...
首页> 外文期刊>Nuclear fusion >Low cycle fatigue properties of reduced activation ferritic/martensitic steels after high-dose neutron irradiation
【24h】

Low cycle fatigue properties of reduced activation ferritic/martensitic steels after high-dose neutron irradiation

机译:大剂量中子辐照后还原活化铁素体/马氏体钢的低周疲劳性能

获取原文
获取原文并翻译 | 示例
           

摘要

This paper focuses on the low cycle fatigue (LCF) behaviour of reduced activation ferritic/martensitic steels irradiated to a displacement damage dose of up to 70 dpa at 330-337℃ in the BOR 60 reactor within the ARBOR 2 irradiation programme. The influence of neutron irradiation on the fatigue behaviour was determined for the as-received EUROFER97, pre-irradiation heat-treated EUROFER97 HT and F82H-mod steels. Strain-controlled push-pull loading was performed using miniaturized cylindrical specimens at a constant temperature of 330℃ with total strain ranges between 0.8% and 1.1%. Comparison of the LCF behaviour of irradiated and reference unirradiated specimens was performed for both the adequate total and inelastic strains. Neutron irradiation-induced hardening may have various effects on the fatigue behaviour of the steels. The reduction of inelastic strain in the irradiated state compared with the reference unirradiated state at common total strain amplitudes may increase fatigue lifetime. The increase in the stress at the adequate inelastic strain, by contrast, may accelerate fatigue damage accumulation. Depending on which of the two effects mentioned dominates, neutron irradiation may either extend or reduce the fatigue lifetime compared with the reference unirradiated state. The results obtained for EUROFER97 and EUROFER97 HT confirm these considerations. Most of the irradiated specimens show fatigue lifetimes comparable to those of the reference unirradiated state at adequate inelastic strains. Some irradiated specimens, however, show lifetime reduction or increase in comparison with the reference state at adequate inelastic strains.
机译:本文重点研究了还原活化铁素体/马氏体钢在BORBOR 2辐照程序中在BOR 60反应器中于330-337℃辐照至高达70 dpa的位移损伤剂量时的低循环疲劳(LCF)行为。确定了中子辐照对疲劳性能的影响,适用于已收到的EUROFER97,预辐照热处理的EUROFER97 HT和F82H-mod钢。应变控制的推拉加载是在330℃的恒定温度下使用小型圆柱形试样进行的,总应变范围在0.8%至1.1%之间。对于适当的总应变和非弹性应变,对辐照和参考未辐照样品的LCF行为进行了比较。中子辐照引起的硬化可能对钢的疲劳行为有多种影响。在共同的总应变幅度下,与参考未辐照状态相比,辐照状态下的非弹性应变降低可以延长疲劳寿命。相反,在适当的非弹性应变下应力的增加会加速疲劳损伤的积累。取决于所提及的两种效应中的哪一种,与参考未辐照状态相比,中子辐照可能会延长或缩短疲劳寿命。 EUROFER97和EUROFER97 HT的结果证实了这些考虑。在适当的非弹性应变下,大多数受辐照样品的疲劳寿命可与参考未辐照状态的疲劳寿命相媲美。但是,在适当的非弹性应变下,与参考状态相比,某些辐照样品显示出寿命缩短或增加。

著录项

  • 来源
    《Nuclear fusion》 |2011年第8期|p.13.1-13.6|共6页
  • 作者单位

    Karlsruher Institut fuer Technologie, Institut fur Angewandte Materialien,Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany;

    Karlsruher Institut fuer Technologie, Institut fur Angewandte Materialien,Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany;

    Karlsruher Institut fuer Technologie, Institut fur Angewandte Materialien,Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen, Germany;

    Joint Stock Company 'SSC RIAR', 433510, Dimitrovgrad, Russian Federation;

    Joint Stock Company 'SSC RIAR', 433510, Dimitrovgrad, Russian Federation;

    Fusion for Energy, Josep Pla, 2, Torres Diagonal Literal B3, 08019 Barcelona, Spain;

    Fusion for Energy, Josep Pla, 2, Torres Diagonal Literal B3, 08019 Barcelona, Spain;

  • 收录信息 美国《科学引文索引》(SCI);美国《工程索引》(EI);美国《生物学医学文摘》(MEDLINE);
  • 原文格式 PDF
  • 正文语种 eng
  • 中图分类
  • 关键词

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号