模锻锤
模锻锤的相关文献在1980年到2022年内共计189篇,主要集中在金属学与金属工艺、经济计划与管理、矿业工程
等领域,其中期刊论文102篇、会议论文7篇、专利文献2762篇;相关期刊41种,包括西北工业大学学报、设备管理与维修、锻造与冲压等;
相关会议7种,包括第十四届中国国际锻造会议暨2013年全国锻造企业厂长会议、第十三届中国国际锻造会议暨2012年全国锻造企业厂长会议、第十二届中国国际锻造会议暨2011年全国锻造企业厂长会议等;模锻锤的相关文献由339位作者贡献,包括刘福海、王卫东、周斌等。
模锻锤
-研究学者
- 刘福海
- 王卫东
- 周斌
- 孙红育
- 范爱敏
- 仝国强
- 伍玉民
- 刘衍巧
- 张先果
- 张方军
- 田其伟
- 刘玉斌
- 常民
- 张志强
- 张长龙
- 杨玉杰
- 王春晓
- 刘巍
- 卢新莉
- 孙树元
- 尚志军
- 张利彩
- 张士清
- 朱文渊
- 李永堂
- 李洋
- 江世忠
- 沈炎
- 王国栋
- 王振
- 王树东
- 聂国清
- 胡瑞强
- 谢富豹
- 赵士英
- 赵林华
- 陈亮
- 马滨臣
- 高书文
- 黄吕权
- 丁银亭
- 严厚广
- 于顺廷
- 任雨松
- 何社阳
- 余锦
- 刘军
- 刘建生
- 刘恩奎
- 华万红
-
-
张向卓;
李文新;
李士磊
-
-
摘要:
主要是针对形状简单较易成形的锻件,借用Deform-3D软件,模拟并优化成形工艺,设计镦粗台,并在模具上设计定位余块,在模锻锤上实现精密锻造,以提高生产率,节省原材料,并降低后续的加工成本,提高设备的生产能力.
-
-
-
-
-
-
-
-
-
-
刘保民;
冯俊华
-
-
摘要:
液压支架中的缸底是支架的重要零件,因形状比较复杂,且生产批量比较小,常采用镶块模进行开式模锻.在试制一新型的Φ400mm大缸底时,因其超出现有50kN模锻锤的负荷能力,经过多次对闭式模锻和开式模锻的分析研究,最终利用闭式模锻工艺解决了问题.%The cylinder bottom is an important part in the hydraulic support, but the production batch is small because of the complex shape.Therefore, it's always formed by use of the open-die forging process with insert mode. Due to equipment constraints,the cylinder bottom with more than 0320 mm has normally formed by casting technology.However, during a manufacture testing for a new support with 0400 mm cylinder bottom,the 50kN die forging hammer has been exceeded its load capacity.Since the casting has crude internal metal structure and low mechanical property,the die forging technology has been considered. After repeated analysis and researching of the open-die forging and closed die forging, the above problems have been solved ultimately by use of closed-die forging process.