deposition

摘要： This paper reports the ignition performance of the iodine-fueled radio frequency(RF)ion thruster(IRIT)at different anode temperaturesT_(a0).The experimental results show that the anode temperature plays important role on the ignition process of the IRIT.There were two characteristic temperatures related to the anode:the minimum ignition temperatureT_(i0)and the stable ignition temperatureT_(is),which were much lower than the pipeline temperature and the storage tank temperature.AtT_(a0)deposition-clogging and sublimation-clearing inside the thruster.The research helps improve the preheating design of the iodine-fueled electric thruster.

摘要： The three measurement periods: the TOMS Nimbus-7 TOMSN7L3 v008 from 1978 to 1993, the TOMS EP TOMSEPL3 v008 from 1996 to 2005 and the OMI OMTO3d v003 from 2004 to 2008 have allowed the presence of dust to be observed in the 10°North to 20°North latitudinal band (10 - 20 band) of Africa. The 10 - 20 band has a permanent dust presence. The AERONET data show AOD peaks exceeding 2 in Senegal and Niger (on an AOD scale). The statistical study reveals intra-annual relationships in deposition. In Senegal, a significant deposition is observed.

摘要： Modeling and experiments of the growth of ash deposits during the combustion in a drop tube furnace are presented in this paper.An existing deposition model for ash deposit was used,which involves relationship among the force of gravity,elastic rebound and adhesion forces acting at the moment of ash particle impaction.Important parameters of this model were determined by the experimental data.The influence of particle size and velocity on deposit geometry was investigated.The growth of ash deposits involving various inlet velocities,tube diameters and tube arrangements were simulated with dynamic mesh technique in Fluent.The simulation results show that particle normal impacted velocity plays an important role due to elastic bounce force term.Deposited geometry was influenced by side velocity(velocity of inlet⁃2),and large velocity has an obvious effect to change the shape of deposition and postpone the steady time.

摘要： Inorganic perovskites(Cs Pb X3(X=I,Br,Cl))have broad prospection in the field of high-definition displaying due to its excellent optoelectronic characteristics.The vacuum deposition process possesses advantages and competitiveness in the industrialized production.However,the performance of light emitting diodes(LEDs)based on vacuum-deposited is incredibly low.Herein,we proposed a heating-assisted vacuum deposition(HAVD)method to construct inorganic perovskite LEDs(Pe LEDs)with enhanced performance.The roughness and crystallinity of perovskite film were improved by regulating the heating treatment of substrates.And the perovskite film exhibited largely rise in luminescence,with decreasing defect density.Consequently,with the optimized temperature,the green Pe LEDs exhibited 100-fold improvement of external quantum efficiency(EQE)with the luminance of up to 11941 cd/m2,and the full width at half-maximum(FWHM)of the electroluminescence(EL)spectra was decreased from 25 to 17 nm.At the same time,the red and blue Pe LEDs also exhibited obvious enhancement in EQE and luminance by HAVD method,and both the FWHM of EL spectra dropped below 20 nm,exhibiting excellent high color purity.HAVD strategy has a huge potential to be a new commonly used method for low-cost fabrication of displays and lighting.

摘要： The tuneable band gap property of Cadmium-sulphur-selenide (CdS1–xSex) thin film makes it an appropriate material for a wide range of optoelec-tronic applications and this has aroused a lot of interest. In this paper, we report the study of Cadmium-sulphur-selenide (CdS1–xSex) thin films, successfully grown on commercial glass slide substrate by the chemical bath deposition technique. The effect of selenium content (x value) on the structural, and some optical properties have been studied. The bath solution contained cadmium acetate dehydrate [Cd(CH3COO)2·2H2O], so-dium selenosulphate [Na2SeSO3] and thiourea [CS(NH2)2] were used as the sources of Cd2+, Se2﹣ and S2+, respectively. Tartaric acid (C4H6O6) was used as a complexing agent. The pH of the solution was adjusted to 12 by drop-wise addition of ammonia. The bath temperature was kept at 90°C for a deposition time of 1 hour. Post deposition annealing processes of the thin films were performed in a furnace at a temperature of 400°C for two hours. Both as-deposited and annealed films were characterised by Powder X-Ray Diffraction, Scanning Electron Microscopy, UV-Visible Optical Absorption Spectroscopy and Energy Dispersive X-Ray Analysis. Optical absorption data analysis indicates that direct allowed transitions occur in the films. The band gap of the as-deposited CdS1–xSex decreased linearly from 2.34 eV to 1.48 eV, with increasing selenium content, and in the annealed samples, decreased from 1.84 eV to 1.36 eV. X-ray diffrac-tion measurements revealed, that pure CdS, and CdSe had mixed hexago-nal and cubic phases. All the remaining ternary compounds were com-posed of cubic CdS and hexagonal CdSe phases. The annealed samples showed well defined and more intense peaks, suggesting an improvement in crystallinity. The average grain size increased slightly with increasing selenium content. SEM micrographs showed that the films were compact with a smooth texture and good coverage across the entire area of the substrate.

摘要： Two consecutive growth studies were conducted to investigate the age-dependent nutrient and energy deposition in male and female meat-type chickens (Ross 308) based on feather and feather-free body fraction data determined according to the comparative slaughter technique. Birds were reared under standardized housing conditions (15 floor pens per gender, 5 birds per pen). Both the starter (day 1 to 22) and grower diets (day 22 to 36) were based on corn, wheat, soybean meal, soybean protein concentrate and crystalline feed amino acids. Diets were formulated to ensure an equal feed protein quality close to the ideal amino acid ratio by adjusting a constant mixture of the feed proteins. Individual body weight (BW) and feed intake per pen were recorded weekly. At the start (day 1) as well as on a weekly basis until the end of the 5th week, 15 birds per gender (each 3 pens of 5 birds) were selected and euthanized following 24 h feed deprivation. Subsequently, the feathers were manually removed and quantified. Crude nutrient analysed in representative samples of both feather and feather-free body fractions. The nutrient and energy deposition in the bodies of both genders were significantly increased with increasing age (p . Male birds deposited significantly higher body protein (p and female birds significantly more fat and energy in the whole body (p during the entire growth period. In contrast, no differences were found in protein contents of the BW gain between genders dependent on age (p > 0.05). However, the protein partitioning in the gain of both analyzed body fractions provided oppositional results. Accordingly, male birds yielded relatively more protein in the feather-free body fraction (p and females relatively more feather protein (p as related to the whole body protein gain.

摘要： The objective of this review is to confer semen collection and processing, and semen deposition technique in camel. Artificial insemination is an important technique to ensure rapid genetic improvement in camels. The use of AI has been reported in camel, although insemination trials are rare. The widely accepted methods of semen collection include electro ejaculation and artificial vagina (AV), but flushing of the epididymis with saline solution can also be used as an alternative. Depending on the method of semen processing, semen is usually used in raw condition or after extension. Whole semen is used within minutes or after few hours in the fresh raw method. In short-term preservation or liquid semen (within a few hours or days) and long-term preservation or frozen semen (months or years), extension of the semen ejaculate is carried out by adding extenders which is required in more efficient use of AI. Semen is extended under different temperatures (30°C, 25°C or 4°C), in short-term preservation. Cryopreservation is used to carry out long-term preservation. Different freezing procedures are represented by packaging methods such as ampoules or in plastic straws with different volumes (0.25, 0.5 or 4 ml) and pellets. The best time for insemination can only be determined by rectal palpation of the ovaries and/or ultrasonography. The other alternative is to inseminate at known intervals following induction of ovulation by hormonal treatment with human-chorionic gonadotropin (hCG) or gonadotropin-releasing hormone (Gn-RH). The semen should be deposited into the uterus at least 24 hours after the onset of ovulation. Pregnancy rates depend on the semen extender, site of deposition and number of sperm deposited. Blood or milk progesterone assays, rectal palpation, and ultrasonic image detection of pregnancy are commonly used approaches of pregnancy diagnosis in camel.

摘要： Carbon Capture, Utilization and Storage (CCUS) has been regarded as an indispensable, strategic and pressing technology to reduce anthropogenic carbon dioxide emissions, and mitigate the severe consequences of climate change. Its utilization and storage play important roles in this system and they can be applied for oceanic and underground geological sequestration especially for the oil gas reservoir that needs to improve recovery. For the carbon dioxide flooding process, the crude oil displacement generally shows a better performance with the increase of the pressure. However, carbon disposal is always complex. It could encounter organic solid phase precipitation and deposition in near miscibility environment. The law of multiphase and multicomponent diversification in the whole processes is still poorly understood. We thus used the method of slim tube to get dynamic data during the process. Indeed, the interval of near minimum miscibility pressure was determined. Analysis results of injectivity index and productivity index show that the reservoir blockage primarily appears as the displacement pressure is higher than the near minimum miscibility lower limit pressure and plays an important role in the production capacity. Extortionate or low pressure is not conducive to carbon dioxide displacement.

摘要： Two-dimensional(2D) materials have attracted considerable attention because of their novel and tunable electronic,optical, ferromagnetic, and chemical properties. Compared to mechanical exfoliation and chemical vapor deposition, polymer-assisted deposition(PAD) is more suitable for mass production of 2D materials owing to its good reproducibility and reliability. In this review, we summarize the recent development of PAD on syntheses of 2D materials. First, we introduce principles and processing steps of PAD. Second, 2D materials, including graphene, MoS2, and MoS2/glassy-graphene heterostructures, are presented to illustrate the power of PAD and provide readers with the opportunity to assess the method. Last, we discuss the future prospects and challenges in this research field. This review provides a novel technique for preparing 2D layered materials and may inspire new applications of 2D layered materials.

摘要： A new pulsed chemical vapor deposition (PCVD) process has been developed to fabricate iron (Fe) and iron carbide (Fe1-xCx) thin films at low temperature range from 150°C to 230°C. The process employs bis(1,4-di-tert-butyl-1,3-diazabutadienyl)iron(II) as iron source and hydrogen gas or hydrogen plasma as the coreactant. The films deposited with hydrogen gas are demonstrated polycrystalline with body-centered cubic Fe. However, for the films deposited with hydrogen plasma, the amorphous phase of iron carbide is obtained. The influence of the deposition temperature on iron and iron carbide characteristics have been investigated.