...
首页> 外文期刊>Polimery >Investigations of UV-crosslinkable water-soluble acrylic pressure-sensitive adhesives
【24h】

Investigations of UV-crosslinkable water-soluble acrylic pressure-sensitive adhesives

机译:紫外线可交联的水溶性丙烯酸压敏胶的研究

获取原文
获取原文并翻译 | 示例
           

摘要

Titled adhesives based on acrylic acid(AA)or beta-acryloyloxy propionic acid(APA)and butyl aerylate(BA)were synthesized.Unsaturated photoinitiators were introduced into their chains,namely:4-acryloyloxy ben-zophenone(ABP),2-hydroxy-l-[4-(2-acryloyloxy-ethoxy)phenyl]-2-methyl--1-propanone(ZLI3331)or phenyl-l(l-acryloyloxy)-cyclohexyl ketone(PAC).These products were plastified with polyoxyethylene glycols(PEG)differing in molecular weight(400 -1010 Da)or polyoxypropylene glycols(PPG).The effects of chemical compositions of comonomers,plasticizer types and contents as well as effect of pH on the following basing properties of obtained aqueous adhesive systems(PSA)were investigated:water solubility,cohesion and adhesion.Dependence of water solubility of selected plasticized PSAs on UV curing time was also determined.PSA based on 70 wt.% of AA and 30 wt.% of BA with addition of 0.5 wt.% of ABP as photoinitiator/comonomer,plastified with 60 - 120 phr of PPG has been found as optimal.
机译:合成了丙烯酸(AA)或β-丙烯酰氧基丙酸(APA)和铝酸丁酯(BA)为标题的胶粘剂。将不饱和光引发剂引入其链中,即:4-丙烯酰氧基苯并二苯甲酮(ABP),2-羟基--1- [4-(2-丙烯酰氧基-乙氧基)苯基] -2-甲基-1-丙酮(ZLI3331)或苯基-1-(1-丙烯酰氧基)-环己基酮(PAC)。这些产品用聚氧乙二醇增塑(PEG)的分子量(400 -1010 Da)或聚氧丙二醇(PPG)的差异。共聚单体的化学组成,增塑剂类型和含量以及pH值对所得水性粘合剂体系(PSA)的以下基础性能的影响):水溶性,内聚性和粘附性。还测定了所选增塑PSA的水溶性对UV固化时间的依赖性.PSA以70%(重量)的AA和30%(重量)的BA为基础,添加0.5%(重量)已经发现,以60-120phr的PPG塑化的ABP作为光引发剂/共聚单体是最佳的。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号