首页> 外文会议>International symposium on advanced optical manufacturing and testing technologies >Analysis of offset error for segmented micro-structure optical element based on optical diffraction theory
【24h】

Analysis of offset error for segmented micro-structure optical element based on optical diffraction theory

机译:基于光衍射理论的分段微结构光学元件偏移误差分析

获取原文

摘要

Micro-structure optical elements are gradually applied in modern optical system due to their characters such as light weight, replicating easily, high diffraction efficiency and many design variables. Fresnel lens is a typical micro-structure optical element. So in this paper we take Fresnel lens as base of research. Analytic solution to the Point Spread Function (PSF) of the segmented Fresnel lens is derived based on the theory of optical diffraction, and the mathematical simulation model is established. Then we take segmented Fresnel lens with 5 pieces of sub-mirror as an example. In order to analyze the influence of different offset errors on the system's far-field image quality, we obtain the analytic solution to PSF of the system under the condition of different offset errors by using Fourier-transform. The result shows the translation error along XYZ axis and tilt error around XY axis will introduce phase errors which affect the imaging quality of system. The translation errors along XYZ axis constitute linear relationship with corresponding phase errors and the tilt errors around XY axis constitute trigonometric function relationship with corresponding phase errors. In addition, the standard deviations of translation errors along XY axis constitute quadratic nonlinear relationship with system's Strehl ratio. Finally, the tolerances of different offset errors are obtained according to Strehl Criteria.
机译:由于它们的角色如重量轻,容易,高衍射效率和许多设计变量,微​​结构光学元件逐渐施加在现代光学系统中。菲涅耳透镜是典型的微结构光学元件。所以在本文中,我们将菲涅耳透镜作为研究基础。基于光学衍射理论导出分段菲涅耳透镜的点扩散功能(PSF)的分析解决方案,并建立了数学仿真模型。然后我们将分段的菲涅耳透镜用5件镜像作为示例。为了分析不同偏移误差对系统的远场图像质量的影响,我们通过使用傅立叶变换在不同偏移误差的条件下获得系统的PSF的分析解决方案。结果显示沿XYZ轴的转换误差和XY轴周围的倾斜误差会引入影响系统成像质量的相位误差。沿XYZ轴的翻译误差构成与相位误差的线性关系,XY轴周围的倾斜误差构成了与相应的相位误差的三角函数关系。此外,翻译误差沿XY轴的标准偏差构成与系统的斯特勒比比的二次非线性关系。最后,根据刻痕标准获得不同偏移误差的公差。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号