了验证该假设,我们通过在引流板的后表面添加多孔的细胞向内生长材料来修改了七个Baerveldt植入物。将七只改良的和五只未经改良的植入物置于成年兔眼中。 6个月后,我们发现改性植入物周围的纤维囊比未改性植入物周围的囊明显薄(p <0.05),特别是在多孔长入材料和巩膜之间的表面上(p <0.05)。尽管两种植入物周围的纤维囊中I型胶原占主导地位,但改性植入物周围的囊中III型胶原的量明显少于未改性植入物周围的量(p <0.05)。我们相信,这些数据表明对改良的植入物的伤口愈合反应的降低,以及胶囊厚度的更大稳定性。需要进行长期研究,以验证修饰的植入物周围的胶囊的稳定性会持续数年,在这种情况下,这种类型的修饰可证明有助于延长这些装置在青光眼的外科治疗中的功能寿命。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号