超声波加工
超声波加工的相关文献在1989年到2023年内共计385篇,主要集中在金属学与金属工艺、化学工业、一般工业技术
等领域,其中期刊论文108篇、会议论文12篇、专利文献864534篇;相关期刊65种,包括大连理工大学学报、新技术新工艺、金刚石与磨料磨具工程等;
相关会议10种,包括2007年中国机械工程学会年会、第九届全国振动理论及应用学术会议暨中国振动工程学会成立20周年庆祝大会、2005年中国机械工程学会年会等;超声波加工的相关文献由432位作者贡献,包括李伟秋、颜炳姜、赵显华等。
超声波加工—发文量
专利文献>
论文:864534篇
占比:99.99%
总计:864654篇
超声波加工
-研究学者
- 李伟秋
- 颜炳姜
- 赵显华
- 王爱福
- 尹建华
- 王小东
- 胡振华
- 刘垚
- 刘秀娟
- 夏洪伟
- 张辽远
- 柏士增
- 赵志明
- 林一松
- 林彬
- 邱召华
- 大西一正
- 娄大庆
- 谢祥科
- 轧刚
- 朱学明
- 李超群
- 赵辉
- 刘庆
- 叶民崇
- 李军旗
- 李慧玲
- 王阳
- 聂炎
- 郝立新
- 黄伟
- U·沃格勒
- 刘礼平
- 张云电
- 张建华
- 张隆弟
- 邓建新
- 鞠远明
- 严明
- 刘利群
- 吴曦
- 夏军
- 康敏
- 张建平
- 张曙
- 张雄
- 李新和
- 李立
- 王超群
- 王龙
-
-
-
-
-
-
刘垚;
李斌
-
-
摘要:
The amplitude transformer of the ultrasonic machining can enlarge the amplitude and transfer the acoustic energy to the load efficiently. In order to make amplitude transformer work effective and reliable,it is necessary to have the dynamic characteristics for amplitude transformer. Because the section change of the composite amplitude transformer is complex ,it is difficult to solve it by the traditional design method. The problem is usually solved by the finite element. The paper analyzes the cylinder-index amplitude transformer in dynamic performance by modal analysis and ANSYS computer program. Finally,the work frequency of the best form of vibration is gained.%超声波加工中的变幅杆能放大振幅,并将声能有效传递至工具头.为使变幅杆工作有效、可靠,进而提高零件加工的精度和效率,变幅杆必须具有良好的动态特性.由于复合型变幅杆的截面复杂,用解析法无法进行求解计算,而有限元方法能较好地解决该问题.通过模态分析并利用ANSYS有限元软件,对复合型变幅杆进行动力学分析,最终找出了最佳振动形态的工作频率.
-
-
-
-
刘垚
-
-
摘要:
超声波加工广泛用于玻璃、陶瓷等硬脆性材料,其重要部件———变幅杆直接影响着加工效率。为了有效地将振幅放大并传递到工具头,就需要对变幅杆进行设计和计算。当变幅杆的固有频率等于工作频率时,变幅杆的振幅达到最大,这时对于圆柱圆锥复合型变幅杆可利用波动方程分别求解出圆柱段和圆锥段的共振长度,从而计算出整个变幅杆的长度。%Ultrasonic machining is widely used in the porcessing of glass ,ceramics and other hard brittle materials .The amplitude transformer has an important influence on the machining efficiency in ultrasonic machining system .For enlarging the amplitude of ultrasonic generator ,we need to design and calculate the amplitude transformer theoretically .When the working frequency of the amplitude transformer is equal to itself natural frequency ,the amplitude of the amplitude transformer is of the maxmum ,by use of the characteristic ,the resonance length of the amplitude transformer can be calculated .
-
-
唐军;
赵波
-
-
摘要:
基于运动合成原理,分析了分离型纵-扭复合超声铣削加工的运动特点,阐明了其具有降低切削力、促进切屑排出以及延长刀具使用寿命的实质;基于结构动力学原理,考虑纵-扭复合超声振动对铣削系统动态特性的影响,建立了分离型纵-扭复合超声铣削加工的动力学模型和稳定域的解析模型,在此基础上应用MATLAB 7.1软件进行数值分析获得了切削系统的稳定性预测图谱(即叶瓣图);利用碳纤维复合材料进行分离型纵-扭复合超声振动铣削试验研究,试验结果与数值计算结果基本一致,验证了理论模型与稳定性叶瓣图的正确性.
-
-
-
张云电;
陈炎
- 《第九届全国振动理论及应用学术会议暨中国振动工程学会成立20周年庆祝大会》
| 2007年
-
摘要:
细长孔长径比大于8:1,在切削力的作用下刀具易产生变形,从而影响加工质量和加工效率.特别是对难加工材料的深孔钻削来说,传统细长孔加工钻床受刀具强度及加工材料限制,容易将钻头折断,加工精度低.本文研究了硬脆材料细长孔超声波加工机的结构,分析了细长孔超声波加工技术的特点和机理,对加工刀具进行了设计,并对数控恒力进给系统进行了研究和设计.本文的研究工作为硬脆材料细长孔超声波加工机在生产中的应用奠定了基础.
-
-
-
-
-
-
-
-
-