...
首页> 外文期刊>Waste Management >Kinetic model of the thermal pyrolysis of chrome tanned leather treated with NaOH under different conditions using thermogravimetric analysis
【24h】

Kinetic model of the thermal pyrolysis of chrome tanned leather treated with NaOH under different conditions using thermogravimetric analysis

机译:热重分析在不同条件下用NaOH处理的铬鞣革热裂解的动力学模型

获取原文
获取原文并翻译 | 示例
           

摘要

The thermal decomposition of chrome tanned leather before and after a soaking treatment with NaOH was studied using thermogravimetric analysis (TGA). The effect of the solution concentration (0.2 M and 0.5 M) and the soaking time (5 min and 15 min) was evaluated. TGA experiments at four heating rates (5, 10, 15 and 20℃min~(-1)) were run in a nitrogen atmosphere for every treatment condition. A kinetic model was developed considering the effect of the three variables studied, i.e.: the NaOH solution concentration, the soaking time and the heating rate. The proposed model for chrome tanned leather pyrolysis involves a set of four reactions, i.e.: three independent nth order reactions, yielding the corresponding products and one of them undergoing a successive cero order reaction. The model was successfully applied simultaneously to all the experimental data obtained. The evaluation of the kinetic parameters obtained (activation energy, pre-exponential factor and reaction order) allowed a better understanding of the effect of the alkali treatment on these wastes.
机译:使用热重分析(TGA)研究了用NaOH浸泡处理前后的鞣制铬鞣革的热分解。评估了溶液浓度(0.2 M和0.5 M)和浸泡时间(5分钟和15分钟)的影响。在每种处理条件下,在氮气气氛中进行四种加热速率(5、10、15和20℃min〜(-1))的TGA实验。考虑到所研究的三个变量的影响,开发了动力学模型,即:NaOH溶液浓度,浸泡时间和加热速率。提出的用于鞣制铬鞣革热解的模型涉及一组四个反应,即:三个独立的n阶反应,产生相应的产物,其中一个经历连续的色阶反应。该模型已成功地同时应用于获得的所有实验数据。评估所获得的动力学参数(活化能,指数前因子和反应顺序)可以更好地了解碱处理对这些废物的影响。

著录项

  • 来源
    《Waste Management》 |2016年第2期|285-299|共15页
  • 作者单位

    Spanish Footwear Technology Institute (INESCOP), Poligono Industrial Campo Alto, P.O. Box 253, E-03600 Elda, Spain;

    Department of Chemical Engineering, University of Alicante, P.O. Box 99, E-03080 Alicante, Spain;

    Department of Chemical Engineering, University of Alicante, P.O. Box 99, E-03080 Alicante, Spain;

    Spanish Footwear Technology Institute (INESCOP), Poligono Industrial Campo Alto, P.O. Box 253, E-03600 Elda, Spain;

    Department of Chemical Engineering, University of Alicante, P.O. Box 99, E-03080 Alicante, Spain;

  • 收录信息
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

    Leather; Kinetics; Modelling; Pyrolysis; Thermal decomposition; Alkali treatment;

    机译:皮革;动力学;造型;热解;热分解;碱处理;

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号