organic

摘要： CH_(4) storage associated with adsorbed natural gas(ANG)technology is an issue attracting great concern.Following the Advanced Research Project Agency-Energy(ARPA-E)targeted deliverable capacity of 315 cm^(3)·cm^(-3)(STP),hundreds of thousands of materials have been experimentally or theoretically evaluated,while the best results still show a 35% gap from the target.Moreover,recent theoretical research reveals that the target is beyond the possibility that real materials can be designed.To get rid of the awkward situation,we make attempts on investigating the CH_(4) delivery performance under other operation conditions.Methods of raising the discharge temperature(to infinite high)or elevating the storage pressure(to 25 MPa)have been proved to show limited effectiveness.In this work,it is found that the ARPA-E target can be achieved by using a decreasing storage temperature strategy.By taking 280 CoRE(computation-ready,experimental)COFs(covalent organic frameworks)as ANG materials,when reduce the storage temperature to 190.6 K,the highest deliverable capacity can reach 392 cm^(3)·cm^(-3)(STP),and 16.1% CoRE COFs can surpass the target.The target is also achievable when storage at 220 K.Structure performance relationships study shows strong correlation between deliverable capacity and void fraction.Hence,120 hypothetical COFs are generated to ascertain the optimum void fraction.In addition,the performance of 2D-COFs can be greatly enhanced by increasing the interlayer spacings,e.g.CH_(4) deliverable capacity(storage at 190.6 K)of ATFG-COF can be improved from 239 to 411 cm^(3)·cm^(-3)(STP)when interlayer spacing is enlarged to 1.65 nm.

摘要： OLED英文为Organic Light-Emitting Diode,即有机发光二极管,1987年由华裔邓青云发明.从表面看,OLED就是在LED的基础上加了一个单词有机(Organic),但是与LED则完全不同.介绍了OLED的在车灯上的应用,OLED的优点,OLED的种类,在车灯上呈现的3D炫彩夺目的效果,OLED的未来的发展方向,OLED需要继续改进的方向.

摘要： Room-temperature phosphorescence (RTP) has drawn widespread attention recently owing to the unique long-lived triplet excited states and potential applications in light-emitting diodes (LEDs)[1], optical imaging [2], photodynamic therapy [3], and information security [4]. Particularly, RTP materials can effectively utilize the triplet excitons to maximize the internal quantum yield in electroluminescent fields. However, to date, the most efficient phosphors are still limited to noble metal-containing compounds (such as iridium and platinum complexes), which have some intrinsic obstacles, such as metal scarcity and high bio-toxicity.

摘要： Tea is grown in Bangladesh under marginal climatic and soil conditions. Its production is greatly influenced by many physical, chemical, biological and natural factors. The increasing land use intensity without adequate and balanced use of chemical fertilizers and with little or no use of organic manure has caused severe fertility deterioration of our soils resulting in stagnating or even declining of crop productivity. The need of the hour is to achieve substantially higher crop yield than the present yield levels from our limited land resources on a sustainable basis. A feasibility study was carried out of one and only organic tea garden namely Kazi & Kazi Tea Estate at Panchaghar and compared to ordinary tea gardens located at Sylhet namely Zareen Tea Estate, Nurjahan Tea Estate and Malnichara Tea Estate as secondary data to investigate the fertility status of soil. Results of the present study showed that soil solutions were acidic in nature in all seasons. Medium to high soil organic matter, medium to high available iron and phosphorous, and low availability of potash showed that soils were not sufficiently fertile for crop production. Student t-test values of all the parameters with control sample showed statistically significant results for SOM and available P. The critical values have been fixed at 0.1% for N and 1% for OM, 10 μg/g for P, 80 μg/g for K, 25 μg/g for Mg, 90 μg/g for Ca, 2 μg/g for Zn and 20 μg/g for S. The nutrient status is much higher in Kazi & Kazi organic tea estate in compared to other ordinary tea estates in Bangladesh.

摘要： Corrosion of reinforced concrete is the most important cause of concrete structure deterioration. In the present study, the protective effect of the reinforcement mortars against corrosion is examined. In particular, the chloride penetration resistance on reinforced cement mortars using organic coating as additive containing was studied. The aforementioned additive consists of corrosion inhibitor for protection of steel rebars against pitting corrosion. For the experimental procedure, four (4) different types of reinforced mortars were prepared. The corrosion protection of the additive was evaluated by electrochemical methods, (linear polarization resistance, Half-cell Potential Resistance and Electrochemical Impedance Spectroscopy). In addition, the mass loss of steel rebars against time of partially immersed in NaCl solution was carried out in the lab. The experimental results showed that in all examined cases the organic coating provides anticorrosion protection on steel rebars against chlorides.

摘要： Precursor (Metal-organic decomposition (MOD)) inks are used to fabricate 2D and 3D printed conductive structures directly onto a substrate. By formulating a nanoalloy structure containing multiple metals, the opportunity to modify chemical and physical properties exists. In this paper, a copper-nickel bimetallic nanoalloy film was fabricated by mixing copper and nickel precursor inks and sintering them in vacuum. The individual elemental inks were formulated and characterized using SEM, EDS, and XRD. During thermal processing, elemental copper forms first and is followed by the formation of bimetallic copper-nickel alloy. The encapsulation of the underlying copper by the nickel-rich alloy provides excellent oxidation resistance. No change in film resistance was observed after the film was exposed to an oxygen plasma. Nanoalloy films printed using reactive metallic inks have a variety of important applications involving local control of alloy composition. Examples include facile formation of layered nanostructures, and electrical conductivity with oxidative stability.

摘要： This research examined small farmers’ operational choice in converting to organic farming in the Southern region of the United States. A logistic model fitted to survey data from responses of 456 produce growers found the key determinants of the conversion choices of farmers and offered quantitative impacts of the major influential factors retained in the fitted model. Among them, barriers to the conversion were linked to farmer’s age, risk aversion, years of farming, and the lack of education as well as low yield of organic farming;nevertheless, the model also revealed the existence of stimuli reflecting on access to farmers markets, peer exemplars, and operational scale. The confluence of variables retained partially explained a slow but steady conversion to organic farming in the United States. Besides the broad implication for policy making in the agricultural sector, this study found that organic farming was closely tied to small farms and organic farming could be a back road to the future of small US farms.

摘要： Carbon Capture, Utilization and Storage (CCUS) has been regarded as an indispensable, strategic and pressing technology to reduce anthropogenic carbon dioxide emissions, and mitigate the severe consequences of climate change. Its utilization and storage play important roles in this system and they can be applied for oceanic and underground geological sequestration especially for the oil gas reservoir that needs to improve recovery. For the carbon dioxide flooding process, the crude oil displacement generally shows a better performance with the increase of the pressure. However, carbon disposal is always complex. It could encounter organic solid phase precipitation and deposition in near miscibility environment. The law of multiphase and multicomponent diversification in the whole processes is still poorly understood. We thus used the method of slim tube to get dynamic data during the process. Indeed, the interval of near minimum miscibility pressure was determined. Analysis results of injectivity index and productivity index show that the reservoir blockage primarily appears as the displacement pressure is higher than the near minimum miscibility lower limit pressure and plays an important role in the production capacity. Extortionate or low pressure is not conducive to carbon dioxide displacement.