首页>外文会议>The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program

The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program

召开年：2007
召开地：Zhengzhou(CN)
出版时间：-

会议文集：-

会议论文

热门论文

全部论文

全选（0）

1.Effect of Reinforcement Speciality on Average Fracture Spacing of Reinforced Concrete Specimen

机译：钢筋种类对钢筋混凝土试件平均断裂间距的影响
- 作者：Juanxia ZHANG; Chun’an TANG; Xianzhang GUO; Xiuyan ZHOU; Shengguang ZHUO; Yandong PENG
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- 3D;
- Numerical test;
- Reinforcement concrete;
- Crack distribution;
2.Material Informatics using Micro features: Generation and Control

机译：使用微特征的材料信息学：生成和控制
- 作者：Sumitesh Das
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
3.Creep behavior of high strength low-alloy (HSLA) steel at elevated temperatures

机译：高强度低合金（HSLA）钢在高温下的蠕变行为
- 作者：Josip Brnic; Goran Turkalj; Marko Canadija; Domagoj Lanc
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- Mechanical properties;
- Room and elevated temperatures;
- Short time creep tests;
- ASTM A618 steel;
4.A Geometrical Simulation of Ball End Finish Milling Process and Its Application for the Prediction of Surface Topography

机译：球头精加工铣削的几何模拟及其在表面形貌预测中的应用
- 作者：Yujun Cai; Tieli Qi
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- Geometrical Simulation;
- Surface Topography;
- NC machining;
5.The effects of substrate temperature on the residual stress for EBPVD TBCs

机译：基板温度对EBPVD TBC残余应力的影响
- 作者：Yesheng Zhong; Liping Shi; Jia Yu; Xiaodong HE
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- thermal barrier coating;
- EBPVD technology;
- residual stress;
- numerical simulation;
6.Research on SMA wires actuator of flower robot

机译：花艺机械手SMA拉线执行器的研究
- 作者：H. L. Huang; J. O. Park
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- Shape Memory Alloy(SMA);
- actuator;
- stem structure;
- bending;
- flower robot;
7.Effect of Iron Content on the Properties of FePt Nanoparticels in Water in Oil Microemulsions

机译：铁含量对油微乳中水中FePt纳米粒子性能的影响
- 作者：Koay Mei Hyie; Iskandar Idris Yaacob
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- microemulsions;
- iron-platinum;
- nanoparticles;
8.Numerical Simulation on Laser Peen Forming of Metal sheet

机译：金属薄板激光喷丸成形的数值模拟
- 作者：Jian-zhong ZHOU; Yu-jie Fan; Shu HUANG; Su-qin Jiang; Jian-jun DU
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- laser peening;
- plate forming;
- residual stress;
- numerical simulation;
9.Research on Simulating of Controlled Rolling and Controlled Cooling Process for Mo Micro-alloy Steel

机译：Mo微合金钢控制轧制和控制冷却过程的模拟研究
- 作者：Li guiyan; Pang zhaofu; Zhaobaochun; Liuyonghao; Mahuixia
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- Mo Micro-alloy Steel;
- TMCP technology;
- Acicular ferrite;
10.Numerical Simulation of Induction Heating Process of Continuous Casting Slab

机译：连铸板坯感应加热过程的数值模拟
- 作者：Hao LIU; Liliang CHEN; Jianxin ZHOU
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- Casting slab;
- Induction heating;
- Finite Difference Method;
- Temperature distribution;
11.Investigation to the Damage Tolerance of Composite Cylinder for Vehicles by Numerical Simulation

机译：车用复合气缸损伤容忍度的数值模拟研究。
- 作者：XU YANHAI; LI YONGSHENG
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- Composite cylinder;
- CNG;
- Damage tolerance;
- Numerical simulation;
12.The Theoretical Calculation of the Contents of Si and Ni in Multi-composition Alloy Steel

机译：多元合金钢中Si和Ni含量的理论计算
- 作者：Yumei DAI; Xun WANG; Yujie DAI; Yongqing MA
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- Electronic and Atomic Scale；Cohesive Energy；Si Content；Ni Content；Alloy Design;
13.The Corrosion Behaviors of Heat-Treated SAE 8620 Steels

机译：热处理的SAE 8620钢的腐蚀行为
- 作者：Steven Hong; H.C. Lin; Y. Lee; T.S. Lian; L.Y. Tseng; K.M. Lin
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- SAE 8620 steel;
- heat treatment;
- microstructure;
- corrosion behavior;
- stress corrosion;
14.Study on Method Of The Multi Control Task And Synchronized Data Acquisition Of The Themo-mechanical simulator

机译：热力机械模拟器的多控制任务与同步数据采集方法研究
- 作者：SU Hai-long; WEI Jin; LUO Zong-an; ZHANG Dian-hua
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- Thermo-mechanical simulator;
- Real-Time Control and Synchronized Data Acquisition;
- Field Bus;
15.Three-dimensional thermo-mechanical finite element simulation for casting ladle structure under thermal loadings

机译：热载荷下钢包结构的三维热力有限元模拟
- 作者：Shouju LI; Yingxi LIU; He YU
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- casting ladle;
- thermo-mechanical loadings;
- thermo-stress;
- finite element method;
- temperature fields;
- thermal properties;
16.Numerical Simulation and Experimental Method for Auto-panel Forming Defects Analysis

机译：自动面板成形缺陷分析的数值模拟与实验方法
- 作者：HUIYU XIANG; CHONGJIE LENG; YUEXIAN ZHONG
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- Sheet Metal forming;
- FEM;
- Material processing;
- Automobile body panel;
17.Semi-enclosed Cold Forging Process Analysis and Progressive Die Design of CPU Fin

机译：CPU翅片半封闭式冷锻工艺分析及级进模设计
- 作者：Juan-hua SU; Feng-zhang Ren; Lei WANG
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- CPU fin;
- Two stage forging;
- Progressive die;
- Transfer unit;
- Finite element analysis;
18.Qualitative Physical Modeling and Experimental Study on Forging Method With Horizontal V-Shaped Anvil

机译：水平V形砧锻造方法的定性物理建模与实验研究。
- 作者：Liyong NI; Yongjun Zhang; Suoqing Yu; Zhubai Liu
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- Forging;
- Horizontal V-shaped anvil;
- Axial forging;
- Anisotropy;
- Textile flow direction;
19.Numerical and experimental investigation of electromagnetic riveting

机译：电磁铆接的数值和实验研究
- 作者：Jianghua DENG; Haiping YU; Chunfeng LI
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- electromagnetic riveting;
- numerical simulation;
- rivet deformation;
- composite;
20.A 3D Rigid-plastic FEM Simulation on Radius of Incremental In-plane Bending of Strip Metal

机译：条带金属面内弯曲半径的3D刚塑性有限元模拟
- 作者：Tang Wenting; Jin Li; Zhang jin; Yang He
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- incremental in-plane bending;
- 3D FEM simulation;
- bending radius;
21.A Numerical Model for Designing a Feeding and Gating System of Castings

机译：铸件浇注和浇注系统设计的数值模型
- 作者：Zhian Xu
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
22.Prediction on milling distortion for aero-monolithic multi-frame parts

机译：航空整体式多框架零件铣削变形的预测
- 作者：Hun GUO; Dun-Wen ZUO; Hai-Bin WU; Min WANG; Guo-Quan TONG
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- Milling Distortion;
- Monolithic Component;
- Multi-Frame;
- Finite Element Method;
23.Modelling of the transient cooling of coiled hot strip products by influence of the contact pressure

机译：卷材热轧带钢产品瞬态冷却的接触压力影响建模
- 作者：M Karlberg
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
24.3D-FE Modeling and Simulation of Rotary-draw Bending Process of Thin-walled Rectangular Tube

机译：薄壁矩形管拉拔弯曲过程的3D-FE建模与仿真
- 作者：Gangyao ZHAO; Yuli LIU; He YANG; Caihong LU; Ruijie GU
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- thin-walled rectangular tube;
- rotary draw bending;
- modeling;
- numerical simulation;
25.Effect of partial substitution of Nb by Al on Nb-poor Finemet type alloys

机译：Al对Nb的替代对贫Nb Finemet型合金的影响
- 作者：Haishun Liu; Chunhao Yin; Xiexing Miao; Dunhui Wang; Youwei Du
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- Permeability;
- Nanocrystalline alloy;
- Domain wall;
- Finemet;
- Magnetic properties;
26.The composition variation in evaporation of multi-component alloys by EB-PVD

机译：EB-PVD法蒸发多组分合金的成分变化
- 作者：Y. Xin; X.D. He; M.W. Li; Y. Sun
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- EB-PVD;
- multi-component alloy;
- activity coefficients;
- evaporation rate;
- composition variation;
27.Nonlinear Bending of the FGM Circular Plates with Temperature-Dependent Properties

机译：具有温度相关特性的FGM圆板的非线性弯曲
- 作者：Liansheng MA; Chunzhi DENG; Zhiying OU
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- Functionally graded material (FGM);
- nonlinear bending;
- circular plate;
- temperature- dependence;
- shooting method;
28.Study on the ablation resistance of carbon-based composites in reentry simulation environments

机译：再入模拟环境下碳基复合材料的耐烧蚀性能研究
- 作者：Zhang Dongmei; Duan Dengping; Chen Ji`an
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- carbon-based composites;
- thermal protection material;
- ground simulation;
- star-type AC plasma generator;
29.Research on creep constitutive model of TC11 titanium alloy based on RBFNN

机译：基于RBFNN的TC11钛合金蠕变本构模型研究
- 作者：Xianghua Peng; Yingshe Luo; Jingye Zhou; Min Yu; Tao Luo
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- RBF neural network;
- TC11 titanium alloy;
- creep constitution relationship;
- numerical simulation;
30.Impact of Rolling Conditions on Propagation of a Potential Crack

机译：轧制条件对潜在裂纹扩展的影响
- 作者：Richard Fabík; Jiri Kliber; Sergey Aksenov
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- rolling;
- FEM;
- crack propagation;
- Cockroft-Latham fracture criterion;
31.Investigation into hydromechanical deep drawing of aluminum alloy complicated components in aircraft manufacturing

机译：飞机铝合金复杂零件的液压机械拉深研究。
- 作者：Lihui Lang; Tao Li; Dongyang An; Ling Wang; Cailou Chi
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- Hydromechanical deep drawing;
- aluminum;
- pressure;
- simulation;
32.Heat Production Numerical Simulation and Heat-force couple Analysis of FSW pin

机译：FSW销的产热数值模拟和热力耦合分析
- 作者：Xue chunxia; Li zhiyong; Dong qiang
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- Friction stir welding;
- Numerical modeling;
- ANSYS;
- Temperature field;
- Heat-force couple;
33.Large magnetoresistance and magnetothermal conductivity in the Ni-Mn-In ferromagnetic shape memory alloys

机译：Ni-Mn-In铁磁形状记忆合金中的大磁阻和磁导率
- 作者：X.X. Zhang; B. Zhang; S. Y. Yu; J. L. ChenZ.X. Cao; G.H. Wu
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
34.Nanostructural Modification of Surface Layer of Tool Metal-Ceramic Alloy during E-beam Irradiation

机译：电子束照射过程中工具金属陶瓷合金表面层的纳米结构改性
- 作者：V.E.Ovcharenko; Y.F.Ivanov; Baohai Yu
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
35.Measuring Elasticity Constants and Cohesion Stress for Al2O3 Electroplated-coating

机译：测量Al2O3电镀涂层的弹性常数和内聚应力
- 作者：M. F. Gong; S. R. Qiao; H. Ji; G.F. Lu; C.Y.Zhang
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- Alumina;
- Young’s modulus;
- Poisson’s ratio;
- Cohesion stress;
- Electroplating;
36.Development of computer simulation of industrial superplastic sheet forming

机译：工业超塑性板材成形计算机仿真的发展
- 作者：E.N. Chumachenko
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
37.The aging behavior of SiC/Gr/6013Al composite in T4 and T6 treatments

机译：SiC / Gr / 6013Al复合材料在T4和T6处理中的时效行为
- 作者：Guo jian; Sun Yu-feng
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- aluminum matrix composite;
- silicon carbide;
- graphite;
- aging;
38.EVALUATION ON FATIGUE CHARACTERISTICS OF ALUMINUM ALLOYS BY COMPRESSIVE RESIDUAL STRESS

机译：压缩残余应力评估铝合金的疲劳特性
- 作者：HyunBae Jeon; TaeHoon Song; SunChul Huh; WonJo Park
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- Shot peening;
- Compressive Residual Stress;
- Fatigue crack growth;
- Fatigue Strength;
- striation;
39.Environmental Degradation Behaviors of Glass/ Carbon Fiber-reinforced Polymer Composites

机译：玻璃/碳纤维增强聚合物复合材料的环境降解行为
- 作者：Sung-Youl Bae; Yun-Hae Kim; Kook-Jin Kim; Joong-Won Han; Kyung-Man Moon
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- Fiber-reinforced Polymer Composites;
- Laminates;
- Carbon fiber;
- Glass fiber;
- Epoxy;
- Glass transition temperature;
- Moisture absorption;
- Diffusion;
- Swelling;
40.Application of Physical Simulation for Developing New Steel Types

机译：物理模拟在开发新型钢中的应用
- 作者：L.P. Karjalainen; M.C. Somani; A.S. Hamada
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- Flow stress;
- static recrystallization;
- DP steels;
- TRIP steels;
- CP steels;
- TWIP steels;
- bainitic steels;
- martensitic steels;
41.THE OXIDATION BEHAVIORS OF PSZ/Ni MATERIAL SYSTEM

机译：PSZ / Ni材料体系的氧化行为
- 作者：Lu Liang; Li Mingwei
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- Oxidation;
- PSZ-Ni;
- TG;
42.Research of Favorable Conversion of Friction during Powder Compaction

机译：粉末压实过程中摩擦力良好转化的研究
- 作者：WANG De-guang; WU Yu-cheng; JIAO Ming-hua; XIE Ting; YU Jian-wei; YIN Yan-guo
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- powder;
- density;
- FE;
- property;
- compaction;
- friction;
43.Hot Forging Process Design Optimization Based on Approximate Model and FEM Simulation

机译：基于近似模型和有限元仿真的热锻工艺设计优化
- 作者：Chen Xuewen; Jung Dongwon; Sun Aixue
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- Forging;
- Approximate Model;
- Technological Parameter;
- Numerical Simulation;
- Design Optimization;
44.Study on Computer Emulation of PTFE’s Wearability Improvement by Al3+ Ion Implantation

机译：Al3 +离子注入改善PTFE耐磨性的计算机模拟研究
- 作者：Junpeng Shao; Hui Tang; Yanqin Zhang
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- Ion implantation;
- Al2O3/PTFE film;
- computer simulation;
45.Effects of quenched under high pressure on crystallization of Cu60Zr20Hf10Ti10 bulk metallic glass

机译：高压淬火对Cu60Zr20Hf10Ti10块状金属玻璃结晶的影响
- 作者：Zhi Xin Wang; Jin Bin Lu; Yan Jun Xi
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- bulk metallic glass;
- crystallization;
- high pressure;
46.Welding Process Simulation under Varying Temperatures and Constraints

机译：温度和约束变化下的焊接过程仿真
- 作者：ZENG Pan; GAO Yi; Lei Li-Ping
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- Welding process;
- Equivalent Element;
- Numerical simulation;
47.Fabrication and characterization of Multi-walled carbon nanotubes encapsulated magnetic nanoparticles

机译：多壁碳纳米管包裹的磁性纳米粒子的制备与表征
- 作者：Weixue LI; Yongfu CUI; Yuan HAO; Jianfeng DAI; Qing WANG; Zhongli WU
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- MWCNTs；Anodic Arcs；alloy-filled；magnetic properties;
48.Effects of Nickel Content and Deformation-Induced Martensitic Transformation on the Fatigue Properties of Type 304 Stainless Steel Sheets at Room and Cryogenic Temperatures

机译：镍含量和形变诱发马氏体相变对室温和低温下304型不锈钢薄板疲劳性能的影响
- 作者：Jin-Young Jang; Do-Yeal Ryoo; Soo-Chan Lee; Chung-Yun Kang
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- Austenitic Type 304 stainless steel;
- Bending fatigue;
- Tension fatigue;
- Deformation-induced martensite;
- Nickel content;
49.FEM Simulation on Warm Deep Drawing of AZ31 Sheets

机译：AZ31板材热深拉伸的有限元模拟
- 作者：Li-Mei REN; Shi-Hong ZHANG; G. Palumbo; D. Sorgente; L. Tricarico
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- Finite element simulation;
- Warm deep drawing;
- Magnesium alloy AZ31;
- Fracture;
50.Research on Distribution of Stress and Strain Field in Power Spinning Process of Parts with Transverse Rib

机译：横肋零件动力旋转过程中应力应变场分布的研究
- 作者：F. Ma; H. Yang; M. Zhan
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- Power spinning;
- Transverse inner rib;
- Stress and strain field;
- FEM;
51.Numerical simulation of basal parameters for fatigue evaluation of electromotor rotor welded structure

机译：电动机转子焊接结构疲劳评估基本参数的数值模拟。
- 作者：Zhao Zhili; Yang Jianguo; Fang Hongyuan
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
52.Research on Behavior of Slab Surface Defects in Forward Slip Zone during V-H Rolling Process

机译：V-H轧制过程中前滑区板坯表面缺陷行为的研究
- 作者：Hai-liang Yu; Xiang-hua LIU; Chang-sheng LI; Li-qing CHEN
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- Forward slip;
- crack;
- FEM;
53.The multi-scale FEM simulation of wire fracture during drawing of perlitic steel

机译：珍珠岩拉伸过程中钢丝断裂的多尺度有限元模拟
- 作者：Andriy Milenin; Zbigniew Muskalski; Piotr Kustra
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
54.Application Research on Expert System of Incremental In-plane Bending

机译：面内增量弯曲专家系统的应用研究
- 作者：Tang Wenting; Tang Chaoli; Huang Lei; Yang He
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- incremental in-plane bending;
- expert system;
- database;
- Visual Basic;
- Matlab;
55.Research on influence of mandril on cross section distortion in bending process of thin-walled rectangular wave-guide tube

机译：芯棒对矩形薄壁矩形管弯曲过程中截面变形的影响研究
- 作者：Y.L.Liu; G.Y.Zhao; C.H.Lu; H.Yang
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- Mandril;
- Thin-walled rectangular wave-guide tube;
- Bending process;
- Cross section distortion;
- FEM analysis;
56.Numerical Study on Mold Filling Process of Casting

机译：铸件充型过程的数值研究
- 作者：Xiao-qiang PAN; Yu-ling ZHU
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- Mold Filling;
- Numerical Simulation;
- CFD;
- NHT;
- Interfacial Tracking;
57.An Abrasive Wear Model of Interpenetrating Composites

机译：互穿复合材料的磨料磨损模型
- 作者：Hong-yan WANG;Shou-ren WANG;Chi Qing;WANG Min
- 会议名称：《》 | 2007年
- Interpenetrating composites;
- Porous materials;
- Wear;
- Model;
58.Study on Temperature Distribution of Plasma Surface Alloying Furnace

机译：等离子表面合金炉的温度分布研究
- 作者：Zhonghou LI; Shasha LIU; Zhiyong CHENG
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- structure of charging basket;
- radiation heat transfer;
- maths model;
- temperature distribution;
59.Numerical simulation of three dimension stress field in double-sided double arc multipass welding process

机译：双面双电弧多道次焊接过程中三维应力场的数值模拟
- 作者：ZHANG Huajun; ZHANG Guangjun; Hongming GAO; Lin Wu
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- DSAW;
- Multipass welding;
- Interpass stress;
- 3D stress field;
- Numerical simulation;
60.The Effect of Catalytic Heterogeneous Recombination in the Design of Space Vehicles

机译：催化异质复合在航天器设计中的作用
- 作者：Valery L. Kovalev
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
61.Boron Ion Implantation into Polymer Films:Resistivity model for electronic device applications

机译：硼离子注入聚合物薄膜：电子设备应用的电阻率模型
- 作者：H. L. A. Pimentel; L. C. Kretly
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
62.Investigation of Concrete Properties Using Composite Material Rules

机译：使用复合材料规则研究混凝土性能
- 作者：Ilker Bekir Topcu; Res. Assist. Abdullah Demir
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- Concrete;
- E-modulus;
- Composite model;
- Crushed tile;
- Crushed autoclaved aerated concrete;
63.Research on closed die forging process of car steering knuckle

机译：汽车转向节闭模锻造工艺研究
- 作者：Deying Zhao; Liandong Zhang; Huixue Sun
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- steering knuckle;
- closed die forging;
- numerical simulation;
- FEM;
- pre-forging part;
64.A new optimization algorithm for inverse analysis to material parameters

机译：一种新的材料参数反分析优化算法
- 作者：Yinghui LU; Shuilin WANG; Hao JIANG; Xiurun Ge
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- global optimization;
- inverse analysis;
- material parameters;
- non-linear;
65.Monte-Carlo Simulation of Isotropic and Anisotropic Grain Growth in Liquid Phase Sintered Ceramics

机译：液相烧结陶瓷各向同性和各向异性晶粒长大的蒙特卡罗模拟
- 作者：Yuhong Zhao; Yue Zhang; Hua Hou; Dahai Zhang
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- Monte-Carlo Method;
- ceramic;
- isotropic and anisotropic grain growth;
- liquid phase sintering;
66.Fabrication and characterization of K-H co-doped p-ZnO thin films

机译：K-H共掺杂p-ZnO薄膜的制备与表征
- 作者：Wu Jun; Yang Yintang
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- zinc oxide;
- p type;
- doping;
- potassium;
- RF magnetron sputtering;
67.Material Constants of Ferritic Spheroidal Cast Iron during Hot Deformation

机译：铁素体球铁铸铁热变形时的材料常数
- 作者：Xin ZHAO; Tianfu JING
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- Spheroidal cast iron;
- Hot working;
- Flow stress;
- Activation energy;
68.Microstructure Simulation of Die Casting Magnesium Alloy

机译：压铸镁合金的组织模拟
- 作者：Fu Zhennan; XIONG Shoumei
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- High Pressure Die Casting;
- Magnesium Alloy;
- Microstructure Simulation;
- Cellular Automaton Model;
69.Numerical Simulation of Thermal Induced Crack Propagation in Laminated Composites

机译：层状复合材料热致裂纹扩展的数值模拟
- 作者：Tao XU; Juying Yang; Chun-an TANG; Shibin TANG
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- Thermal stress;
- Laminated composites;
- Cracking propagation;
- Coefficient of thermal expansion;
70.Experimental study of GFRP-strengthened bridge RC beams subjected to fatigue loading

机译：GFRP加固桥梁RC梁疲劳试验研究。
- 作者：Liyuan SHI; Pingqi XIA; Liping SHI
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- reinforced concrete beams;
- GFRP;
- strengthening;
- fatigue behaviors;
- experimental study;
71.Numerical Simulation of Diecasting Mold Filling Process by the Uniform/non-uniform Complex FDM Mesh Technology

机译：均匀/非均匀复杂FDM网格技术压铸模具充型过程的数值模拟
- 作者：Jianxin ZHOU; Liliang CHEN; Ruixiang LIU
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- Uniform/non-uniform complex FDM mesh technology;
- mold filling process;
- diecasting;
- numerical simulation;
72.Preparation and Mechanical Properties of New Types Unsaturated Poly (ester-imide) Resin Composites

机译：新型不饱和聚（酯酰亚胺）树脂复合材料的制备及力学性能
- 作者：Jian Lv; Jin-biao ZHONG; Jin-hong YU; Shao-rong LU; Chun WEI
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- bis-(carboxyphthalimide) s;
- unsaturated polyester;
- hybrid composites;
- mechanical properties;
- microstructure;
73.A Method of Bulge Test for Determining the Work Hardening Characteristics of Sheet Metals

机译：确定钣金件加工硬化特性的膨胀试验方法
- 作者：Guangfan Gao; Xingwei Ding
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- bulge test;
- strain hardening characteristics;
- finite element method;
- springback;
- 316L austenite stainless steel;
74.DIFFUSION INTERACTION BETWEEN TWO METALS,ONE OF WHICH IS IN LIQUID STATE

机译：处于液态的两种金属之间的扩散相互作用
- 作者：A.P. Savitskii
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
75.Dynamics simulation of Cu coating SiC composite particles

机译：Cu涂层SiC复合颗粒的动力学模拟
- 作者：Ruiyu Liu; Bingbing Fan; Shixun Zhang; Shoushan Li; Kai Li; Rui Zhang
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- SiC/Cu;
- coating;
- grain growth;
- dynamic simulation;
76.A Study on the Growth Kinetics of CeO2-modified Aluminide Coating and its Computer Fitting

机译：CeO2改性铝化物涂层的生长动力学及其计算机拟合的研究
- 作者：Jiu-ba WEN; Liu-Song YANG; Li-Min ZHU; Jin-Min ZHANG; Quan-An LI
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- Pack cementation；electro-deposition；CeO2-modified；computer fitting；growth kinetics;
77.Numerical Simulation of Temperature Distribution in Conductive Asphalt Solar Collector due to Pavement Material Parameters

机译：路面材料参数对导电沥青太阳能集热器温度分布的数值模拟
- 作者：Shaopeng WU; Bo LI; Hong WANG; Jian QIU
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- Conductive;
- Asphalt solar collector;
- Temperature Prediction;
- Finite Element Model;
78.Valence band mixing effect on R-plane GaN/AlGaN quantum wells

机译：价带混合对R面GaN / AlGaN量子阱的影响
- 作者：K.K. Wu; K.F. Yarn; W.J. Luo; C.N. Chen
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- R-plane;
- optical anisotropy;
- valence band mixing;
- optical matrix element;
79.Research on the accurate control of initial and finishing cooling temperatures for X70 pipeline steels

机译：X70管线钢初，终冷却温度的精确控制研究
- 作者：Tao Niu; Hao Yu; Yonglin Kang; Mingjian Long
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- Pipeline Steels;
- Initial Cooling Temperature;
- Finishing Cooling Temperature;
- Acicular Ferrite;
- Pre-eutectoid Ferrite;
80.Simulation of Hydroformed High Strength Steel Chassis Parts

机译：液压成形高强度钢底盘零件的仿真
- 作者：Kee Joo Kim; Joo-Sung Kim; Byung-Ik Choi; Keun-Hwan Kim; Yeon Sik Kang; Chang Won Sung; Si-Tae Won
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- hydroforming;
- chassis;
- simulation;
- bending;
- thinning;
- CAE;
81.The Dynamic and Static recrystallization of Low-carbon Microalloyed Pipeline Steels

机译：低碳微合金管线钢的动态和静态再结晶
- 作者：Guiying QIAO; Furen XIAO; Bo LIAO; Chunling ZHANG; Yiyin SHAN; Ke YANG
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- Pipeline steels;
- dynamic recrystallization;
- static recrystallization;
- PTT diagrams;
82.Numerical Simulation of Wire-rod Hot Continuous Rolling Process with Multi-field Coupling

机译：多场耦合的线材热连轧过程的数值模拟
- 作者：Licheng YANG
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- Temperature field;
- thermo-mechanical coupling;
- hot continuous rolling;
- 3-D numerical simulation.;
83.Key technologies for 3D-FE modeling of radial-axial ring rolling process

机译：径向-轴向环轧工艺的3D-FE建模关键技术
- 作者：L.G. Guo; H. Yang
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- Radial-axial ring rolling;
- 3D-FE modeling and simulation;
- dynamic explicit procedure;
84.Elevated temperature compressive strength and deformation behavior of a ZrCP reinforced tungsten-matrix composite

机译：ZrCP增强钨基复合材料的高温抗压强度和变形行为
- 作者：Yujin Wang; Taiquan Zhang; Yu Zhou; Tingquan Lei; Guiming Song
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- 30vol.%ZrCp/W composite;
- Compressive deformation;
- Dynamic recovery and recrystallization;
- Pseudo-plasticity;
85.Gate Location Optimization in Injection Molding Based on Empirical Search Method

机译：基于经验搜索的注塑成型浇口位置优化
- 作者：Xiao-Yan Huang; De-Qun Li; Lei Chen
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- Gate Location;
- Empirical search method;
- Empirical library;
- Mathematics modeling;
- Numerical example;
86.COMPARISON OF MICROSTRUCTURAL ASPECTS BY ELECTRON MICROSCOPY OBSERVED IN Al-Mg BASED ALLOYS OBTAINED BY CONVENTIONAL AND P/M PROCESSES AFTER THERMOMECHANICAL TREATMENTS

机译：热力学处理后常规和P / M工艺获得的Al-Mg基合金的电子显微镜观察到的微观结构比较
- 作者：W. A. MONTEIRO; S. J. BUSO; A. ALMEIDA FILHO; R. B. FERRARI
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
87.Research on heat treatment techniques and structure properties of CuNi2TiCrZr Alloy

机译：CuNi2TiCrZr合金的热处理工艺和组织性能研究
- 作者：XU Yu-song; WANG Xiao-lian
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- copper alloy;
- high strength;
- conductive materials;
- technique;
- microstructure;
- properties;
88.Modeling the Electric Field Distribution on Insulator under Electron Bombardment in Vacuum

机译：真空中电子轰击的绝缘子电场分布建模
- 作者：A.G.E. Sutjipto; R. Muhida; Afzeri
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
89.Evaluation of Sulfide Stress Corrosion Cracking and Electro-chemical corrosion susceptibility of the ASTM A106 Gr. B steel weldments

机译：评估ASTM A106 Gr的硫化物应力腐蚀开裂和电化学腐蚀敏感性。 B钢焊件
- 作者：Gyu Young ; Lee; Kwang Jin; Park; Dong Ho; Bae
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- Sulfide Stress Corrosion Cracking(SSCC);
- Electro-chemical corrosion susceptibility;
- ASTM A106 Gr. B;
- Weldments;
- HAZ;
- Corrosion rate;
90.Investigation of melt-remove dynamics in processes of the gas - jet assisted laser fusion cutting

机译：气体辅助激光熔融切割过程中熔体去除动力学的研究。
- 作者：V.S. Golubev; V.D. Dubrov; Yu.N. Zavalov; R.V. Grishaev; N.G. Dubrovin
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
91.The Theoretical and Experimental Analysis of Thermal Circulation During Laser Surface Strengthening

机译：激光表面强化过程中热循环的理论和实验分析
- 作者：Jianyu ZHANG; Lingli CUI; Lixin GAO; Huigang WANG; Jiuxia YANG
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- Laser strengthening;
- Thermal circulation;
- Temperature distribution;
92.GTAW–Deposition of INCONEL 625 on Steel: Processing and Characterization

机译：GTAW –钢中INCONEL 625的沉积：加工和表征
- 作者：M. Jamshidinia; A. Abdollah-zadeh; T. Saeid; F. Malek
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
93.Reliability Calculation of Welded Pressure Pipe with Circumferential Crack Based on 3-D Elastic-Plastic SFEM

机译：基于3-D弹塑性SFEM的周向缝焊压力管道的可靠性计算
- 作者：Bolin He; Yingxia Yu; Lixing Huo; Yufeng Zhang
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- welded pipe;
- circumferential surface crack;
- stochastic finite element method;
- reliability;
- safety assessment;
94.Application of Semantic Approaches and Interactive Virtual Technology to Improve Teaching Effectiveness

机译：语义方法和交互式虚拟技术的应用提高教学效果
- 作者：Chi-Chia Liu; Hsu-Hsun Yao; Kuo-Wei Lee; Min Jou
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- CAD;
- computer simulation;
- virtual technology;
- manufacturing;
- information theory;
95.Effect of Friction Stir Welding Parameters on the Microstructures and Mechanical Properties of 304 Stainless Steels

机译：搅拌摩擦焊接参数对304不锈钢组织和力学性能的影响
- 作者：M. Jafarzadegan; T. Saeid; A. Abdollah-zadeh
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
96.Study on characteristic of material removal rate in chemical mechanical polishing of silicon wafer

机译：硅片化学机械抛光中材料去除率的特性研究
- 作者：Jianxiu SU; Xiqu CHEN; Xueliang ZHANG; Jiaxi DU; Dongming GUO
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- Chemical mechanical polishing;
- material removal mechanism;
- material removal rate;
- abrasive abrasion;
- interaction;
97.Mold Filling Process Modeling with Multi-Relaxation-Time Lattice Boltzmann Method

机译：多松弛时间格子Boltzmann方法的模具填充过程建模
- 作者：Jianglin HUANG; Liliang CHEN; Jianxin ZHOU
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- lattice Boltzmann method;
- MRT;
- filling processes;
- casting;
- free surface flow;
98.EFFECTS OF GAS MULTICOMPONENT THERMOCHEMICAL TREATMENT PROCESS ON STRUCTURE ANDE PROPERTIES OF STEEL 20

机译：气体多组分热化学处理工艺对20号钢组织和性能的影响
- 作者：Zhou Hai; Chen Fei; Yang Yingge; Wan Hancheng; Chen Jiaqing; Yao Bin; Xi Ming
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
99.A Study on Fracture Properties of Multiphase Microstructures of 42CrMo4 Steel

机译：42CrMo4钢多相组织的断裂性能研究。
- 作者：A. Salemi; A. Abdollah-zadeh; M. Mirzaei; H. Assadi
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年
- 42CrMo4 steel;
- Ferrite-Bainite-Martensite;
- Plain Strain Fracture Toughness;
- Cleavage Fracture;
100.MACROKINETICS HIERARCHIES OF STATES AT DYNAMIC SUPERPLASTICITY

机译：动态超塑性状态下的宏观动力学层次
- 作者：D.A.Kitaeva; Ya.I.Rudaev
- 会议名称：《The 5th International Conference on Physical and Numerical Simulation of Materials Processing: Abstracts & Program》 | 2007年