首页> 中文期刊> 《中南大学学报(自然科学版)》 >轴对称件三点渐进成形理论和实验研究

轴对称件三点渐进成形理论和实验研究

         

摘要

针对单点渐进成形精度不高的问题,从控制变形角度,提出一种围绕对顶主成形头设置对顶辅助工具头以缩小变形域、限制二次变形和回弹、有效提高成形精度的三点渐进成形新工艺。为了寻找加工过程中塑性应变的变化规律以指导加工路径规划和成形工艺参数设计,基于轴对称件三点成形等高线加工轨迹的特点,提出并建立等效加工层模型。利用力学方程和平面应变条件,求得加工层的等效虚拟应力应变。研究结果表明:轴对称圆盘件成形的数值仿真和实验结果与理论解相一致,所建等效模型及理论分析的有效性和所提三点渐进成形控制变形及提高精度具有可行性。%To improve the accuracy of single point incremental forming (SPIF), a new process called three opposite point incremental forming (TOPIF) with the main opposite forming tools and auxiliary opposite tools was presented. In this process, the auxiliary opposite tools located on the back and side of the main tools in the formed region were used to reduce the deformation area and restrict the secondary harmful deformation and springback. To obtain the rule of the plastic strain to guide the planning of tool path and the design of process parameters during forming, the equivalent model with contour layered was established based on the contour trajectory for the axisymmetric three-point forming. The equivalent virtual stress and strain were resolved by using the plane strain and mechanics equations. Taking the disk part as an example, the numerical simulation and experiment results show that the presented new process is practical for the disk part in TOPIF.

著录项

  • 来源
    《中南大学学报(自然科学版)》 |2015年第5期|1641-1647|共7页
  • 作者单位

    浙江工业大学特种装备制造与先进加工技术教育部&浙江省重点实验室;

    浙江杭州;

    310014;

    浙江工业大学特种装备制造与先进加工技术教育部&浙江省重点实验室;

    浙江杭州;

    310014;

    杭州师范大学钱江学院;

    浙江杭州;

    310036;

    浙江工业大学特种装备制造与先进加工技术教育部&浙江省重点实验室;

    浙江杭州;

    310014;

    浙江工业大学特种装备制造与先进加工技术教育部&浙江省重点实验室;

    浙江杭州;

    310014;

    浙江工业大学特种装备制造与先进加工技术教育部&浙江省重点实验室;

    浙江杭州;

    310014;

  • 原文格式 PDF
  • 正文语种 chi
  • 中图分类 冷冲压工艺;
  • 关键词

    三点成形; 等效模型; 局部变形; 成形精度;

相似文献

  • 中文文献
  • 外文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号