美国防腐工程师协会_国内外标准网文献检索下载

1.[标准] NACE/PODS Joint Standard Practice External Corrosion Direct Assessment (ECDA) Integrity Data Exchange (IDX)

NACE/PODS联合标准实施规程外部腐蚀直接评估（ECDA）完整性数据交换（IDX）

发布单位：
美国-美国防腐工程师协会(US-NACE)

标准状态：
现行

标准号：
NACE SP0507-2021

发布时间：
2021-11-23

中标分类：
-

国标分类：
-

实施时间：

摘要： This standard addresses ECDA indirect inspection data, including close-interval surveys (CIS), aboveground coating evaluation surveys (e.g., direct-current voltage gradient [DCVG] and Pearson survey), and corrosiveness of environment surveys (e.g., linear polarization resistance [LPR] probe surveys and pH/soil resistivity surveys).This standard does not address specific procedures for performing surveys, validating, or interpreting indirect inspection data.Sound engineering practice and common sense should be used to assure that survey data are valid. Error checks should be made at regular intervals to ensure the quality of data recorded and stored.Some users may not find it applicable to their use.
2.[标准] Coating Systems (External) for Pipeline Trenchless Crossings

管道非开挖穿越的涂层系统（外部）

发布单位：
美国-美国防腐工程师协会(US-NACE)

标准状态：
现行

标准号：
NACE AMPP SP21443-2021

发布时间：
2021-07-27

中标分类：
-

国标分类：
-

实施时间：

摘要： This AMPP standard practice establishes minimum requirements for the application and inspection of coating systems (external) for directional drill applications.This specification applies to previously coated or uncoated pipe that is to be coated for directional drills, road bores, and areas where extra abrasion resistance is required.
3.[标准] Corrosion Inhibition Selection and Management for Oil and Gas Production

油气生产中缓蚀剂的选择与管理

发布单位：
美国-美国防腐工程师协会(US-NACE)

标准状态：
现行

标准号：
NACE SP21469-2021

发布时间：
2021-03-26

中标分类：
-

国标分类：
-

实施时间：

摘要： This NACE Standard Practice aims to provide guidance for selection and application of Corrosion Inhibitors (CI) for upstream oil and gas processes conditions exposed to corrosive environments.The application of effective Corrosion Inhibitors (CI) in Oil and Gas production is essential to enable long term use of carbon steel in corrosive production environments. These chemical CI products can be applied continuously, or on a Batch (BI) basis. The effectiveness of CIs(products) that are applied has to be assured for the range of conditions associated with the application and for the lifetime of the facility. The assurance is predominantly achieved through laboratory testing. However, field evaluation of CIs can be a significant part of the assurance process.
4.[标准] Procedure for Determining Conformance to Concrete Surface Profile Requirements

确定是否符合混凝土表面轮廓要求的程序

发布单位：
美国-美国防腐工程师协会(US-NACE)

标准状态：
现行

标准号：
NACE AMPP SP21513-2021

发布时间：
2021-10-06

中标分类：
-

国标分类：
-

实施时间：

摘要： This standard describes a procedure suitable for laboratory and field use to determine conformance to specified surface profile on concrete substrates using Method 1: Depth micrometer as described in ASTM(1) D8271,1 Method 2: Concrete Surface Profile (CSP) Chips (CSP 1-10) as described in ICRI(2) Guideline No. 310.2R,2 or Method 3: Replica putty as described in ASTM D76823 (Method 3A-visual or Method 3B-quantitative).
5.[标准] External Corrosion Control of Underground Storage Tank Systems by Cathodic Protection

用阴极保护控制地下储罐系统的外部腐蚀

发布单位：
美国-美国防腐工程师协会(US-NACE)

标准状态：
现行

标准号：
NACE SP0285-2021

发布时间：
2021-09-21

中标分类：
-

国标分类：
-

实施时间：

摘要： This standard presents standard practices for effective control of external corrosion of UST systems by CP. It is intended to serve as a guideline to establish minimum requirements for using CP to control external corrosion of metallic UST systems, including those used to contain oil, gas, and water, and that are buried, partially buried, or in contact with the soil.
6.[标准] Standard Guide for Laboratory Immersion Corrosion Testing of Metals

金属实验室浸没腐蚀试验的标准指南

发布单位：
美国-美国防腐工程师协会(US-NACE)

标准状态：
现行

标准号：
NACE TM0169-2021/ASTM G31-21

发布时间：
2021-01-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This guide covers and describes the factors that influence laboratory immersion corrosion tests, particularly mass loss tests. These factors include apparatus, sampling, test specimen, test conditions (test solution composition, temperature, gas sparging, fluid motion, solution volume, method of supporting test specimens, duration of test), methods of cleaning test specimens, imterpretation of results, and calulation of corrosion rates. This guide also emplasizes the importance of recording all pertinent data and provides a checklist for reporting test data.
7.[标准] Inspecting and Reporting Biofouling and Antifouling Systems' Condition during Underwater Inspections on Ships

在船舶水下检查期间检查并报告生物污染和防污系统的状况

发布单位：
美国-美国防腐工程师协会(US-NACE)

标准状态：
现行

标准号：
NACE AMPP SP21487-2021

发布时间：
2021-08-05

中标分类：
-

国标分类：
-

实施时间：

摘要： This AMPP standard practice aims to provide a source of consistent information and guidance on best practices for meaningful and effective reporting of the biofouling and AFS condition during an underwater inspection.The document provides a methodology for planning, conducting, and reporting the outcome of underwater inspections in terms of biofouling and AFS condition on ships.
8.[标准] Continuous Measurements for Determination of Aerospace Coating Protective Properties

航空航天涂层防护性能测定的连续测量

发布单位：
美国-美国防腐工程师协会(US-NACE)

标准状态：
现行

标准号：
NACE AMPP TM21449-2021

发布时间：
2021-09-02

中标分类：
-

国标分类：
-

实施时间：

摘要： This standard describes three Test Methods for conducting a coating evaluation for comparative performance testing, coating specification, and coating quality acceptance testing. The standard is organized to provide a general description of the Test Method (Sections 1 - 6) with three mandatory appendices that are arranged by coating protective properties and failure progression.
9.[标准] The Use of Coupons for Cathodic Protection Monitoring Applications

阴极保护监测应用中试片的使用

发布单位：
美国-美国防腐工程师协会(US-NACE)

标准状态：
现行

标准号：
NACE SP0104-2020

发布时间：
2020-08-04

中标分类：
-

国标分类：
-

实施时间：

摘要： The purpose of this standard is to provide a method for evaluating the effectiveness of a CP system using coupons. It is intended for use by people who design and maintain CP systems for buried or submerged pipelines, underground storage tanks (USTs), on-grade storage tank bottoms, reinforcing steel in concrete, water storage tanks, and various other structures in buried or aqueous environments.
10.[标准] Application Process for Optimum Paint and Coating Systems' Performance for Navy Ships

海军舰船最佳油漆和涂层系统性能的应用工艺

发布单位：
美国-美国防腐工程师协会(US-NACE)

标准状态：
现行

标准号：
NACE SP21416-2020

发布时间：
2020-10-13

中标分类：
-

国标分类：
-

实施时间：

摘要： This NACE/EFC standard is considered as the basis for the cleaning, surface preparation, and application of paint and coating systems to Navy ships used in marine environments for New Build, and during Life Cycle maintenance and permanent repair. It is intended for use by naval corrosion control personnel, coating applicators, and coating manufacturers. It covers coating materials, coating test protocol and acceptance criteria, surface preparation, coating application, quality assurance and control, and repair methods. Its purpose is to facilitate more effective corrosion protection of Navy ships and support inter-operability requirements by presenting reliable information and providing guidelines for coating manufacturers and shipyards to develop more durable specifications.This standard replaces NATO Allied Engineering Publication (AEP) 59.
11.[标准] Corrosion Prevention and Control Planning

腐蚀预防和控制规划

发布单位：
美国-美国防腐工程师协会(US-NACE)

标准状态：
现行

标准号：
NACE SP21412-2016/SSPC-CPC 1

发布时间：
2020-03-05

中标分类：
-

国标分类：
-

实施时间：

摘要： This standard on corrosion prevention and control (CPC) planning is intended to support future CPC improvements to national acquisition and sustainment of products and facilities at an acceptable cost. It provides a standardized framework for a supplier?s plan to control corrosion of supplied products and facilities. The standard is intended for use by public and private facility owners/acquisition agencies that require their suppliers to provide corrosion prevention and control procedures as a deliverable provided with the purchased products and facilities. The standard includes:Attributes of the supplied product or facility that require planning for CPC;Considerations for material selection and design of a product or facility to minimize corrosion;Items or topics that should be addressed in a CPC plan;Items or topics that should be addressed in CPC planning which affect CPC in design, fabrication and construction, operation and use, and maintenance and sustainability;Characteristics of the key elements of CPC planning;New in this revision—Approaches to CPC assessment.
12.[标准] Field-Applied, Heat-Shrinkable-Sleeve Coating System for Pipelines: Application, Performance, and Quality Control

管道用现场应用热收缩套管涂层系统:应用、性能和质量控制

发布单位：
美国-美国防腐工程师协会(US-NACE)

标准状态：
现行

标准号：
NACE SP0303-2020

发布时间：
2020-10-01

中标分类：
-

国标分类：
-

实施时间：

摘要： Revised in 2020, this NACE International standard practice provides current technology and industry practices for the use of field-applied heat-shrinkable-sleeve coating systems. The standard is intended for use by corrosion control personnel, design engineers, project managers, purchasers, and construction engineers and managers. It is applicable to underground steel pipelines in the oil and gas gathering, distribution, and transmission industries.The standard practice presents guidelines for establishing minimum requirements to ensure proper application and performance of field-applied, heat-shrinkable sleeves to the external surfaces of coated pipe. Included are methods for (1) qualifying and controlling the quality of a heat-shrinkable sleeve, (2) guidelines for proper application, and (3) inspection and repair techniques to ensure its long-term performance. The standard is applicable to coating systems used to prevent corrosion in conjunction with cathodic protection, and heat-shrinkable wraparound- or tubular-type sleeve coating systems, underground steel pipelines.
13.[标准] Prioritization of External Corrosion on Piping Within Metallic Casings using In-Line Inspection Data

使用在线检测数据对金属套管内管道的外部腐蚀进行优先排序

发布单位：
美国-美国防腐工程师协会(US-NACE)

标准状态：
现行

标准号：
NACE SP21475-2020

发布时间：
2020-12-02

中标分类：
-

国标分类：
-

实施时间：

摘要： This NACE International standard provides the most current technology and industry practices for prioritization of cased piping using In-Line Inspection (ILI) data.Metallic casings are used to install and protect the carrier pipe at pipeline crossings such as those at road and railroad rights of way. This standard provides an overview of prioritization strategies for management of external corrosion of piping in metallic cased crossings using ILI data integrated with construction, operating, maintenance and inspection information.
14.[标准] Consequences of Coating Failures as Related to Interaction with Cathodic Protection

与阴极保护相互作用相关的涂层失效后果

发布单位：
美国-美国防腐工程师协会(US-NACE)

标准状态：
现行

标准号：
NACE TR21447-2020

发布时间：
2020-09-22

中标分类：
-

国标分类：
-

实施时间：

摘要： The purpose of this NACE International technical report is to provide basic information regarding the mechanisms involved with cathodic protection (CP) shielding for external coatings applied to carbon steel pipelines, and the manner in which the breakdown of coating systems may or may not contribute to CP shielding. It is intended to be a basic reference from which the tendency of a coating system to fail and shield CP may be understood on a conceptual basis. Non-corrosion-related pipeline protection systems, including concrete weight coating, polyethylene encasement, insulation, and mechanical pipeline protection systems, are outside the scope of this report. End users of this report may include pipeline designers, corrosion engineers, integrity management specialists, regulators, CP service providers, coating suppliers, coating service providers, equipment suppliers, and pipeline/facility owners.
15.[标准] Standard Material Requirements - Metallic Materials for Sucker-Rod Pumps for Corrosive Oilfield Environments

标准材料要求.腐蚀性油田环境用有杆泵用金属材料

发布单位：
美国-美国防腐工程师协会(US-NACE)

标准状态：
现行

标准号：
NACE MR0176-2020

发布时间：
2020-08-27

中标分类：
-

国标分类：
-

实施时间：

摘要： This standard specifies metallic material requirements for the construction of sucker-rod pumps for service in corrosive oilfield environments. American Petroleum Institute (API) Spec 11AX provides dimension requirements that ensure the interchangeability of component parts. However, that document does not provide material specifications or guidelines for the proper application of various API pumps. API RP 11AR lists the general advantages and disadvantages of the various pump types and lists the acceptable materials for barrels and plungers; API RP 11BR and NACE SP0195 supplement API Spec 11AX by providing corrosion control methods using chemical treatment. This standard is intended for end users (e.g., production engineers) and equipment manufacturers to supplement the use of the aforementioned API and NACE publications.
16.[标准] Sacrificial Cathodic Protection of Reinforced Concrete Elements— A State-of-the-Art Report

暴露在大气中的现有钢筋混凝土结构腐蚀控制的维护和修复考虑

发布单位：
美国-美国防腐工程师协会(US-NACE)

标准状态：
现行

标准号：
NACE TR01105-2020

发布时间：
2020-08-19

中标分类：
-

国标分类：
-

实施时间：

摘要： This technical report presents state-of-the-art information on several commercially available galvanic cathodic protection/prevention systems for protecting atmospherically exposed reinforced concrete structures. The information contained in this report has been provided by key manufacturers of these systems and is intended as a technical resource for engineers responsible for the rehabilitation of reinforced concrete structures. It may also be useful to owners, contractors, and other practitioners related to the field of galvanic cathodic protection (CP). All information related to galvanic CP is intended for atmospherically exposed concrete structures and may not be applicable to concrete containing epoxy-coated reinforcing steel, galvanized, or other coated or nonferrous reinforcement.
17.[标准] Cathodic Protection Systems for the Mitigation of External Corrosion of Buried and Submerged Metallic Piping Systems at Nuclear Power Plants

缓解核电厂埋地和水下金属管道系统外部腐蚀的阴极保护系统

发布单位：
美国-美国防腐工程师协会(US-NACE)

标准状态：
现行

标准号：
NACE SP21434-2020

发布时间：
2020-03-05

中标分类：
-

国标分类：
-

实施时间：

摘要： This standard presents accepted methods and practices regarding the use of cathodic protection (CP) for the control of external corrosion on buried or submerged carbon steel, stainless steel, gray cast iron, ductile cast iron, copper, and aluminum piping systems at nuclear power plants. This standard may be useful at facilities other than nuclear power plants that contain complex networks of buried or submerged piping, which may be composed of more than one material and may or may not be grounded.This standard addresses the design of CP systems in nuclear power plants for new piping systems and existing coated and uncoated piping systems. For each type of system, information is provided concerning the effects of grounding of the piping system on the design of the CP system. It also introduces design concepts for new piping systems that will assist in the design, operation, testing, or maintenance of a CP system.This standard also presents accepted methods and practices for the installation, operation (including acceptance criteria), testing, and maintenance of CP systems in nuclear power plants. It presents criteria and procedures that may be used to determine the conditions under which a pipe or piping system need not be cathodically protected.
18.[标准] Transmission and distribution structure, above-grade corrosion, atmospherically exposed, steel transmission tower, distribution pole, substation structure, field inspection, TG 529.

输电和配电结构地上腐蚀大气暴露钢制输电塔配电杆变电站结构现场检查 TG 529

发布单位：
美国-美国防腐工程师协会(US-NACE)

标准状态：
现行

标准号：
NACE SP21459-2020/IEEE Std.2655-2018

发布时间：
2020-07-09

中标分类：
-

国标分类：
-

实施时间：

摘要： This standard is intended for use by electric utility personnel, contractors, inspectors, and those interested in the impact of corrosion on the above-grade sections of transmission, distribution, and substation steel structures. It provides requirements to:(1) help utilities identify structures that may be at a high risk for above-grade corrosion;(2) inspect the selected structures;(3) categorize the condition of structures based on corrosion degradation;(4) prioritize structures requiring additional inspection based on those findings; and(5) help identify next steps as required.This standard is limited to the inspection and assessment of steel transmission towers, poles, distribution poles, and substation structures, including galvanized and painted mild steel structures, as well as other similar structures.
19.[标准] Application of Tape Coatings for External Corrosion Protection of Buried Metal Pipelines

胶带涂料在埋地金属管道外防腐中的应用

发布单位：
美国-美国防腐工程师协会(US-NACE)

标准状态：
历史

标准号：
NACE SP0109-2019

发布时间：
2019-01-14

中标分类：
-

国标分类：
-

实施时间：

摘要： Revised in 2019!This Standard Practice provides the most current technology and industry practices for material requirements and the use of tape coatings for external mainline coating, coating repair, coating rehabilitation, and coating weld joints on buried metal pipelines.
20.[标准] Laboratory Screening Test to Determine the Ability of Scale Inhibitors to Prevent the Precipitation of Barium Sulfate or Strontium Sulfate, or Both, from Solution (for Oil and Gas Production Systems)

实验室筛选试验以确定阻垢剂防止硫酸钡或硫酸锶或二者从溶液中沉淀的能力（用于石油和天然气生产系统）

发布单位：
美国-美国防腐工程师协会(US-NACE)

标准状态：
历史

标准号：
NACE TM0197-2019

发布时间：
2019-06-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This standard describes a test method to screen scale inhibitors for their ability to prevent precipitation of BaSO4or SrSO4, or both, from oilfield brines. This standard test method is intended to provide the user with a relative and quantitative measure of the ability of scale inhibitors to prevent (1) the formation and (2) the precipitation of solid BaSO4or SrSO4, or both, which are necessary and critical stages in scale deposition. This standard is maintained by Task Group 383.