首页> 外文会议>Proceedings '96 China-Japan symjposium on particuology >THE HEAT TRANSFER PERFORMANCE OF A GAS-SOLID CONTACTOR WITH REGULARLY ARRANGED BAFFLE PLATES
【24h】

THE HEAT TRANSFER PERFORMANCE OF A GAS-SOLID CONTACTOR WITH REGULARLY ARRANGED BAFFLE PLATES

机译:具有规则排列的挡板的气固接触器的传热性能

获取原文

摘要

The heat transfer coefficients between gas and solid particles in a countercurrent olid contactor with regularly arranged baffle plates have been obtained by temperature profiles and solving the heat balance equations in consideration of heat loss. The loading point was observed at a critical gas flow rate, G_(ld) , in this contactor and a definite increase in the solid holdup was also observed at Gu_(ld).The heat transfer coefficient between gas and particles, h, increased under G_(ld) and decreased over G_(ld) , but the volumetric heat transfer coefficients, ha_p , increased definitely due to the increase of solid holdup, where a_p is the volumetric specific surface area of particles.
机译:通过温度分布图并考虑热损失来求解热平衡方程,可以得出带有规则排列的挡板的逆流olid接触器中气体与固体颗粒之间的传热系数。在该接触器中,在临界气体流量G_(ld)处观察到了加载点,并且在Gu_(ld)处也观察到了固含量的确定增加。 G_(ld)相对于G_(ld)有所降低,但由于固体固持力的增加,体积传热系数ha_p肯定增加,其中a_p是颗粒的体积比表面积。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
获取原文

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号