首页>外文期刊>International Journal of Machining and Machinability of Materials

International Journal of Machining and Machinability of Materials

International Journal of Machining and Machinability of Materials

EI

中文名称：国际期刊的加工切削加工性能的材料

ISSN：1748-5711
出版周期：Quarterly

发文量：381

期刊论文

年度选择

2023
- 第1期
- 第2期
2022
- 第2期
- 第4期
- 第5期
- 第6期
2021
- 第1期
- 第2期
- 第3期
- 第4期
- 第6期
2020
- 第1期
- 第2期
- 第4期
- 第5期
- 第6期
2019
- 第2期
- 第3期
- 第4期
- 第6期
2018
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2017
- 第1期
- 第2期
- 第3期
- 第4期
- 第5期
- 第6期
2016
- 第2期
- 第3期
- 第4期
- 第6期
2015
- 第1期
- 第2期
- 第4期
- 第5期
- 第6期
2014
- 第1期
- 第2期
- 第4期
2013
- 第1期
- 第2期
- 第3期
- 第4期
2012
- 第1期
- 第2期
- 第3期
- 第4期
2011
- 第2期
- 第3期
- 第4期
2010
- 第2期
- 第4期
2009
- 第1期
- 第2期
- 第3期
- 第4期
2008
- 第1期
- 第2期
- 第3期
- 第4期

更多>>

全选（0）

1.Effects of milling methods and cooling strategies on tool wear, chip morphology and surface roughness in high speed end-milling of Inconel-718

机译：铣削方法及冷却策略对Inconel-718高速端铣刀工具磨损，芯片形态和表面粗糙度的影响
- 作者：Anthony Chukwujekwu Okafor;Paras Mohan Jasra
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2019年第2期
2.Tool wear deceleration in turning of Inconel 625

机译：刀具磨损在inconel 625的转弯时减速
- 作者：Mohammad Lotfi;Ali Akhavan Farid;Mehran Jahanbakhsh
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2019年第4期
- Inconel 625;
- turning;
- wear;
- ANFIS;
- carbide;
- optimisation;
3.Modelling and analysis of roughness characteristics of aluminium alloy under CNC face milling operation

机译：CNC面铣削铝合金粗糙度特性的建模与分析
- 作者：Jishu Das;Dibyendu Laya;Sandip Basu;Supriyo Roy
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2018年第4期
- CLA;
- ten point height;
- CNC machining;
- stylus profilometer;
- artificial bee colony algorithm;
- genetic algorithm;
- multi-objective optimisation;
4.Nonlinear modelling of roughness parameters in finish turning of EN31 high carbon steel

机译：EN31高碳钢结束转动中粗糙度参数的非线性建模
- 作者：Kanishka Jha;Ravinder Kumar;Jagesvar Verma;Ravinder Kataria
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2018年第5期
- hard turning;
- optimisation;
- surface roughness;
- high carbon steel;
5.Studies on surface quality of stainless steel implant material while machining with WEDM process

机译：用WEDM工艺加工时，不锈钢植入材料表面质量研究
- 作者：S. Sivakumar;M. Adam Khan;B. Muralidharan
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2020年第5期
- implant;
- steel;
- wire electrical discharge machining;
- WEDM;
- scanning electron microscope;
- SEM image;
- spectroscopic;
- EDS;
- material removal rate;
- MRR;
- surface roughness;
- Ra;
6.Coupled Eulerian-Lagrangian technique for microcutting FE-modelling of AISI1045 steel

机译：耦合Eulerian-Lagrangian AISI1045钢微固化Fe型造型技术
- 作者：Ali Afsharhanaei;Paolo Parenti;Massimiliano Annoni
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2019年第3期
- Finite element method;
- Micro cutting;
- Coupled eulerian lagrangian;
- Cutting forces;
- Chip thickness;
- Tool tip temperature;
7.Evaluation of surface damage mechanisms and optimisation of cutting parameters in turning of N-155 iron-nickel-base superalloy

机译：基于N-155铁镍基超合金转向切削参数的表面损伤机理及优化评价
- 作者：Behnam Davoodi;Behzad Eskandari
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2019年第2期
- surface damage mechanisms;
- mechanics of cutting;
- optimisation;
- iron-nickel-base superalloy;
8.Machining of aluminium-based metal matrix composite - a particle swarm optimisation approach

机译：基于铝制金属矩阵复合材料的加工 - 一种粒子群优化方法
- 作者：Diptikanta Das;Vivek Chakraborty;Bijaya Bijeta Nayak;Mantra Prasad Satpathy;Chandrika Samal
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2020年第1期
- metal matrix composite;
- MMC;
- turning;
- regression;
- analysis of variance;
- particle swarm optimisation;
9.Machining performance optimisation of MQL-assisted turning of Inconel-825 superalloy using GA for industrial applications

机译：使用GA用于工业应用的MQL辅助转动Inconel-825高温合金的加工性能优化
- 作者：S.K. Tamang;M. Chandrasekaran;K. Palanikumar;Ramanathan M. Arunachalam
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2019年第2期
- Inconel 825;
- machining;
- minimum quantity lubrication;
- MQL;
- tool wear;
- cutting temperature;
- surface roughness;
- optimisation;
10.Multi response optimisation of machining parameters in EDM of dual particle (MWCNT + B₄C) reinforced sintered composites

机译：双粒子EDM加工参数的多响应优化（MWCNT + B _{4 C）增强烧结复合材料}
- 作者：S. Dhandapani;T. Rajmohanr;D. Vijayan;K. Palanikumar
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2018年第5期
- metal matrix nano composites;
- MMNC;
- electrical discharge machining;
- EDM;
- metal removal rate;
- MRR;
- surface roughness;
- SR;
- tool wear rate;
- TWR;
- genetic algorithm;
- GA;
11.Increasing productivity in hard turning of steels using CVD-coated carbide

机译：使用CVD涂层碳化物的硬质转弯的生产率提高
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2020年第4期
- flank wear;
- metal removal rate;
- surface roughness;
- triple-layer coating;
- volume of material removal;
12.Application of Taguchi method in determining laser cutting quality of ultra high strength steel

机译：TAGUCHI方法在确定超高强度钢的激光切割质量
- 作者：Abdul Fattah Mohd Tahir;Muhammad Zaki Yusup
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2018年第6期
- CO2 laser;
- laser cutting 22MnB5;
- ultra-high strength steel;
- UHSS;
- Taguchi method;
- ANOVA;
- kerf width;
- heat affected zone;
- HAZ;
13.Multi-quality characteristics optimisation on WEDM for Ti-6Al-4V using Taguchi-grey relational theory

机译：用TAGUCHI灰色关系理论对TI-6AL-4V的多质量特性优化
- 作者：Neeraj Sharma;Rajesh Khanna;Yogesh Kumar Sharma;Rahul Dev Gupta
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2019年第2期
- wire-cut electrical discharge machine;
- WEDM;
- Ti-6Al-4V;
- ANOVA;
- GRA;
- multi-response optimisation;
- scanning electron microscopy;
- SEM;
14.Machining of thin sections using multi-pass wire electrical discharge machining process

机译：使用多通线电气放电加工过程加工薄片
- 作者：Deba Kumar Sarma;Meinam Annebushan Singh
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2020年第1期
- wire electrical discharge machining;
- WEDM;
- multipass;
- thin wall;
- recast layer;
- Taguchi;
- regression;
- optimisation;
15.Experimental process to evaluate the minimum quantity lubrication technique using copper nanofluids in turning process

机译：试验方法评价使用铜纳米流体在转弯过程中的最小润滑技术
- 作者：M. Naresh Babu;V. Anandan;N. Muthukrishnan;M. Gajendiran
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2018年第6期
- VIKOR;
- turning;
- copper;
- nanofluids;
- minimum quantity lubrication;
16.On the curl and spring behaviour of CNC turned beryllium copper chips using computational image/video analysis

机译：CNC卷曲与弹簧行为使用计算图像/视频分析转向铍铜芯的曲线
- 作者：V.S. Sooraj;Narayana Nidish;Anand Nikhil;Chaudhary Priyanka
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2019年第4期
- machining;
- beryllium-copper;
- chip;
- curl;
- spring;
- stiffness;
17.Influence of process parameters on the ultrasonic assisted edge trimming of aerospace CFRP laminates using MQL

机译：使用MQL对航空航天CFRP层压板超声波辅助边缘修剪的影响
- 作者：Mohamed O. Helmy;M.H. El-Hofy;Hassan El-Hofy
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2020年第5期
- carbon fibre reinforced plastic;
- CFRP;
- edge trimming;
- ultrasonic;
- minimum quantity lubricant;
- MQL;
18.52.5Ti ₅Cu _17.9Ni _14.6Al ₁₀ metallic glass after grinding]]>

机译：<！[cdata [zr _{52.5的表面完整性研究 ti _{5 cu _{17.9 ni _{14.6 Al _{研磨后10 金属玻璃]]>}}}}}
- 作者：Bruno Lavisse;Nassim Mendil;Georges Kapelski;Xavier Cerutti;Alexis Lenain;Sébastien Gravier;Rémi Daudin
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2020年第5期
- bulk metallic glass;
- BMG;
- grinding;
- surface characterisation;
- thermal damaging;
19.Optimisation of turning parameters for minimising specific cutting energy with use of different cooling/lubricating techniques

机译：利用不同冷却/润滑技术，优化变频参数，从而最大限度地降低特定切削能量
- 作者：D. Cica;B. Sredanovic;S. Tesic;D. Kramar
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2020年第2期
- specific cutting energy;
- optimisation;
- Taguchi method;
20.Fabrication of cascade micropattern by maskless electrochemical micromachining

机译：通过无掩模电化学微机械制造级联微图案
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2020年第4期
- maskless EMM;
- cascade micropattern;
- reused textured tool;
- width overcut;
- depth;
- surface roughness;
21.Effect of cooling methods on dimensional accuracy and surface finish in reaming

机译：冷却方法对梁尺寸精度和表面光洁度的影响
- 作者：M. N. Islam;Brian Boswell
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2019年第3期
- Design-of-experiment;
- Dry reaming;
- MQL reaming;
- Flood reaming;
- Pareto ANOVA;
- Signal-to-noise ratio;
22.Optimisation of machining TI6AL4V alloy: numerical simulation and experimental verification

机译：优化加工Ti6Al4V合金：数值模拟与实验验证
- 作者：Alaa H. Jaafar;Haydar Al-Ethari
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2018年第5期
- Ti6Al4V;
- DEFORM-2D;
- optimisation;
- machining;
- response surface methodology;
- RSM;
- design of experiments;
- ANOVA;
- cutting temperature;
- main cutting force;
- surface roughness;
23.An approach to residual stress measurement in ball-end milling process on Ti-6Al-4V ELI titanium alloy

机译：Ti-6Al-4V Eli钛合金球终研磨过程中的残余应力测量方法
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2020年第4期
- X-ray diffraction;
- residual stress measurement;
- residual stress state;
- surface integrity;
- ball-end milling;
- Ti-6Al-4V titanium alloy;
24.Experimental investigation on friction drilling of stainless steel AISI 304

机译：不锈钢AISI 304摩擦钻井实验研究
- 作者：Shayan Dehghan;Mohd Idris Shah B. Ismail;Mohd Khairol Anuar B. Mohd Ariffin;B.T. Hang Tuah B. Baharudin;Amir Parnianifard
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2019年第4期
- friction drilling;
- difficult-to-machine material;
- hardness;
- tool wear;
- stainless steel;
25.4/Y₂O₃ composite by abrasive waterjet]]>

机译：<！[CDATA [在加工LAPO _{4 _{4 / y _{2 o _{3 复合材料中，通过研磨水jet，]]>}}}}
- 作者：K. Balamurugan;M. Uthayakumar;S. Sankar;U.S. Hareesh;K. Gopakumar K. Warrier
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2017年第5期
- abrasive waterjet;
- LaPO4/Y2O3 composite;
- material removal rate;
- MRR;
- kerf angle;
- surface finish;
- regression analysis;
- process correlation;
26.Effects of different cutting conditions on the surface roughness parameters of iron-copper-carbon powder metallurgy composites

机译：不同切削条件对铁 - 碳粉冶金复合材料表面粗糙度参数的影响
- 作者：Miklós Czampa;Istv??n Biro;Tibor Szalay
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2017年第5期
27.Investigation of mechanical properties and electrical discharge machining of LM25-RHA metal matrix composite

机译：LM25-RHA金属基质复合材料力学性能和电气放电加工研究
- 作者：Mohan Kumar Pradhan;Srikant Tiwari
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2017年第5期
28.Three-dimensional finite element simulation analysis of milling deformation of SiCp/Al composites thin-walled parts

机译：SICP / Al复合材料薄壁零件铣削变形的三维有限元仿真分析
- 作者：Shutao Huang;Yunan Liu;Keru Jiao;Jinquan Li
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2017年第5期
- SiCp/Al composites;
- thin-walled parts;
- finite element;
- milling;
- deformation;
29.Comparative evaluation on milled surface quality of GFRP composites by different end mill tools

机译：不同末端轧机工具GFRP复合材料碾磨表面质量的比较评价
- 作者：I.S.N.V.R. Prasanth;D.V. Ravishankar;M. Manzoor Hussain
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2017年第5期
30.Surface roughness characterisation of turned surfaces using image processing

机译：使用图像处理的转向表面的表面粗糙度表征
- 作者：J. Mahashar Ali;M. Murugan
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2017年第4期
- Surface roughness;
- Vision system;
- Image processing;
- Statistical parameters;
31.Effect of deep cryogenic treatment on machinability of Inconel 718 in powder-mixed EDM

机译：深冷冻处理对粉末混合EDM中的第718型无能的影响的影响
- 作者：Chinmaya P. Mohanty;Siba Sankar Mahapatra;Manas Ranjan Singh
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2017年第4期
- Powder-mixed EDM;
- Deep cryogenic treatment;
- DCT;
- MOPSO;
- NSGA II;
- Surface roughness;
- Electrode wear ratio;
- EWR;
- Material removal rate;
- MRR;
32.Multi-objective optimisation of cryogenic turning process using Taguchi-based grey relational analysis

机译：基于Taguchi的灰色关系分析，多目标优化低温转换过程
- 作者：P. Sivaiah;D. Chakradhar
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2017年第4期
- Cryogenic machining;
- Optimisation;
- Grey relational analysis;
- GRA;
- Cutting force;
- Flank wear;
- Surface finish;
- Material removal rate;
- MRR;
33.Surface topomorphy and roughness prediction in micro-ball-end milling using a CAD-based simulation

机译：使用基于CAD的模拟的微球端研磨表面拓扑和粗糙度预测
- 作者：Dimitrios Vakondios;Panagiotis Kyratsis;Antonios Lyronis;Aristomenis Antoniadis
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2017年第4期
- Micro-ball-end milling;
- CAD-based simulation;
- Surface topomorphy;
- Surface roughness;
34.An experimental study on end milling of titanium alloy (Ti-6Al-4V) under dry and minimum quantity lubrication conditions

机译：干燥和最小量润滑条件下钛合金（TI-6AL-4V）结束碾磨的实验研究
- 作者：V. Krishnaraj;B. Hari Krishna;Jamal Y. Sheikh-Ahmad
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2017年第4期
- End milling;
- Titanium alloy;
- Minimum quantity lubrication;
- MQL;
- TOPSIS;
- Micro hardness;
35.Experimental evaluation of the effect of workpiece heat treatments and cutting parameters on the machinability of Ti-10V-2Fe-3Al β titanium alloy using Taguchi's design of experiments

机译：工件热处理与切削参数对Ti-10V-2Fe-3Alβ钛合金的效果的实验评价使用Taguchi的实验设计
- 作者：Navneet Khanna;R. A. Rahman Rashid;Suresh Palanisamy
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2017年第4期
- Turning;
- β titanium;
- Cutting forces;
- Cutting temperature;
- Workpiece heat treatment;
- Taguchi design of experiments;
36.Experimental estimation of minimum quantity lubrication in turning on AISI 410 stainless steel

机译：AISI 410不锈钢开启最小数量润滑的实验估算
- 作者：M. Naresh Babu;G. Manimaran;N. Muthukrishnan
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2017年第6期
- turning;
- minimum quantity lubrication;
- MQL;
- coolant;
- orthogonal array;
37.Multi-agent team for engineering: a machining plan in intelligent manufacturing systems

机译：多功能工程团队：智能制造系统的加工计划
- 作者：Mirko Djapic;Ljubomir Lukic;Cristiano Fragassa;Ana Pavlovic;Aleksandra Petrovic
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2017年第6期
- multi-agent systems;
- CAPP systems;
- CNC systems;
- technology design;
- cutting processes;
38.Calibration of ball nose micro end milling operations for sculptured surfaces machining

机译：雕刻用于雕刻表面加工的球形微端研磨操作
- 作者：Gerardo Garcia-Garcia;Elisa V. V??zquez;Héctor R. Siller;Leopoldo Ruiz-Huerta;Alberto Caballero-Ruiz
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2017年第6期
- sculptured surfaces;
- ball nose;
- micro end milling;
- hardened steels;
- tool wear;
39.Parametric optimisation for surface roughness of AISI 4340 steel during turning under near dry machining condition

机译：近旱地干加工条件下的AISI 4340钢表面粗糙度的参数优化
- 作者：Milon D. Selvam;P. Senthil;N.M. Sivaram
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2017年第6期
- AISI 4340 steel;
- turning operation;
- near dry condition;
- surface roughness;
- Taguchi technique;
- genetic algorithm;
40.Analytical modelling of material removal process in the case of orthogonal cutting and worn tools

机译：正交切割工具的情况下材料去除过程的分析模型
- 作者：Ferdinando Salvatore;Tarek Mabrouki;Hédi Hamdi
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2017年第6期
- worn tool;
- orthogonal cutting;
- analytical modelling;
- plowing;
- spring back;
- burr;
41.A case-study on the mechanism of flank wear during laser-assisted machining of a titanium alloy

机译：钛合金激光辅助加工过程中侧面磨损机理的案例研究
- 作者：R.A. Rahman Rashid;Suresh Palanisamy;Shoujin Sun;M.S. Dargusch
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2017年第6期
- titanium;
- Ti-6Al-4V;
- laser-assisted machining;
- LAM;
- cutting forces;
- tool life;
- tool wear;
- diffusion wear;
- flank wear;
42.Optimisation of abrasive water jet cutting process parameters for AA5083-H32 aluminium alloy using fuzzy TOPSIS method

机译：使用模糊Topsis方法优化AA5083-H32铝合金磨蚀水射流工艺参数
- 作者：N. Yuvaraj;M. Pradeep Kumar
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2018年第2期
- abrasive water jet;
- AWJ;
- AA5083-H32;
- abrasive mesh size;
- jet impingement angle;
- fuzzy TOPSIS;
- scanning electron microscope;
- SEM;
43.Effect of process parameters in electric discharge machining of D2 steel and estimation of coefficient for predicting surface roughness

机译：D2钢电放电加工过程参数的影响及预测表面粗糙度系数的估计
- 作者：Deepak Doreswamy;Jatin Javeri
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2018年第2期
- electrical discharge machining;
- surface roughness;
- current;
- spark gap;
- pulse-on time;
- pulse-off time;
- Taguchi method;
44.Prediction model development for material removal rate in band sawing using dimensional analysis approach

机译：使用尺寸分析方法在带锯中材料去除率的预测模型开发
- 作者：Bhavesh G. Mewada;Harit K. Raval
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2018年第2期
- bandsaw machine;
- material removal rate;
- MRR;
- taguchi method;
- dimensional analysis;
- Buckingham Pi theorem;
45.Machining parameter optimisation for aviation aluminium-alloy thin-walled parts in high-speed milling

机译：高速铣削中航空铝合金薄壁件的加工参数优化
- 作者：Xin Zhang;Jian-wei Ma;Zhen-yuan Jia;De-ning Song
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2018年第2期
- thin-walled parts;
- aviation aluminium-alloy;
- machining parameter optimisation;
- surface roughness;
- high-speed milling;
46.A comparative study on the effectiveness of TiN, TiCN, and AlTiN coated carbide tools for dry micro-milling of aluminium, copper and brass at low spindle speed

机译：铝，铜和黄铜干燥微铣削铝，铜和Altin涂层碳化物工具的效果比较研究
- 作者：Muhammad P. Jahan;Gregory K. Arbuckle;Ann M. Rumsey
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2018年第2期
- micro-milling;
- machinability;
- aluminium;
- copper;
- brass;
- TiN coating;
- TiCN coating;
- AlTiN coating;
47.Milling force-based machining parameter optimisation for titanium-alloy surface

机译：基于钛合金表面的铣削力的加工参数优化
- 作者：Jian-Wei Ma;Zhen-Yuan Jia;De-Ning Song;Feng-Ze Qin;Xiao-Xuan Zhao;Li-Kun Si
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2018年第1期
- machining parameters;
- milling force;
- titanium alloy;
- curved surface;
- high-speed;
48.Application of utility concept approach for multi-response optimisation of wire electrical discharge machining during profile cutting of Inconel-625

机译：实用概念方法在Inconel-625轮廓切割过程中电线放电加工多响应优化的应用
- 作者：Sachin Ashok Sonawane;Mahesh Laxmikant Kulkarni
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2018年第1期
- wire electrical discharge machining;
- WEDM;
- profile cutting;
- Taguchi method;
- utility concept;
- overall utility index;
- kerf width;
- MRR;
- surface finish;
- overcut;
- surface topography;
49.Mechanical properties and cutting performance of TiCN-based cermets fabricated by spark plasma sintering

机译：火花等离子烧结制造的基于TICN的CERMET的机械性能和切割性能
- 作者：Siwen Tang;Deshun Liu;Pengnan Li;Lingli Jiang;Qiulin Niu
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2018年第1期
- cutting performance;
- mechanical properties;
- cermets;
- spark plasma sintering;
- SPS;
50.Analysis of the influence of input parameters of EDM on material removal rate and surface roughness for machining stainless steel 304

机译：EDM输入参数对加工不锈钢材料去除率和表面粗糙度影响的分析304
- 作者：Farooq Ahmed;Tae Jo Ko;Saood Ali
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2018年第1期
- EDM parameters;
- ANOVA analysis;
- material removal rate;
- MRR;
- surface roughness;
51.Experimental investigation on micro drilling of Inconel 718 super alloy

机译：Inconel 718超优合金微钻的实验研究
- 作者：T. Venkatesan;J. Jerald;J. Cyril Pilligrin;P. Asokan
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2018年第1期
- micro drilling;
- Inconel 718;
- Taguchi;
- diameter;
- speed;
- feed;
- force;
- temperature;
- grey relational analysis;
- GRA;
52.Investigations on the impact fracture of cemented carbide insert during heavy-duty cutting

机译：重型切割过程中硬质合金插入的影响骨折的研究
- 作者：Tong Wang;Li Liu;Yaonan Cheng;Genghuang He;Ming Xu
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2018年第1期
- heavy-duty cutting;
- cemented carbide;
- impact fracture;
- mechanical property;
53.Multi-optimisation of electric discharge machining parameters for cryogenically treated pure titanium using grey-Taguchi technique

机译：用灰度技术对低温处理的纯钛电气放电加工参数的多优化
- 作者：Sanjeev Kumar;Rupinder Singh;Ajay Batish;T.P. Singh;Rajdeep Singh
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2018年第3期
- electric discharge machining;
- EDM;
- analysis of variance;
- ANOVA;
- Taguchi;
- cryogenic treatment;
- grey relational analysis;
- GRA;
- optimisation;
54.Multi-response optimisation of machining parameters in electrical discharge machining of Al LM25/AlB₂ functionally graded composite using grey relation analysis

机译：AL LM25 / ALA1AL _{2 功能梯度复合材料电气放电加工加工参数的多响应优化}
- 作者：Sai Charan Katamreddy;Neeraj Punnath;N. Radhika
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2018年第3期
- electrical discharge machining;
- EDM;
- functionally graded materials;
- FGMs;
- multi-response optimisation;
- orthogonal array;
- grey relation analysis;
- GRA;
- analysis of variance;
- ANOVA;
55.Multi-objective statistical analysis and optimisation in turning of aluminium matrix particulate composite using genetic algorithms

机译：遗传算法铝基质颗粒复合材料转动多目标统计分析及优化
- 作者：Nikolaos A. Fountas;Georgios V. Seretis;Dimitrios E. Manolakos;Christopher G. Provatidis;Nikolaos M. Vaxevanidis
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2018年第3期
- multi-objective optimisation;
- statistical analysis;
- aluminium matrix particulate composites;
- AMPCs;
- stainless steel flakes;
- SSF;
- turning;
- genetic algorithms;
56.Micro-EDM induced surface modification of titanium alloy for biocompatibility

机译：微EDM诱导的钛合金用于生物相容性的表面改性
- 作者：M.P. Jahan;Farshid Alavi;Roan Kirwin;Rashef Mahbub
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2018年第3期
- Ti-6Al-4V;
- micro-EDM;
- surface modification;
- crater sizes;
- elemental composition;
- surface microhardness;
- biocompatibility;
57.Sustainable drilling of aluminium 6061-T6 alloy by using nano-fluids and Ranque-Hilsch vortex tube assisted by MQL: an optimisation approach

机译：MQL辅助纳米液和RANQUE-HILSCH涡旋管可持续钻铝6061-T6合金：优化方法
- 作者：GurRaj Singh;Vishal S. Sharma;Munish Kumar Gupta
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2018年第3期
- drilling;
- aluminium;
- optimisation;
- vortex;
- nano particles;
- swarm;
- foraging;
- desirability;
- analysis of variance;
- ANOVA;
- minimum quantity lubrication;
- MQL;
58.Micro milling of polymeric micro injected specimens with randomly oriented carbon nanotube fillers

机译：具有随机取向的碳纳米管填料的聚合物微注入样品的微铣削
- 作者：Claudia Pagano;Aldo Attanasio;Lara Rebaioli;Elisabetta Ceretti;Irene Fassi
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2020年第2期
- micro machining;
- micro milling;
- micro injection moulding;
- carbon nanotubes;
- polymer composites;
59.Experimental investigations on micro machining of high speed steel using WEDG

机译：使用WEDG的高速钢微加工实验研究
- 作者：V. Krishnaraj;M. Parthiban;R. Sindhumathi
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2019年第3期
- Wire electric discharge grinding;
- WEDG;
- High speed steel;
- Material removal rate;
- MRR;
- Surface roughness and circularity;
- Micro pins;
60.Experimental investigation and optimisation of WEDM process for machining maraging steel using neural network based Jaya algorithm

机译：基于神经网络的JAYA算法，使用基于神经网络加工钢的模拟方法的实验研究和优化
- 作者：Ruma Sen;Bikash Choudhuri;John Deb Barma;Prasun Chakraborti
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2018年第4期
- wire electric discharge machining;
- WEDM;
- maraging steel;
- BPNN;
- Jaya;
61.Powder additives influence on dielectric strength of EDM fluid and material removal

机译：粉末添加剂对EDM流体和材料去除的介电强度的影响
- 作者：S. Jeavudeen;H. Siddhi Jailani;M. Murugan
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2020年第1期
- powder mixed electrical discharge machining;
- PMEDM;
- metallic and abrasive powders;
- dielectric strength;
- gap voltage;
- material removal rate;
- MRR;
- tool wear index;
- TWI;
62.EDM machinability and parametric optimisation of 2014Al/Al₂O₃ composite by RSM

机译：2014年/ Al _{2 O _{3 Composite的EDM可加工性和参数优化}}
- 作者：Akhil Khajuria;Raman Bedi;Balbir Singh;Modassir Akhtar
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2018年第6期
- aluminium metal matrix composite;
- AMMC;
- material removal rate;
- MRR;
- tool wear rate;
- TWR;
- surface roughness;
- analysis of variance;
- response surface methodology;
- RSM;
63.Optimisation of turning parameters on heat treated INCOLOY 800H using cryogenically treated CVD tool with grey-based entropy method

机译：用灰色熵法使用低温处理的CVD工具优化热处理灌注800h的转向参数
- 作者：A. Palanisamy;T. Selvaraj
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2018年第5期
- INCOLOY 800H;
- microstructure;
- cryogenic treatment;
- entropy;
- wear test;
64.Investigations on machinability and machining stability of turning super duplex stainless steel

机译：转型超双工不锈钢的可加工性和加工稳定性的研究
- 作者：N. Subhash;T. Jagadeesha;Mohit Law
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2020年第5期
- super duplex stainless steel;
- SDSS;
- machinability;
- cutting force coefficients;
- dynamics;
- stability;
65.Chamfer drill geometric parameters optimisation by finite element simulation and experimental analysis

机译：倒角钻几何参数通过有限元模拟和实验分析优化
- 作者：Julius Caesar Puoza;Sampson Takyi Appiah;Tainyao Zhang;Bernard Aboagye
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2020年第5期
- chamfer drill;
- simulation;
- optimisation;
- surface roughness;
- cutting force;
66.Surface modification of ZE41A magnesium alloy using electrical discharge coating with semi sintered electrode

机译：用半烧结电极电气放电涂层表面改性Ze41a镁合金
- 作者：U. Elaiyarasan;V. Satheeshkumar;C. Senthilkumar
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2019年第6期
- ZE41A magnesium alloy;
- electrical discharge coating;
- EDC;
- response surface methodology;
- RSM;
- metal transfer rate;
- MTR;
- surface roughness;
67.Influence of vibration on mechanical polishing micro-structured surface using discrete element method

机译：不同元件法，振动对机械抛光微结构表面的影响
- 作者：Guilian Wang;Bingrui Lv;Li Liu;Bin Liu;Haibo Zhou
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2020年第1期
- polishing;
- vibration;
- micro-structured surface;
- discrete element method;
- DEM;
68.Hybrid Taguchi-GRA-PCA approach for multi-response optimisation of turning process parameters under HPC condition

机译：HPC条件下转换过程参数多响应优化的HybridGaguchi-Gra-PCA方法
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2020年第4期
- multi-response optimisation;
- MRO;
- Taguchi method;
- grey relational analysis;
- GRA;
- principal component analysis;
- PCA;
- high-pressure coolant;
- HPC;
69.Response optimisation in wire electrical discharge machining of AISI H11 tool steel using Taguchi - GRA approach

机译：使用TAGUCHI - GRA方法的AISI H11刀具钢丝电气放电加工响应优化
- 作者：M. Vignesh;R. Ramanujam
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2018年第5期
- wire electrical discharge machining;
- WEDM;
- recast layer;
- microstructure;
- fatigue life;
- grey relational analysis;
- GRA;
70.Parametric optimisation in dry drilling of low carbon steel, grey cast iron and bakelite

机译：低碳钢，灰铸铁和胶木干燥钻井的参数优化
- 作者：Tapas Banerjee;Asish Bandyopadhyay;Pradip Kumar Pal
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2018年第4期
- drilling;
- surface finish;
- cutting vibration;
- multi-objective optimisation;
- Taguchi;
- multi-response performance index;
- MPI;
71.Effect of wear progression in an 'S'-type mixed ceramic tool on machining forces and surface roughness in the turning of hardened AISI 4140 steel

机译：磨损进展在硬化AISI 4140钢转向加工力和表面粗糙度中的“型混合陶瓷工具”中的影响
- 作者：Jeferson Hilario W. Nicolodi;Luiz Airton Consalter;Orlando Duran;Andre Joao de Souza
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2019年第3期
- Tool wear;
- Cutting forces;
- Ceramic tool microgeometry;
- Surface roughness;
- Turning of hardened steel;
72.Forming and finishing surface by sequential electrochemical-electrodischarge machining of precision magnetic optics parts

机译：通过顺序电化学 - 电沉积加工切割精密磁光零件的形成和精加工
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2020年第4期
73.Optimisation of spark erosion machining process parameters using hybrid grey relational analysis and artificial neural network model

机译：混合灰关系分析和人工神经网络模型的优化火花腐蚀加工过程参数
- 作者：N. Manikandan;Ramesh Raju;D. Palanisamy;J.S. Binoj
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2020年第1期
- electrical discharge machining;
- EDM;
- hard materials;
- haste alloy;
- Taguchi's methodology;
- form and orientation tolerances;
- grey relational analysis;
- GRA;
- artificial neural network;
- ANN;
74.Effects of density and microstructure on surface integrity of HIP materials

机译：密度和微观结构对髋关节材料表面完整性的影响
- 作者：F.J. Sun;S.G. Qu;F. Su;Z.H. Deng
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2019年第6期
- Ti-6Al-4V;
- hot isostatic pressing;
- HIP;
- density;
- microstructure;
- surface integrity;
- micro-void;
75.A comparative study on the surface finish achieved during face milling of AISI 1045 steel components using eco-friendly cutting fluids in near dry condition

机译：在干燥条件下使用环保切削液面铣削AISI 1045钢结构面铣削表面光洁度的比较研究
- 作者：Milon Selvam Dennison;M. Abisha Meji;A.J.R. Nelson;S. Balakumar;K. Prasath
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2019年第6期
- AISI 1045;
- near dry machining;
- NDM;
- eco-friendly cutting fluids;
- face milling;
- vertical machining centre;
- VMC;
- Taguchi technique;
- analysis of variance;
- ANOVA;
76.Study on grinding-chemical machining of Al7075

机译：AL7075研磨化学加工研究
- 作者：Abdolhamid Azizi;Pooya Bahrami
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2019年第6期
- chemical machining;
- surface roughness;
- etching;
- grinding;
- machining;
- material removal rate;
- loading;
- hybrid machining;
- grinding ratio;
- machining efficiency;
77.Material subtraction study of AISI T-15-HSS by wire cut electrical discharge machining (CNC-wire cut EDM) based on Taguchi grey relational analysis

机译：基于Taguchi灰色关系分析的钢丝切割电气放电加工（CNC-Wire Cut EDM）材料减法研究
- 作者：K. Chockalingam;N. Jawahar;N. Muralidharan;K. L. Jeyaraj
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2019年第3期
- AISI t-15;
- Tungsten high speed steel;
- CNC wire EDM;
- Taguchi;
- Grey relational analysis;
78.Performance evaluation of cryogenically treated and tempered tungsten carbide insert on face milling of grey cast iron

机译：低温处理和钢化钨碳化物插入灰铸铁脸铣削的性能评价
- 作者：M. Padmakumar;D. Dinakaran
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2017年第2期
- Cryogenic treatment of metals;
- Tungsten carbide insert;
- Tool life;
- Face milling;
- Grey cast iron;
- Flank wear;
- Nose wear;
79.Machinability studies on Al7075-based hybrid composites reinforced with SiC, graphene and CNT

机译：用SiC，石墨烯和CNT加固Al7075的混合复合材料的可加工性研究
- 作者：J.P. Ajithkumar;M. Anthony Xavior
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2021年第1期
- hybrid composites;
- graphene;
- surface roughness;
- wear;
- multi-wall carbon nanotube;
- MWCNT;
80.Analysis of surface texture of bulk metallic glass in micro electrical discharge drilling

机译：微电路放电钻孔散装金属玻璃表面纹理分析
- 作者：Swapan Barman;Ram Prakash Sharma;Asit Baran Puri
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2017年第3期
81.Machining austempered ductile iron - impact of the cutting edge geometry on tool wear and surface quality

机译：加工奥斯特型球墨铸铁 - 切削刃几何形状对工具磨损和表面质量的影响
- 作者：J?rg Hartig;Benjamin Kirsch;Jan C. Aurich
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2021年第3期
- cutting edge design;
- tungsten carbide;
- austempered ductile iron;
- ADI;
- turning;
- drilling;
- tool wear;
- surface roughness;
- machining;
- machinability;
- PVD coating;
- optimisation;
82.Finite element modelling and characterisation of chip curl in nose turning process

机译：鼻转动过程中芯片卷曲的有限元建模与表征
- 作者：Ashwin Devotta;Tomas Beno;Ronnie Lof
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2017年第3期
- Machining;
- Chip-up-curl;
- Chip-side-curl;
- Chip shape;
- Computed tomography;
- CT;
- Finite element model;
- Chip side flow angle;
- Johnson cook model;
- Coulomb friction model;
- Advantedge;
- High speed videography;
83.4/Y₂O₃ composite by abrasive waterjet]]>

机译：<！[CDATA [在加工LAPO _{4 _{4 / y _{2 o _{3 复合材料中，通过研磨水jet，]]>}}}}
- 作者：K. Balamurugan;M. Uthayakumar;S. Sankar;U.S. Hareesh;K. Gopakumar K. Warrier
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2017年第5期
- abrasive waterjet;
- LaPO4/Y2O3 composite;
- material removal rate;
- MRR;
- kerf angle;
- surface finish;
- regression analysis;
- process correlation;
84.An application of fuzzy logic with grey relational technique in grinding process using nano Al ₂O ₃ grinding wheel on Ti-6Al-4V alloy

机译：模糊逻辑用灰色关联技术在轧型轧机过程中使用纳米Al _{2 O _{3 研磨轮在Ti-6Al-4V合金中的研磨工艺}}
- 作者：Deborah Serenade Stephen;Prabhu Sethuramalingam
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2021年第1期
- abrasive grinding;
- material removal rate;
- MRR;
- nano Al2O3grinding wheel;
- surface roughness;
- grey relational analysis;
- GRA;
- fuzzy logic analysis;
85.Three-dimensional finite element simulation analysis of milling deformation of SiCp/Al composites thin-walled parts

机译：SICP / Al复合材料薄壁零件铣削变形的三维有限元仿真分析
- 作者：Shutao Huang;Yunan Liu;Keru Jiao;Jinquan Li
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2017年第5期
- SiCp/Al composites;
- thin-walled parts;
- finite element;
- milling;
- deformation;
86.Multi-objective optimisation of cryogenic turning process using Taguchi-based grey relational analysis

机译：基于Taguchi的灰色关系分析，多目标优化低温转换过程
- 作者：P. Sivaiah;D. Chakradhar
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2017年第4期
- Cryogenic machining;
- Optimisation;
- Grey relational analysis;
- GRA;
- Cutting force;
- Flank wear;
- Surface finish;
- Material removal rate;
- MRR;
87.Multiple performance characteristics optimisation in side and face milling of glass fibre reinforced polyester composite at different weightage of performances by grey relational analysis

机译：玻璃纤维增强涤纶复合材料侧面和面部研磨的多种性能特征优化灰色关系分析
- 作者：Ashutosh Roushan;Asish Bandyopadhyay;Simul Banerjee
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2017年第1期
- Glass fibre reinforced polyester;
- GFRP;
- Delamination;
- Material removal rate;
- MRR;
- Grey relational analysis;
88.Study of tool wear characteristics while machining mono and graphite reinforced hybrid zinc - aluminium-based MMCs

机译：刀具磨损特性研究单载和石墨加固杂交锌 - 基于铝基MMCS
- 作者：Rajaneesh N. Marigoudar;P.S. Shashidhar;Sadashivappa Kanakuppi;B.V. Dharmendra;T.S. Manjunatha
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2021年第3期
- hybrid MMC;
- stir casting;
- tool wear;
- abrasion;
- graphite;
- self-lubrication;
89.Improving the micro-electrical-discharge drilling performance of carbon fibre-reinforced polymer: role of assisting-electrode and shaped tool

机译：提高碳纤维增强聚合物的微放电钻孔性能：辅助电极和成型工具的作用
- 作者：Hrishikesh Dutta;Kishore Debnath;Deba Kumar Sarma
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2021年第2期
90.Performance evaluation of Cu-W-Si green P/M composite electrode for surface modification of P20+Ni steel using electrical discharge machine

机译：Cu-W-Si Green P / M复合电极用于使用电气放电机表面改性的Cu-W-Si绿色p / M复合电极的性能评价
- 作者：J.L. Ramdatti;A.V. Gohil;Vineet Jain;K.G. Dave
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2021年第3期
91.Surface morphology and effect of cutting force and temperature in formation of the white layer during hard machining

机译：硬加工过程中白层切割力和温度的表面形态及其影响
- 作者：Sanjib Kr Rajbongshi;Deba Kumar Sarma
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2021年第2期
- white layer;
- microhardness;
- cutting force;
- temperature;
92.Estimation of surface roughness in a turning operation using industrial big data

机译：工业大数据估算转动操作中的表面粗糙度
- 作者：Kaustabh Chatterjee;Jian Zhang;Uday Shanker Dixit
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2021年第3期
- surface roughness;
- data analytics;
- multiple-linear regression;
- turning;
- outliers;
- machining;
- Cook's distance;
93.The problem of determining the ploughing forces

机译：确定耕作力的问题
- 作者：Alexey Popov;Iuliia Krasnikova
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2021年第1期
- cutting speed;
- ploughing forces;
- turning;
- uncut chip thickness;
- wear;
94.Diamond turning of optical materials: a review

机译：钻石转动光学材料：综述
- 作者：Bhaskar Goel;Sehijpal Singh;RamaGopal V. Sarepaka;Vinod Mishra;Neha Khatri;Vivek Aggarwal;Keshva Nand;Raj Kumar
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2021年第2期
- single-point diamond turning;
- grey relational analysis;
- profile error;
- ductile regime machining;
- surface roughness;
- sub-surface damage;
- SSD;
- waviness error;
95.Study on characteristics of AlTiN and TiCN coating layers deposited on carbide cutting tools in hard turning of steel: experimental, simulation and optimisation

机译：钢铁钢化碳化物切削工具沉积岩浆和TICN涂层特性研究：实验，仿真和优化
- 作者：Armansyah Ginting;Che Hassan Che Haron;Issam Bencheikh;Mohammed Nouari
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2021年第1期
- volume of material removal;
- VMR;
- orthogonal cutting;
- cutting temperature;
- finite element method;
- multi-objective genetic algorithm;
- MOGA;
96.Effect of rake surface textures spacing and width on the cutting performance of inserts in dry machining of titanium alloy

机译：耙表面纹理间距和宽度对钛合金干加工切割性能的影响
- 作者：Amal S. Siju;Sachin D. Waigaonkar
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2021年第2期
- surface texturing;
- single point cutting tool;
- coefficient of friction;
- chip-morphology;
- machinability;
- Ti alloy;
97.Optimal cutting state predictions in internal turning operation with nano-SiC/GFRE composite layered boring tools

机译：纳米SiC / GFRE复合层镗刀内部转动操作中的最佳切割状态预测
- 作者：Bonda Atchuta Ganesh Yuvaraju;Bijoy Kumar Nanda;Jonnalagadda Srinivas
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2021年第1期
- boring bar;
- passive damping;
- nanocomposites;
- tool vibration;
- surface roughness;
- modal parameters;
- stability lobes;
- design of experiments;
- analysis of variance;
- neural network;
- optimisation;
98.Experimental study of orthogonal cutting of unidirectional CFRP laminates

机译：Experimental study of orthogonal cutting of unidirectional CFRP laminates
- 作者：Florent Blanchet;Frédéric Lachaud;Robert PiquetYann Landon
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2020年第6期
- CFRP;
- drilling;
- orthogonal cutting;
- machining;
- planning;
- cutting angle;
- fibre orientation;
- surface topology;
- confined plies;
- unidirectionnal;
- damage;
- sub-surface damage;
99.Parametric study of indigenously developed electrochemical diamond cut-off grinding setup using Inconel 925

机译：Parametric study of indigenously developed electrochemical diamond cut-off grinding setup using Inconel 925
- 作者：Raju Singh;Audhesh Narayan
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2022年第5期
- Electrochemical diamond cut-off grinding;
- ECDCG;
- Electrochemical grinding;
- ECG;
- Material removal rate;
- MRR;
- Surface roughness;
- Overcut;
- Inconel 925;
- One parameter at a time method;
- OPAT;
100.Manufacture of soybean extruder screws using a lathe with a whirling attachment

机译：Manufacture of soybean extruder screws using a lathe with a whirling attachment
- 作者：Zlatko Botak;Katarina Pisacic;Marko HorvatMirko Ficko
- 期刊名称：《International Journal of Machining and Machinability of Materials》 | 2022年第5期
- Whirling process;
- Thread cutting;
- Surface quality;
- Extruder screw;

客服邮箱：kefu@zhangqiaokeyan.com

京公网安备：11010802029741号 ICP备案号：京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有出版物经营许可证

客服微信
服务号