two

摘要： 作为世界领先的丹宁面料品牌,ISKO^TM—直走在时尚可持续、负责任发展运动的前沿。ISKO^TM一贯致力于可持续生产和发展,希望帮助保护地球有限的资源,并尽力在面料的产品生命周期中减少各种资源浪费。最近ISKO推出了开创性的“R-TWO”概念,即在丹宁面料的生产过程中使用循环再用棉花(re-used cotton)和再生涤纶(recycled polyester)。

摘要： 英文字母算式谜数学与英语,表面上看来好像是南辕北辙,关系疏远,其实两者之间也是互有联系的。比如一道简单的数学算式5+2+1=8,用英语单词表示是FIVE+TWO+ONE=EIGHT,列出竖式是:有人根据这个算式编成了一道数学算式谜:如果上面的字母分别表示0~9这10个数字,相同的字母表示相同的数字,现在已知W=4,G=5,N=7,那么要使这个算式成立,其他字母各应表示什么数字?

摘要： Beijing’s weather in the first week of March was by far the finest yet this year.The city was where the annual“Two Sessions”of the NPC and CPPCC took place earlier in March.As was the practice in previous years,the Chinese government usually reveals its future plans and ongoing work to the world during the two weeks of the Two Sessions,a time in which international journalists tend to flock to China to cover the event.

摘要： 要点梳理一般过去时表示在过去某个时间或过去某一段时间内发生的动作或存在的状态。一、一般过去时的标志1.一般过去时常和表示过去某时间的状语连用,如yesterday、yesterday morning / afternoon / evening、last night、in 1995、two days ago、just now等;也可与often或always等表示频度的状语连用,用来表示过去经常发生的动作。

摘要： I''m a little snowman.Look at me.These are my buttons(纽扣).One,two,three.These are my eyes,And this is my nose.

摘要： 真力GENELEC这个品牌,因其客户主要是一些专业音频工作者,对于部分发烧友来说可能觉得有点神秘。作为2018年11月刊的封面——真力40周年特别访谈,笔者亦籍此契机,深入了解这个品牌的文化。直至今日,终于有机会能亲手把玩GENELEC G Two。

摘要： A broadband microstrip patch antenna, loaded E-U-shaped open slot on backward of radiating layer is proposed and experimentally investigated. The antenna employs a foam-filled dielectric substrate, whose dielectric constant is within the lower end of the range. The proposed antenna has been designed for electromagnetic analysis including the impedance bandwidth, reflection coefficient, radiation pattern, and antenna gain. The open slot is loaded on the back radiated layer, which is perpendicular to the radiating edge of the oblong microstrip patch component, where the symmetric line feed is selected. This new technique used to increase the bandwidth and the gain of antenna through increasing current path by slot location, width and length on backward of radiating Layer. The main structure in this research was a single microstrip patch antenna planar with three layers operating at two resonant frequencies 4.440 GHz and 5.833 GHz. All the simulated results are confirmed by two packages of electromagnetism simulation. An impedance bandwidth (S11 ≤ ?10 dB) up to about 41.03% and 30.61% is achieved by individually optimizing its parameters. The antenna exhibits nearly stable radiation pattern with a maximum gains of 8.789 dBi and 9.966 dBi, which is suitable for Wi-Fi Band, satellite communications, and wireless presented. Whereas the results before this design that we have a proof of publication are 36.17% and 28.43%.

摘要： Results from a series of studies on the stream-wise vibration of a circular cylinder verifying Japan Society of Mechanical Engineers Standard S012-1998, Guideline for Evaluation of Flow-induced Vibration of a Cylindrical Structure in a Pipe, are summarized and discussed in this paper. Experiments were carried out in a water tunnel and in a wind tunnel using a two-dimensional cylinder model elastically supported at both ends of the cylinder and a cantilevered cylinder model with a finite span length that was elastically supported at one end. These cylinder models were allowed to vibrate with one degree of freedom in the stream-wise direction. In addition, we adopted a cantilevered cylinder model that vibrated with two degrees of freedom in both the stream-wise and cross-flow directions under the same vibration conditions as an actual thermocouple well. The value of the Scruton number (structural damping parameter) was changed over a wide range, so as to evaluate the value of the critical Scruton number that suppressed vibration of the cylinder. For the two-dimensional cylinder, two different types of stream-wise excitations appeared in the reduced velocity range of approximately half of the resonance-reduced velocity. For the stream-wise vibration in the first excitation region, due to a symmetric vortex flow, the response amplitudes were sensitive to the Scruton number, while the shedding frequency of alternating vortex flow was locked-in to half of the Strouhal number of vibrating frequency of a cylinder in the second excitation region. In addition, the effects of the aspect ratio of a cantilevered cylinder on the flow-induced vibration characteristics were clarified and compared with the results of a two-dimensional cylinder. When a cantilevered circular cylinder with a finite length vibrates with one degree of freedom in the stream-wise di-rection, it is found that acylinder with a small aspect ratio has a single excitation region, whereas a cylinder with a large aspect ratio has two excitation regions. Furthermore, the vibration mechanism of a symmetric vortex flow was investigated by installing a splitter plate in the wake to prevent shedding of alternating vortices. The vibration amplitude of acylinder with a splitter plate increased surprisingly more than the amplitude of a cylinder without a splitter plate. For a cantilevered cylinder vibrating with two degrees of freedom, the Lissajous figure of vibration of the first excitation region shows the trajectories of elongated elliptical shapes, and in the second excitation region, the Lissajous trajectories draw a figure “8”. The results and information from these experimental studies proved that Standard S012-1998 provides sufficient design methods for suppressing hazardous vibrations of cylinders in liquid flows.

摘要： 本发明涉及气垫船运动控制领域，具体涉及的是一种基于纵向速度规划的气垫船高速回转控制方法。本发明采用基于侧滑角约束的航速规划方法解决了气垫船采用传统非线性反馈控制在高速回转时的失速问题，能够保证气垫船在回转的同时实现精确的航速跟踪，提高了气垫船的机动性和作业能力，本发明在保证气垫船在高速回转过程中准确跟踪期望艏向的同时避免回转率过大导致的甩尾现象，提高了气垫船在高速回转时的可靠性和安全性。

摘要： 本发明适用于材料技术领域，提供了一种低光泽度聚氯乙烯材料及其制备方法、应用，其中，所述低光泽度聚氯乙烯材料包括以下重量份数的原料：聚氯乙烯树脂80～100份、稳定剂1～10份、增塑剂4～15份、加工助剂0.8～5份、改质剂4～15份、消光剂0～5.5份以及润滑剂0.5～5份。本发明通过稳定剂、增塑剂、加工助剂、改质剂、消光剂以及润滑剂各原料的合理配比，配合特定种类的聚氯乙烯树脂，所得到的低光泽度聚氯乙烯材料，不仅易于加工成型、且具有较为优异力学性能，且低光泽度，耐温以及成本低；另外，通过消光剂的加入可进一步降低材料光泽度的同时，进一步提高本发明聚氯乙烯材料机械力学性能，具有很好的经济效益。

摘要： 本发明涉及光纤耦合技术领域，尤其涉及一种高效率的叠阵型半导体激光器，包括激光源、光束整形组件、会聚透镜、鲍威尔棱镜组件和光纤；所述激光源发出的光束经过光束整形组件进行整形；整形后的光束经会聚透镜会聚，会聚后光束经过鲍威尔棱镜组件进行光束整形可以耦合进光纤的光束。本发明系统结构简单,便于操作,减少了操作步骤,光纤耦合效率达到84.3％。

摘要： 本申请公开了一种变频空调控制方法、装置、电子设备和介质。其中方法包括：获取空调的设置温度值，获取当前室内温度值；根据所述设置温度值、所述当前室内温度值和预设偏差阈值，确定所述变频空调的系统负荷率；获取当前室外温度值，获取所述变频空调的目标器件的信息；依据所述当前室外温度值、所述目标器件的信息以及所述系统负荷率，确认总传热温差；以达到所述总传热温差为目标，对所述变频空调的制冷系统进行控制，可以控制空调系统在不同负荷率下、不同室外温度值下运行在比较高的能效，实现空调系统节能运行。

摘要： 本发明涉及兽医生物技术领域，尤其涉及一种猪轮状病毒重组蛋白以及表达该蛋白的重组腺病毒和应用。所述所述重组蛋白由猪轮状病毒5型VP7蛋白和猪轮状病毒9型VP8蛋白连接组成，具体包括如SEQ ID NO:1所示的氨基酸序列。本发明将猪轮状病毒5型VP7蛋白和猪轮状病毒9型VP8蛋白的编码基因的基因序列构建至腺病毒表达载体中，并进行密码子优化，制备得到针对猪轮状病毒的重组腺病毒，该重组腺病毒表达的目的蛋白的结构和功能与天然状态完全一致，具有较高的安全性和免疫原性。

摘要： 本发明公开了一种改性TPEE电缆料及其制备方法，所述改性TPEE电缆料，按重量份数计，其组分包含改性TPEE100份，阻燃剂50‑100份，阻燃协效剂2‑10份，润滑剂1‑5份，抗氧剂1‑5份，助剂5‑10份。本发明提供的改性TPEE电缆料通过对TPEE接枝功能化石墨烯，以及对阻燃剂氢氧化镁进行改性，使其兼具优异的阻燃性能，力学性能，热老化性能以及加工性能，并且可回收利用，环境友好。

摘要： 本发明公开了一种路线规划方法，包括：获取N个订单的物流信息，所述物流信息包括订单地址，所述订单地址包括第一地址以及第二地址，其中，所述第一地址为目的地在直送范围内的地址，所述第二地址为目的地在直送范围外的地址，N为正整数；筛选出所述订单地址为所述第一地址的M个订单，确定配送M个订单的第一初始路线，对所述第一初始路线进行优化，得到第一优化路线，M为小于等于N的正整数；筛选出所述订单地址为所述第二地址的N‑M个订单，确定配送所述N‑M个订单的第二初始路线，对所述第二初始路线进行优化，得到第二优化路线。

摘要： 本发明公开了一种芳砜纶/四氧化三铁磁性长丝的制备方法，包括如下步骤：四氧化三铁磁性纳米颗粒制备、芳砜纶/四氧化三铁共混纺丝液制备、湿法纺丝，得到具有不同截面形状的磁性长丝。本发明可以实现芳砜纶的连续化湿法纺丝，制备过程温和可控；本发明将四氧化三铁磁性颗粒结合到芳砜纶纤维中，可以实现芳砜纶纤维的功能化，使得芳砜纶纤维具备磁性；本发明采用蛋白模板调控法制备四氧化三铁磁性颗粒，实现四氧化三铁磁性颗粒形貌及尺寸调控，同时使得纳米颗粒在纺丝液中分散均匀性；本发明制备的芳砜纶/四氧化三铁磁性长丝可用于保健、过滤、智能纺织品等领域。

摘要： 本发明属于污水处理技术领域，尤其是涉及一种污水水质预处理快速检测装置，包括检测水箱，检测水箱内壁上固定连接有第一竖板和第二竖板，第一竖板和第二竖板将检测水箱分隔成处理腔室、检测腔室和储存腔室，处理腔室内底壁上固定连接有向下延伸的梯形凸起，且梯形凸起内形成沉淀腔室，梯形凸起的下端固定连接有两根竖直的排污管，检测水箱的侧壁上固定连接有与处理腔室连通的污水进水管。优点在于：本发明可以对不同分层的污水进行水质检测，且多层之间的检测过程均为独立过程，不会出现相互之间的影响，能够对污水进行实时的检测，有助于后续的数据统计，另外采用分级式的检测方式，能够有效的对污水进行全面的检测，提高检测的质量。

摘要： 本发明公开了一种软硬件联合验证系统及方法。该系统包括：驱动软件、基于systemc模拟的存储器和异构集群；驱动软件嵌入在systemc框架中；驱动软件根据预设验证需求向异构集群发送驱动指令；存储器加载并保存待验证数据；异构集群根据驱动指令从存储器中提取待验证数据，计算得到输出数据，发送至驱动软件；驱动软件根据输出数据进行软硬件的联合验证。通过systemc模拟异构集群，驱动软件嵌入systemc框架，为驱动软件提供与硬件功能相等的模型，实现驱动软件对硬件的控制流程，协助软件前期的开发与调试，为硬件提供标准数据。解决了现有技术中软件与硬件在大多数的系统开发中分开进行，导致开发周期长的技术问题。