柱塞套
柱塞套的相关文献在1973年到2023年内共计308篇,主要集中在农业工程、能源与动力工程、金属学与金属工艺
等领域,其中期刊论文109篇、会议论文2篇、专利文献137051篇;相关期刊49种,包括河北农机、江苏农机化、农业开发与装备等;
相关会议2种,包括中国汽车工程学会材料分会第十届理化检测、失效分析学术交流会、2009年全国失效分析学术会议等;柱塞套的相关文献由347位作者贡献,包括高广林、高峰、顾融融等。
柱塞套—发文量
专利文献>
论文:137051篇
占比:99.92%
总计:137162篇
柱塞套
-研究学者
- 高广林
- 高峰
- 顾融融
- 刘慧
- 胡燚
- 任广兰
- 缪映映
- 朱仁义
- 吴英杰
- 宋军
- 段辉银
- 殷建平
- 毛巍峰
- 翁付珍
- 翁春杰
- 邵明聪
- 陈云龙
- 唐宗伦
- 张增渠
- 徐俊伟
- 林跃明
- 胡茂其
- 吴阿大
- 张建新
- 李明诚
- 李飞扬
- 杨仕琴
- 杨涛
- 王利明
- 王景斯
- 胡云泽
- 许啸秋
- 陈斌
- 黄世海
- 丁万胜
- 伍中宇
- 何蓉
- 侯宏智
- 俞珍闯
- 冯修岚
- 冯继军
- 冷璞
- 刘丽
- 刘云
- 刘生良
- 刘畅
- 华峥
- 吕学敏
- 姜文革
- 季元
-
-
-
-
-
滕子强
-
-
摘要:
由于某型船主柴油机高压泵在设计上考虑不周,导致安装时O型密封圈损伤,从而造成喷油泵的滑油进入柴油腔,文章针对这一故障现象,经过多次分析和对比,对喷油泵的安装设计进行了改进.
-
-
-
金林奎;
廖森梁;
黄持伟;
邹文奇;
樊开夫
-
-
摘要:
The physical and chemical testing and failure reason analysis were done to the fractured ductile iron sleeve of a ship anchor machine.The results show that both the coarse grain of the casting because of the high casting temperature of the liquid iron and the long sealing time,and the more porosity and pore defects because of the liquid iron not feeding in time when solidification,significantly reduced the strength and increased the brittleness of the casting.The strong impact of shot peening treatment make micro cracks produce on the workpiece surface, which brought great cracking possibility to the workpiece.The brittleness of the ferrite at subsurface layer of the workpiece was high due to the high silicon content,which further increased the cracking tendency of the workpiece. Under the high pressure of inner cavity of the sleeve,the multiple step crack sources were generated at the weak positions of the upper cover edge,and the crack continued to expand to the whole upper cover.%对某开裂失效的轮船锚机球墨铸铁柱塞套进行了理化检验和失效原因分析。结果表明:由于铁液的浇铸温度偏高,封箱时间过长,导致铸件晶粒粗大,同时铁液凝固时补缩不及时,造成较多的疏松和孔洞缺陷,因而显著降低了铸件的强度,增加了脆性;喷丸处理时极强的冲击力使工件表层留下较多的微裂纹,给工件使用开裂带来极大的隐患;工件次表层的铁素体层,因硅含量高脆性大,进一步增加了工件脆性开裂的倾向。在柱塞套内腔的高压作用下,首先沿上盖边缘强度较为薄弱的部位产生多台阶裂纹源,裂纹不断扩展直至整个上盖掀起开裂。
-
-
-
-
李涛;
徐忠芳;
巩员君
-
-
摘要:
针对机械式喷油泵柱塞套紧固螺柱出现的断裂故障,对故障螺柱的原材料、金相组织、热处理工艺,以及螺柱的检测方法进行了分析,并提出了有针对性地改进措施,最后通过校车试验及理化分析验证了改进方案的可行性.
-