您现在的位置: 首页> 研究主题> 交换结构

交换结构

交换结构的相关文献在1982年到2022年内共计603篇,主要集中在自动化技术、计算机技术、无线电电子学、电信技术、社会科学丛书、文集、连续性出版物 等领域,其中期刊论文204篇、会议论文14篇、专利文献1826995篇;相关期刊122种,包括信息工程大学学报、电子学报、电子与电脑等; 相关会议13种,包括2011年全国生命系统建模仿真学术年会、先进制造技术与工业信息学博士生学术论坛、2007中国西部青年通信学术会议等;交换结构的相关文献由1055位作者贡献,包括伊鹏、扈红超、李挥等。

交换结构—发文量

期刊论文>

论文:204 占比:0.01%

会议论文>

论文:14 占比:0.00%

专利文献>

论文:1826995 占比:99.99%

总计:1827213篇

交换结构—发文趋势图

交换结构

-研究学者

  • 伊鹏
  • 扈红超
  • 李挥
  • 汪斌强
  • 申志军
  • 郭云飞
  • 兰巨龙
  • 曾庆济
  • 肖石林
  • 刘小平
  • 期刊论文
  • 会议论文
  • 专利文献

搜索

排序:

年份

    • 闫振林; 钟济; 张科; 张兵; 杨怡平
    • 摘要: 由于超大集成电路(VLSI)技术的发展,结合输入交叉队列(“CICQ”)已经成为创建高速、大容量和可扩展交换器系统的理想方案。针对在非均匀业务流量的情况下,基于队列状态信息的 CICQ 结构调度计算往往面临着计算复杂度很高的问题,文章提出了一种基于最长队列优先调度策略与最长队列预测的高效 CICQ 交换结构调度算法—LQF-LQD。该算法在输入端采取最长的队列优先调度策略,同时在输出端采用最长队列预测调度,两者配合来应对多类型调度需求。在算法实施部署方面,设计了 LQF-LQD 算法仲裁器芯片,从而满足高速、大容量交换时的计算性能需求。实验结果证明,该算法性能有效提高,在非均匀流量的网络中可以保持良好的效果。
    • 申志军; 陶东华; 高静
    • 摘要: In order to solve the problem of insufficient execution time of the algorithm in the feedback-based two-stage switch architecture, a multichannel-feedback-based two-stage switch architecture called MFTS is proposed in this paper. The status data of the middle-stage buffers can be transmitted to the input port along the two-stage crossbars. The scheduling algorithm of input port can be started in advance based on the processed data. Any input port can obtain the scheduling results of the adjacent input port by the dedicated communication link. Based on such scheduling information and the inherent characteristics of the crossbar connection pattern, the scheduling algorithm is finalized and the final ruling result is used as the final algorithm scheduling result. Compared with the existing solutions, MFTS can increase the scheduling algorithm execution time by 2 times while avoiding packet collision and packet disordering problems, which makes it possible to support larger switching scale and higher port rate.%为解决反馈型两级交换结构中算法可执行时间不足的问题,提出一种多路反馈型两级交换结构MFTS.该结构通过两级crossbar将中间缓存的状态数据反馈到输入端口,输入端口基于处理后的数据提前开始进行算法调度;通过相邻输入端口之间的通信链路使得任一输入端口都能获得邻端口的调度信息,基于该信息和crossbar连接模式的固有特性对调度算法的结果进行终裁,将终裁结果作为最终的算法调度结果.相对于现有方案,MFTS在避免数据包冲突和数据包失序问题的前提下将调度算法可执行时间提高两倍,这使其可支持更大交换规模和更高的端口速率.
    • 罗兴; 袁传有
    • 摘要: 运用马丁的适用语言学理论,遵循语言研究应介入/干预(intervene)社会进程的思想,通过观察、录音、转写,共收集了十场初始评估语料,按照马丁的交换结构系统对语料进行标注和描写,研究社区矫正初始评估话语的语类结构以及不同阶段的交换结构,旨在揭示社工话语的交换结构特征和存在的问题,为社工提供更多有效的话语选择和理想的社工话语交换结构模型,从而提高初始评估的准确性与有效性.
    • 曾光; 黄玉萍; 史陆星
    • 摘要: 交换结构的选择对交换效率影响重大,通过对单级交换和多级交换结构比较分析后,提出了一种兼容两者的缓冲交叉式交换结构,并在基于Xilinx公司Virtex-6系列FPGA上搭建交换系统,对其进行仿真实现,得出此设计在本交换系统确实可行的结论.
    • 何璐蓓; 厉俊男; 杨翔瑞; 孙志刚
    • 摘要: SDN采用转发与控制分离的架构和集中的控制管理机制,可有效满足不同网络中不同粒度的管理控制需求.当高校科研人员进行SDN的教学和创新实验时,需要一个处理过程可感且可重新编程的数据平面来支持原理展示和自主研究.然而,传统ASIC交换机的内部实现流程不透明且转发查表架构固定,软件交换机的处理性能较低,因此无法充分支持数据平面的研究.目前,通过FPGA设计可编程数据平面,为满足不同科研场景下多样化的处理需求提供了一条可行路径.但是,在基于FPGA的可重构交换机架构和设计方法方面还缺少深入研究,主要表现在难以实现基于模块细粒度的SDN处理流程重构,现有工作复用程度低,同时无法为开源的SDN数据平面设计提供技术支持.为此,提出一种基于FPGA的SDN交换平面实现结构——RESSP(FPGA-based REconfigurable SDN Switching Pipeline).RESSP将报文处理流程拆解成多个可动态加载的模块,针对交换机具体的应用场景,利用FPGA可编程特性对硬件功能模块进行增加、删除或替换,从而针对实际需求设计出相应的报文处理逻辑.此外,基于RESSP实现了一个SDN交换机的原型系统MiniSwitch.MiniSwitch验证了RESSP在教学科研实验中快速重构所需SDN数据平面的可行性和可扩展性.%SDN,which uses forwarding control separation architecture and centralized management control mechanism,can effectively meet the needs of different networks in different granularity control demand.When SDN teaching and innovation experiments are carried out by researchers in universities,a data plane is needed which can be felt and reprogrammed to support the principle demonstration and the independent research.However,the internal implementation process of traditional ASIC switch is opaque and the lookup architecture is fixed,and the processing speed of the software switch is low,so they can not fully support the research of the data plane At present,the design of programmable data plane whith FPGA provides a feasible path to meet the diverse needs of different research scenarios.Although academia and industry have been done some preliminary attempt based on FPGA SDN switch design,but FPGA-based reconstructed switch architecture and design method still lack in-depth study,and it is difficult to achieve fine-grained module reconfigurable SDN processing.Therefore,the existing work is hard to reuse and is also unable to provide technical support to SDN data graphic design.This paper proposed a FPGA-based reconfigurable SDN switching architecture,namely RESSP.RESSP disassembles the packet processing into multiple modules which can be dynamically loaded.For specific application scenarios switches,a corresponding packet processing was designed by using FPGA to add,remove or replace the RESSP's module.Based on the structure of RESSP,this paper implemented a prototype of SDN switch MiniSwitch and its management software.MiniSwitch verifies that RESSP can quickly reconstruct the corresponding SDN data plane for different scenarios,and meet the diverse processing requirements of SDN switches in different application scenarios.
    • 周延鹏; 张兴明
    • 摘要: The traditional exchange structure is complicated and time scheduling overhead problem. Using a modified round-robin scheduling algorithm, at the output buffer is set according to a certain order of output, and by verilog code to achieve the 8 * 8 CICQ switch fabric. Greatly reducing the conflict of input and output ports of traditional crossbar switch fabric, effectively avoiding HOL blocking problem . Using an algorithm complexity is O ( 1 ) of the round-robin scheduling algorithm , hardware implementation simple. It can achieve 100% throughput efficiency, to achieve the fastest speed three clock cycles low latency switching.%针对传统交换结构调度复杂且时间开销大的问题,采用交叉点缓存(Buffered Crossbar)交换结构和改进的轮询调度算法,在输出端设置按一定的缓存顺序输出,并通过verilog代码实现了8*8的CICQ交换结构.极大地缓解了传统Crossbar交换结构存在的输入输出端口冲突问题,有效避免了队头阻塞问题.采用算法复杂度为O(1)的轮询调度算法,硬件实现简单.可以达到100%的吞吐效率,实现了最快3个时钟周期的高速度低延时交换.
    • 杨同智; 周汝志
    • 摘要: 为解决航天电子系统背板内总线因采用自定义专用设计,继承性较差、内总线信号难以监控测试等弊端,对基于电信计算构架(TCA)的航天电子串行背板总线设计进行了研究.介绍了TCA总线中先进电信构架(ATCA)和微型电信构架(MTCA)的类型、分区和用途.讨论了基于TCA总线的背板总线设计:按信号分为分级数据管理总线、数据更新接口、电源分配区、时钟分配与触发、自定义信号和测试6个功能区,通过背板资源的分区规范化管理、内总线测试接口设计和基于交换策略的冗余设计,分别采用交换结构和串行背板技术设计功能区.给出了一个基于TCA设计的开放式、可扩展、可测试、适应不同码率需求的通用型可靠背板内总线构架,具可靠性高、带宽大等优点.研究表明TCA可作为航天电子背板总线设计的一种可选方案.
    • 刘晓锋
    • 摘要: 控制平面与数据平面的分离和交换节点的可编程性一直是计算机网络界追求的目标.过去对此没有足够的应用场景及需求,很多相关研究项目因此搁浅.随着以大数据和云计算为特征的现代数据中心日益盛行,以分离控制平面与数据平面为基础的软件定义网络成为研究热点.首先讨论软件定义网络背后的应用需求及分离的必要性,分离原则与软件定义网络的关联以及其本质特征与体系结构,最后给出结论及未来的研究展望.%Separation between the control and data planes,and programmable networks are the goals that network workers have been pursuing for a long time.Due to the lack of application scenarios and requirements over the past few years,many related research projects have run aground.As modern data center characterized by big data and cloud computing is becoming more prevalent,Software Defined Networking (SDN) based on separation between the control and data planes has attracted increasing attention.In this paper,application requirements and separation necessity behind SDN are talked about first.And then,the correlation between SDN and separation-law is analyzed,and the architecture and essence of SDN are deeply discussed.Finally,a conclusion is given and future trend of research on SDN is forecasted.
    • 郑振; 乔庐峰; 陈庆华; 邵世雷; 张俊俊
    • 摘要: 针对星载设备对体积、硬件资源消耗等严格限制的情况,为提高IP交换机的吞吐性能,同时尽可能地降低硬件开销与时延等,设计了一种用于星载IP交换机中的三级Clos交换结构.该结构可支持多个优先级,并采用变长分组调度机制,能够直接处理IP分组.该结构还对原有的三级Clos结构进行改进,将中间级部分整合为一个模块完成,便于在中间级实行集中调度,从而避免了在输出级模块中形成阻塞,同时简化了交换结构的实现过程,降低了硬件资源耗费.使用Xilinx xc5vlx330tFPGA实现了完整的16 ×16的八优先级变长调度交换结构,其峰值吞吐率可达16 Gb/s.综合结果显示,整个交换结构占用slice register 80352个、block RAM 252块,满足星载交换机的设计需求.
  • 查看更多

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号