[目的]对船舶舱室噪声阻尼控制进行布置优化研究,以提高阻尼减振降噪效果和降低阻尼重量.[方法]首先,基于SEA理论,对声腔子系统的A计权声压级关于子系统阻尼损耗因子的一阶灵敏度进行理论推导与数值分析.同时,提出阻尼材料的布置数学优化模型并设计优化程序,运用MATLAB对VA One进行二次开发,建立舱室噪声阻尼控制布置优化系统.然后,在此基础上,将阻尼敷设分为5个区域,每个区域的阻尼厚度比为优化变量,以阻尼涂层的总重量为目标函数,以目标舱室的A计权声压级为约束条件,建立实船SEA优化模型并进行布置优化数值研究.[结果]研究结果表明,通过优化程序计算可以得到各区域阻尼敷设的最佳厚度,优化后的阻尼重量可减轻60.4%,有效提高了单位重量阻尼的降噪效果.[结论]该研究成功解决了舱室阻尼降噪的阻尼敷设位置和厚度的选择难题,为阻尼的声学设计提供了可靠的分析方法和指导.%An optimization analysis study concerning the damping control of ship's cabin noise was carried out in order to improve the effect and reduce the weight of damping. Based on the Statistical Energy Analysis (SEA) method, a theoretical deduction and numerical analysis of the first-order sensitivity analysis of the A-weighted sound pressure level concerning the damping loss factor of the subsystem were carried out. On this basis, a mathematical optimization model was proposed and an optimization program developed. Next, the secondary development of VA One software was implemented through the use of MATLAB, while the cabin noise damping control layout optimization system was established. Finally, the optimization model of the ship was constructed and numerical experiments of damping control optimization conducted. The damping installation region was divided into five parts with different damping thicknesses. The total weight of damping was set as an objective function and the A-weighted sound pressure level of the target cabin was set as a constraint condition. The best damping thickness was obtained through the optimization program, and the total damping weight was reduced by 60.4%. The results show that the damping noise reduction effect of unit weight is significantly improved through the optimization method. This research successfully solves the installation position and thickness selection problems in the acoustic design of damping control, providing a reliable analysis method and guidance for the design.
展开▼
