首页> 美国卫生研究院文献>Medical Physics >Combining registration and active shape models for the automatic segmentation of the lymph node regions in head and neck CT images
【2h】

Combining registration and active shape models for the automatic segmentation of the lymph node regions in head and neck CT images

机译:结合套准模型和主动形状模型以自动分割头颈部CT图像中的淋巴结区域

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

>Purpose: Intensity-modulated radiation therapy (IMRT) is the state of the art technique for head and neck cancer treatment. It requires precise delineation of the target to be treated and structures to be spared, which is currently done manually. The process is a time-consuming task of which the delineation of lymph node regions is often the longest step. Atlas-based delineation has been proposed as an alternative, but, in the authors’ experience, this approach is not accurate enough for routine clinical use. Here, the authors improve atlas-based segmentation results obtained for level II–IV lymph node regions using an active shape model (ASM) approach.>Methods: An average image volume was first created from a set of head and neck patient images with minimally enlarged nodes. The average image volume was then registered using affine, global, and local nonrigid transformations to the other volumes to establish a correspondence between surface points in the atlas and surface points in each of the other volumes. Once the correspondence was established, the ASMs were created for each node level. The models were then used to first constrain the results obtained with an atlas-based approach and then to iteratively refine the solution.>Results: The method was evaluated through a leave-one-out experiment. The ASM- and atlas-based segmentations were compared to manual delineations via the Dice similarity coefficient (DSC) for volume overlap and the Euclidean distance between manual and automatic 3D surfaces. The mean DSC value obtained with the ASM-based approach is 10.7% higher than with the atlas-based approach; the mean and median surface errors were decreased by 13.6% and 12.0%, respectively.>Conclusions: The ASM approach is effective in reducing segmentation errors in areas of low CT contrast where purely atlas-based methods are challenged. Statistical analysis shows that the improvements brought by this approach are significant.
机译:>目的:调强放射疗法(IMRT)是用于治疗头颈癌的最新技术。它需要精确地描述要治疗的目标和要保留的结构,这目前是手动完成的。该过程是一项耗时的任务,其中划定淋巴结区域通常是最长的步骤。已经提出了基于Atlas的轮廓作为替代方案,但是根据作者的经验,这种方法对于常规临床使用而言不够准确。在这里,作者使用主动形状模型(ASM)方法改善了针对II–IV级淋巴结区域获得的基于图集的分割结果。>方法:首先从一组头部中创建平均图像量和颈部的患者图像,其淋巴结最小。然后,使用仿射,全局和局部非刚性变换将平均图像体积配准到其他体积,以建立图集中的表面点与其他每个体积中的表面点之间的对应关系。建立对应关系后,将为每个节点级别创建ASM。然后使用这些模型首先约束基于图集的方法所获得的结果,然后迭代地完善解决方案。>结果:该方法是通过一次留一法的实验进行评估的。通过Dice相似系数(DSC),将基于ASM和地图集的分割与手动轮廓进行了比较,以实现体积重叠以及手动和自动3D曲面之间的欧几里得距离。基于ASM的方法获得的平均DSC值比基于Atlas的方法高10.7%;平均和中值表面误差分别降低了13.6%和12.0%。>结论: ASM方法可有效降低在CT对比度低的区域(纯粹基于图集的方法受到挑战)中的分割误差。统计分析表明,此方法带来的改进意义重大。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号