首页>外文会议>其他>Proceedings of the 2009 international conference on mechanical and electrical technology.

Proceedings of the 2009 international conference on mechanical and electrical technology.

召开年：
召开地：
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.OPTIMAL DESIGN OF BACKHOE ATTACHMENT IN BACKHOE LOADER

机译：反铲装载机的反铲附件的优化设计
- 作者：JI PENG;ZHANG XIANGZHOU
- 会议名称：《Proceedings of the 2009 international conference on mechanical and electrical technology.》 | 2009年
2.NUMERICAL SIMULATION OF THE AIR BEARING FILM IN THE HEAD-DISK INTERFACE OF HARD DISK DRIVES BY USING MESHLESS LOCALL PETROV-GALERKIN METHOD

机译：用无网格LOCALL PETROV-GALERKIN方法对硬磁盘驱动器磁头-磁盘界面中空气膜的数值模拟
- 作者：SHI B.J.;WANG J.Y.;YANG T.Y.;SONG S.J.
- 会议名称：《Proceedings of the 2009 international conference on mechanical and electrical technology.》 | 2009年
3.CRITICAL SUCCESS FACTORS FOR ADVANCED MANUFACTURING TECHNOLOGY (AMT)

机译：先进制造技术（AMT）的关键成功因素
- 作者：ZAHARI TAHA;FARZAD TAHRIRI
- 会议名称：《Proceedings of the 2009 international conference on mechanical and electrical technology.》 | 2009年
4.Design, simulation and construction of two synchronized DC motors' driver for EVs

机译：电动汽车用两个同步直流电动机驱动器的设计，仿真和构造
- 作者：HOSSEIN MOUSAZADEH;ARZHANG JAVADI;KAREN ABRINIA;ALIREZA KEYHANI;HOSSEIN MOBLI;Ahmad Sharifi
- 会议名称：《Proceedings of the 2009 international conference on mechanical and electrical technology.》 | 2009年
- Duty cycle;
- Motor driver;
- PID control;
- Simulink;
- Unit step.;
5.THEORETICAL ANALYSIS OF SLIDING FRICTION CONTACT BETWEEN FRICTION LINING AND WIRE ROPE

机译：摩擦衬片与钢丝绳之间滑动摩擦接触的理论分析
- 作者：YUXING PENG;GUOAN CHEN;ZHENCAI ZHU;BINBIN LIU
- 会议名称：《Proceedings of the 2009 international conference on mechanical and electrical technology.》 | 2009年
6.DESIGN AND SIMULATION OF HEAT DISSIPATION SYSTEM FOR HV POWER HOUSE OF THE SEAFLOOR JUNCTION BOX

机译：海底接线盒高压动力房散热系统的设计与仿真
- 作者：YU XUHAI;CHEN YANHU;YANG CANJUN;LI DEJUN;CHEN YING
- 会议名称：《Proceedings of the 2009 international conference on mechanical and electrical technology.》 | 2009年
7.WALKTHROUGH OF VIRTUAL NC MACHINING SCENE BASED ON OSG

机译：基于OSG的虚拟NC加工场景的漫游
- 作者：YUAN SHA;YU ZHEN;ZHENG HUI;CHEN DING-FANG;GUO YAN
- 会议名称：《Proceedings of the 2009 international conference on mechanical and electrical technology.》 | 2009年
8.DESIGN OF MULTI-PARAMETER MONITORING SYSTEM FOR HYDRAULIC DEEP HOLE DRILLING RIG

机译：液压深孔钻机多参数监测系统设计
- 作者：ZHANG MENG;YAO AIGUO;LEI WEIXIN;ZHANG JUNHUA
- 会议名称：《Proceedings of the 2009 international conference on mechanical and electrical technology.》 | 2009年
- hydraulic drilling rig;
- multi-parameter monitoring system;
- virtual instrument;
- deep hole;
9.RESEARCH ON EYRING-WEIBULL DISTRIBUTION BASED FOR ACCELERATED LIFE TEST OF CYLINDERS

机译：基于加速缸寿命试验的眼-魏布尔分布研究
- 作者：FU YONGLING;HAN GUOHUI;WAN ZHANLIN;CHEN JUAN
- 会议名称：《Proceedings of the 2009 international conference on mechanical and electrical technology.》 | 2009年
- Cylinder, accelerated life test;
- Eyring-Weibull distribution;
- temperature;
- velocity;
10.RESEARCH ON THE CUTTING CHARACTERISTIC OF OIL SLUDGE

机译：油泥切削特性的研究
- 作者：HONGLING HOU;YONGQIANG ZHAO;ZHIHUI QIU
- 会议名称：《Proceedings of the 2009 international conference on mechanical and electrical technology.》 | 2009年
- Cutting force;
- Cutting performance;
- Oil sludge;
- Model car;
- Regression analysts;
11.A NEW FORMULA ON FATIGUE CRACK PROPAGATION

机译：疲劳裂纹扩展的新公式
- 作者：Yi Zhenhua;Sun Sheng
- 会议名称：《Proceedings of the 2009 international conference on mechanical and electrical technology.》 | 2009年
- fatigue crack propagation;
- alternate load;
- inertial effect;
- crack starter angle;
- actual stress intensity factor;
12.MICRO END MILLING OF AISI 304 STAINLESS STEEL AND ANALYSIS OF MICRO SURFACE ROUGHNESS

机译：AISI 304不锈钢的微细铣削和微表面粗糙度分析
- 作者：MOHAMMAD YEAKUB ALI;KHAIRUL IRMAN OTHMAN;AHSAN ALI KHAN;MOHD ALIFF OMAR
- 会议名称：《Proceedings of the 2009 international conference on mechanical and electrical technology.》 | 2009年
13.DYNAMICS SIMULATION ANALYSIS OF BRIDGE CRANE HOISTING MECHANISM BASED ON ADAMS

机译：基于ADAMS的桥梁吊装机构动力学仿真分析。
- 作者：FENG MIN;XIAO HAN-BIN;LU SHI-QING;ZHANG ZHENG-YAN
- 会议名称：《Proceedings of the 2009 international conference on mechanical and electrical technology.》 | 2009年
14.INVESTIGATION OF MODULATION INDEX ON IRON LOSSES IN SOFT MAGNETIC MATERIALS SUPPLIED BY DMPWM INVERTER

机译：DMPWM逆变器提供的软磁材料中铁损的调制指数调查
- 作者：CHANWIT TANGSIRIWORAKUL;CHALERMCHAT MANOP
- 会议名称：《Proceedings of the 2009 international conference on mechanical and electrical technology.》 | 2009年
15.INTELLIGENT VIBRATION CONTROL OF STRUCTURES AGAINST EARTHQUAKES USING HYBRID DAMPER

机译：混合阻尼器对结构的智能振动控制
- 作者：A.ANVARI MOGHADDAM;F. SHABANI
- 会议名称：《Proceedings of the 2009 international conference on mechanical and electrical technology.》 | 2009年
- Tall buildings;
- Structural control active control;
- mass damper;
- structural dynamics;
- quadratic optimal control theory.;
16.INTEGRATION OF GENETIC ALGORITHM THERMOECONOMIC AND ENVIRONMENTAL OPTIMIZATION PROCEDURE WITH A POWER PLANT COMPUTER SIMULATOR

机译：电厂计算机仿真器的遗传算法热经济与环境优化集成。
- 作者：MOHAMMAD HASAN;LEILA KHOSHGOFTAR;MAJID AMIDPOUR
- 会议名称：《Proceedings of the 2009 international conference on mechanical and electrical technology.》 | 2009年
17.FLOW CHARACTERISTICS IN SHELL SIDE OF A NEW TYPE HEAT EXCHANGER

机译：新型换热器壳体内的流动特性
- 作者：LIU JIE;ZHANG HEPING
- 会议名称：《Proceedings of the 2009 international conference on mechanical and electrical technology.》 | 2009年
18.DEVELOPMENT OF HYBRID CONTROLLER OF WHEELED ROBOT FOR MINE DETECTION

机译：矿山轮式机器人混合控制器的研制。
- 作者：M.M.RASHID;M.A.HUSSAIN;M. RAISUDDIN KHAN
- 会议名称：《Proceedings of the 2009 international conference on mechanical and electrical technology.》 | 2009年
19.STUDY ON CONTROL SYSTEM OF SMART DEFLECTABLE WARHEAD OF TACTICAL MISSILE

机译：战术导弹智能偏转弹头控制系统研究
- 作者：JIAN WANG;JTAN-HONG NIE;XUE-CHENG YANG;FU-JUN HE;LIANG-XI LI
- 会议名称：《Proceedings of the 2009 international conference on mechanical and electrical technology.》 | 2009年
20.MODAL ANALYSIS OF BAOHUA RO-RO SHIP

机译：宝华滚装船的模态分析
- 作者：RUJIAN MA;MEIHUA DONG;DONG ZHAO;MENGHUA XU
- 会议名称：《Proceedings of the 2009 international conference on mechanical and electrical technology.》 | 2009年
21.SOME TRICKS OF MODELING A PERMANENT MAGNET MOTOR USING FINITE ELEMENT METHOD

机译：使用有限元方法建模永磁电动机的一些技巧
- 作者：LIU XIAOHONG
- 会议名称：《Proceedings of the 2009 international conference on mechanical and electrical technology.》 | 2009年
- Finite Element Modeling;
- Permanent Magnet Motor;
- Cogging Torque;
- Transient Analysis;
22.SPECTRAL ANALYSIS OF FINITE AMPLITUDE RANDOM WAVE LOADINGS

机译：有限振幅随机波载荷的谱分析
- 作者：GUIXI LI;RUJIAN MA;HAITING ZHANG
- 会议名称：《Proceedings of the 2009 international conference on mechanical and electrical technology.》 | 2009年
23.RELIABILITY ANALYSIS AND EVALUATION OF GAS SUPPLY SYSTEM

机译：供气系统可靠性分析与评估
- 作者：WANG XueMei;GONG MinQing;YANG JianFeng;ZHAO Ming
- 会议名称：《Proceedings of the 2009 international conference on mechanical and electrical technology.》 | 2009年
- System reliability;
- reliability characteristic quantity;
- Unit reliability;
- Reliability assessment;
- Reliability model;
24.3D FRAME STRUCTURAL ANALYSIS BASED ON IMPORTED GEOMETRY AT PREPROCESSING

机译：预处理中基于导入几何的3D框架结构分析
- 作者：VALENTINA M. POMAZAN;LUCIAN C. PETCU
- 会议名称：《Proceedings of the 2009 international conference on mechanical and electrical technology.》 | 2009年
25.A CONTACTLESS POWER TRANSMISSION SYSTEM FOR UNDERWATER VEHICLES

机译：水下车辆的无接触动力传输系统
- 作者：LI ZESONG;LIN LIN;CHEN YING;LIDEJUN;YANG CANJUN
- 会议名称：《Proceedings of the 2009 international conference on mechanical and electrical technology.》 | 2009年
26.Research on NC Machining of Contour Curve based on Vector Synthesis Interpolation of Conic Curves

机译：基于圆锥曲线矢量综合插值的轮廓曲线数控加工研究
- 作者：Dongri Shan;Qing Zhang
- 会议名称：《Proceedings of the 2009 international conference on mechanical and electrical technology.》 | 2009年
27.VIRTUAL PROTOTYPING OF THE MEGAWATT LEVEL WIND GENERATOR PLANETARY GEAR SPEEDER

机译：兆瓦级风力发电机行星齿轮减速机的虚拟原型
- 作者：ZHANG ZHENG-YAN;YU ZHEN;CHEN DING-FANG;BAI YUE-WEI;SHEN CHEN-LIN
- 会议名称：《Proceedings of the 2009 international conference on mechanical and electrical technology.》 | 2009年
28.AN EQUIVALENCE STUDY OF SMITH PREDICTOR AND INTERNAL MODEL CONTROLLER FOR PROCESS SYSTEMS

机译：过程系统的SMITH预测器和内部模型控制器的等效研究
- 作者：SATYA SHEEL;PRASHANT PRAKASH
- 会议名称：《Proceedings of the 2009 international conference on mechanical and electrical technology.》 | 2009年
29.FREE VIBRATION AND BUCKLING ANALYSIS OF RECTANGULAR PLATES UNDER NONUNIFORM NORMAL IN-PLANE LOADING

机译：平面内非均匀载荷下矩形板的自由振动和屈曲分析
- 作者：A.S. JAHANSHAHI;S.A. ATASHIPOUR
- 会议名称：《Proceedings of the 2009 international conference on mechanical and electrical technology.》 | 2009年
30.A NEW-TYPE WHEEL-LEGGED LUNAR ROVER AND ITS MOBILE PERFORMANCE ANALYSIS

机译：新型轮式月球车及其移动性能分析
- 作者：YONGMING WANG;XIAOLIU YU;RD WENCHENG TANG
- 会议名称：《Proceedings of the 2009 international conference on mechanical and electrical technology.》 | 2009年
- lunar rover;
- double-half-revolution mechanism;
- mobile system;
- mobile performance analysis;
31.VECTOR SYNTHESIS INTERPOLATION FOR CONE SPLINE

机译：锥样条线的矢量综合插值
- 作者：Dongri Shan;Tao Wang
- 会议名称：《Proceedings of the 2009 international conference on mechanical and electrical technology.》 | 2009年
32.NUMERICAL INVESTIGATION ON INFLUENCE OF NOZZLE SWIRL BLADE ON FLOW FIELD

机译：旋流叶片对流场影响的数值研究
- 作者：CHUAN LI;ZHAOJIE JIAO;QIBING YU;VAN ZHOU
- 会议名称：《Proceedings of the 2009 international conference on mechanical and electrical technology.》 | 2009年
- nozzle;
- CFD;
- atomization;
- numerical simulation;
- swirl blade.;
33.AUTOMATIC GROUND CONTROL POINT DATA COLLECTION THROUGH AUTONOMOUS MOBILE ROBOT

机译：通过自动移动机器人自动进行地面控制点数据收集
- 作者：YULIANG ZHANG;FENG GAO;LEI TIAN;TOFAEL AHAMED
- 会议名称：《Proceedings of the 2009 international conference on mechanical and electrical technology.》 | 2009年
34.RESEARCH ON ENERGY MANAGEMENT STRATEGY OF FUEL CELL/BATTERY HYBRID ELECTRIC AUTOMOBILE

机译：燃料电池/电池混合动力汽车的能源管理策略研究
- 作者：LI ZHIFENG
- 会议名称：《Proceedings of the 2009 international conference on mechanical and electrical technology.》 | 2009年
35.VIBRATION MEASUREMENT AND LOAD IDENTIFICATION OF OFFSHORE PLATFORMS

机译：海上平台的振动测量和载荷识别
- 作者：RUJIAN MA;GUIXI LI;JINSHAN LIN
- 会议名称：《Proceedings of the 2009 international conference on mechanical and electrical technology.》 | 2009年
36.Design of Super-precision Micro-feed Tool Carrier Based on GMM

机译：基于GMM的超精密微进给刀具架设计
- 作者：YU ZHEN;YUAN SHA;ZHENG HUI;ZHANG ZHENG-YAN;CHEN DING-FANG
- 会议名称：《Proceedings of the 2009 international conference on mechanical and electrical technology.》 | 2009年
37.A COMPARISON OF IRON LOSSES AND ACOUSTIC NOISE SUPPLIED BY PWM INVERTER OF DM AND SPWM TECHNIQUES

机译：DM和SPWM技术的PWM逆变器提供的铁损和声噪声的比较
- 作者：CHANWIT TANGSIRIWORAKUL;SIRTWICH TADSUAN
- 会议名称：《Proceedings of the 2009 international conference on mechanical and electrical technology.》 | 2009年
38.RESEARCH ON AUTOBODY PANELS DEVELOPMENTAL TECHNOLOGY BASED ON REVERSE ENGINEERING

机译：基于逆向工程的汽车面板开发技术研究
- 作者：YONGQIANG ZHAO;HONGLING HOU
- 会议名称：《Proceedings of the 2009 international conference on mechanical and electrical technology.》 | 2009年
- Reverse engineering;
- Autobody panels;
- Reconstructing surfaces;
- CNC milling machining;
39.DEVELOPMENT OF MATHEMATICAL MODEL FOR FRICTION STIR WELDING OF 304L STAINLESS STEEL

机译：304L不锈钢摩擦搅拌焊接数学模型的建立
- 作者：G KRISHNA MOHANA RAO;P PRASANNA;SUBBA RAO
- 会议名称：《Proceedings of the 2009 international conference on mechanical and electrical technology.》 | 2009年
40.RESEARCH AND IMPLEMENTATION OF DAMAGE ORIENTATION BY GENERAL RESIDUAL FORCE VECTOR

机译：一般残余力矢量对损伤定向的研究与实现
- 作者：HE WEI;HE RONG;LI YAWEI
- 会议名称：《Proceedings of the 2009 international conference on mechanical and electrical technology.》 | 2009年
41.OPTIMAL DESIGN FOR HIGH PRECISION STIFFNESS SURVEYING INSTRUMENT

机译：高精度刚度测量仪器的优化设计
- 作者：XIANGNING LU;GANG CHEN;ZIRONG TANG;TIELIN SHI;GUANGLAN LIAO;QI XIA
- 会议名称：《Proceedings of the 2009 international conference on mechanical and electrical technology.》 | 2009年
42.VIBRATION CONTROL FOR W12-1 PLATFORM BY CONSTRUCTION OF MEGA-BEAM STRUCTURE

机译：构造超大梁结构的W12-1平台振动控制
- 作者：DONG ZHAO;DONGMEI CAI;HUI TAN;SHAOLI CAI
- 会议名称：《Proceedings of the 2009 international conference on mechanical and electrical technology.》 | 2009年
43.SAFETY MONITORING SYSTEM FOR CRANE STRUCTURE BASED ON OPTICAL FIBER SENSOR

机译：基于光纤传感器的起重机结构安全监控系统
- 作者：LU SHIQING;XIAO HANBIN;DENG PING
- 会议名称：《Proceedings of the 2009 international conference on mechanical and electrical technology.》 | 2009年
44.CONSTRUCTION AND OPTIMIZATION OF NEW PLATFORMS BASED ON THE MEGA-FRAME THEORY

机译：基于巨型框架理论的新平台的构建与优化
- 作者：DONG ZHAO;DONGMEI CAI;HUI TAN;SHAOLI CAI
- 会议名称：《Proceedings of the 2009 international conference on mechanical and electrical technology.》 | 2009年