美国石油学会_国内外标准网文献检索下载

1.[标准] Addendum 1 to Laboratory Testing of Drilling Fluids, Ninth Edition

钻井液实验室测试附录1 第九版

发布单位：
美国-美国石油学会(US-API)

标准状态：
现行

标准号：
API RP 13I Addendum 1

发布时间：
2023-01-01

中标分类：
-

国标分类：
-

实施时间：
2.[标准] Testing of Heavy Brines, Sixth Edition

重盐水测试第六版

发布单位：
美国-美国石油学会(US-API)

标准状态：
现行

标准号：
API RP 13J

发布时间：
2023-01-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This standard covers the physical properties, potential contaminants, and test procedures for heavy brine fluids manufactured for use in oil and gas well drilling, completion, fracturing, and workover fluids.This standard provides methods for assessing the performance and physical characteristics of heavy brines for use in field operations. It includes procedures for evaluating the density or specific gravity, the clarity or amount of particulate matter carried in the brines, the crystallization point or the temperature at which the brines make the transition between liquid and solid at atmospheric pressure (a discussion of crystallization temperature under pressure is provided in Annex C), the pH, iron contamination, and buffering capacity.
3.[标准] Errata to Field Testing Water-based Drilling Fluids, Fifth Edition

水基钻井液现场测试勘误表第五版

发布单位：
美国-美国石油学会(US-API)

标准状态：
现行

标准号：
API RP 13B-1 Errata 3

发布时间：
2023-01-01

中标分类：
-

国标分类：
-

实施时间：
4.[标准] API Manual of Petroleum Measurement Standards Chapter 22.7, EI HM 77, Testing Protocol for Multiphase Meter, First Edition

API石油计量标准手册第22.7章 EI HM 77 多相流量计测试协议第一版

发布单位：
美国-美国石油学会(US-API)

标准状态：
现行

标准号：
API MPMS Chapter 22.7

发布时间：
2023-01-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This testing protocol provides the minimum requirements for documenting performance testing of an inline multiphase flow meter under controlled flowing conditions in a flow loop facility. Completion of the testing protocol is not a calibration and does not replace field testing and validation.This testing protocol documents the method for testing the performance characteristics of multiphase flow meters used in production allocation. The testing protocol includes a listing of parameters affecting the performance of the devices, a description of the tests required, requirements for the test facility, a data reporting format, and an uncertainty determination methodology.
5.[标准] Addendum 1 to Definition of Onshore Gas Gathering Lines, Second Edition

陆上集气管线定义附录1 第二版

发布单位：
美国-美国石油学会(US-API)

标准状态：
现行

标准号：
API RP 80 Addendum 1

发布时间：
2023-01-01

中标分类：
-

国标分类：
-

实施时间：
6.[标准] Measurement of Cargoes On Board Tank Vessels

油罐船上货物的测量

发布单位：
美国-美国石油学会(US-API)

标准状态：
现行

标准号：
API MPMS Chapter 17.2

发布时间：
2023-01-01

中标分类：
-

国标分类：
-

实施时间：

摘要： The determination of the quantity and quality of cargo on board marine tank vessels is frequently complex. It is necessary to accurately gauge, ascertain the temperature of, collect samples of, and calculate the amount of all materials contained in the vessel’s lines, cargo tanks, and slop tanks. Other spaces on the vessel may also contain cargo, such as ballast tanks, double bottoms, cofferdams, and numerous other nondesignated cargo spaces, all of which have to be checked, and any volumes contained in them calculated. Measurement accountability (quantity and quality) has to further take into account conditions such as, but not limited to, OBQ/ROB, line fullness, preloading tank inspection, closed measurement and sampling systems, and special procedures for chemical and gas cargoes. Reconciliation of the foregoing may be required if gains or losses exceed expected tolerances.The detailed requirements for performing all of these actions are contained in numerousMPMSstandards. This publication identifies the methods for performing these procedures on crude oils; petroleum products; chemical cargoes; LPG and LNG, normally carried on board marine tank vessels; and guides the user to the appropriate standard/guidance document within theMPMSsuite of standards
7.[标准] Errata 1 to Choke and Kill Equipment, Third Edition

节流和压井设备勘误表1 第三版

发布单位：
美国-美国石油学会(US-API)

标准状态：
现行

标准号：
API Spec 16C Errata 1

发布时间：
2022-07-01

中标分类：
-

国标分类：
-

实施时间：
8.[标准] S-N Fatigue Design Guidelines and Test Data for Low-alloy Steel Bolts

低合金钢螺栓的S-N疲劳设计指南和试验数据

发布单位：
美国-美国石油学会(US-API)

标准状态：
现行

标准号：
API TR 21TR2

发布时间：
2022-03-01

中标分类：
-

国标分类：
-

实施时间：

摘要： New API-backed research on the fatigue life of bolts used in underwater natural gas and oil infrastructure-including critical blowout prevention equipment-resulted in the publication of this technical report, a key advancement in industry's continued efforts to protect workers and the environment from potential problems associated with bolting fatigue in subsea structures.The test program detailed in this technical report was developed to obtain bolting material fatigue data required to perform design verification analysis of fatigue-sensitive bolts to assure accurate design life estimation. The bolting fatigue testing program provided S-N fatigue curves for three alternating stress ranges in air and saltwater with cathodic protection (CP) and for bolt sizes of 1 in., 2 in. (Grade L7), and 3 in. (Grade L43). S-N curves are used to determine the number of cycles (N) required to test a product to failure at a given stress (S).The results of these S-N fatigue tests allow the bolting design to be assessed for this type of fatigue through structural analysis using the nominal root area stresses in the bolt, avoiding the need to define stress and load concentrations in the bolt root radius of engaged threads.The design guidelines and the fatigue data provided in the document are intended to be used for bolting with unified national thread with root radius (UNR) specifications of ASME B1.1 class 2A/2B and is important information for safe design and operation of offshore bolting.
9.[标准] Heat Recovery Systems, First Edition

热回收系统第一版

发布单位：
美国-美国石油学会(US-API)

标准状态：
现行

标准号：
API RP 669

发布时间：
2022-06-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This recommended practice (RP) provides guidelines for heat transfer equipment used in waste heat recovery systems in the petroleum, petrochemical and natural gas industries. Details of related equipment designs are included only where these are necessary to ensure proper design and operation and safe interaction with the heat recovery system. It indicates areas that need attention and offers information and descriptions of various types of heat transfer equipment available to aid in the selection of the appropriate heat recovery system.This RP does not include detailed requirements for:- process to process heat recovery systems,- gas turbine exhaust heat recovery,- CO boilers, or- convection sections used within fired heaters.The waste heat recovery systems included in this RP are typical of those currently in use and should not limit the use of alternate systems.Instrumentation and controls for waste heat recovery systems are sometimes mentioned but is not meant to completely define all requirements. Other standards and documents, such as API RP 556, Instrumentation, Control, and Protective Systems for Fired Heaters, should be used to fully define the needed instruments and controls.
10.[标准] Recommended Practice for Care and Use of Fiberglass Tubulars, Third Edition

玻璃纤维管的维护和使用推荐规程第三版

发布单位：
美国-美国石油学会(US-API)

标准状态：
现行

标准号：
API RP 15TL4

发布时间：
2022-10-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This recommended practice provides information on packing, transporting, handling, storing, inspecting, and installing fiberglass tubulars in oilfield usage.Trouble-free service and maximum safety should result if this recommended practice is followed. Fiberglass tubulars differ in properties from metallic tubular goods, and different installation techniques are required.
11.[标准] Recommended Practice for Pipeline SCADA Displays, Second Edition

管道SCADA显示推荐规程第二版

发布单位：
美国-美国石油学会(US-API)

标准状态：
现行

标准号：
API RP 1165

发布时间：
2022-12-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This recommended practice (RP) focuses on the design and implementation of displays used for the display, monitoring, and control of information on pipeline supervisory control and data acquisition (SCADA) systems. The primary purpose is to promote the success of the controller to safely operate pipeline systems and to document industry practices that provide guidance to a pipeline company or operator who wants to select a new SCADA system, or update or expand an existing SCADA system, and for guidance throughout the SCADA system display lifecycle.The pipeline industry and stakeholders have determined that well-designed displays can contribute to safe operations and prevent or mitigate pipeline incidents. Using established human factors considerations in display design can promote the safety performance of a pipeline operator.
12.[标准] Inspection, Assessment, and Repair of Heavy Wall Reactor Vessels in High-temperature High-pressure Hydrogen Service, First Edition

高温高压氢气设施中厚壁反应堆容器的检查、评估和维修第一版

发布单位：
美国-美国石油学会(US-API)

标准状态：
现行

标准号：
API TR 934-H

发布时间：
2022-05-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This TR documents guidance for the inspection, assessment, and repair of heavy wall reactor vessels (nominally considered a wall thickness of 50 mm (2 in.) and greater) in high-pressure hydrogen service operating at temperatures below 455 °C (850 °F). It provides industry practices dealing with reactor vessels after construction and exposure to operating conditions. It focuses on reactor vessels fabricated from 2¿Cr-1Mo, 3Cr-1Mo, 2¿Cr-1Mo-¿V, and 3Cr-1Mo-¿V steels. It also offers some guidance for heavy wall reactor vessels fabricated from 1Cr-¿Mo and 1¿Cr-¿Mo steels, but specifically does not pertain to C-¿Mo steel vessels. However, guidance included in this document can be used for C-¿Mo steel reactor vessels at the owner's discretion and with modifications as appropriate.This document does not address damage found in hot wall catalytic reforming reactors, fluid catalytic cracking unit (FCCU) reactors, and delayed coking drums as they generally operate at higher temperatures and have thinner walls.Since this is a technical report, it does not provide recommendations, but instead presents industry experience with case histories of repairs and recognized practices, much of which was documented as part of a Joint Industry Program (JIP) on Aging Reactor Vessels, conducted in two phases between 1995 and 2004.
13.[标准] Hazardous Liquid Pipeline Facilities Integrity Management, First Edition

危险液体管道设施完整性管理第一版

发布单位：
美国-美国石油学会(US-API)

标准状态：
现行

标准号：
API RP 1188

发布时间：
2022-01-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This recommended practice (RP) covers the integrity management of hazardous liquid pipeline facilities. This RP provides guidance on:- high-consequence area impact determinations;- data integration;- threat identification;- risk assessment;- inspection and reinspection;- preventive and mitigative measures (P&MM);- performance measures.Facilities include terminal and pipeline station piping systems within terminal and pipeline facility boundaries and includes off-plot piping. Off-plot piping includes, but is not limited to, piping between facilities, piping that comes from or goes to a refinery or other type facility, or piping that may cross a road, ditch, or other property outside the confines of a terminal facility. This RP covers the integrity management of all pressure-containing components directly used in the transport or storage of hazardous liquids within a liquids pipeline facility. Piping for transportation of hazardous liquids, such as but not limited to crude oil, highly volatile liquids (HVLs), gasoline, diesel, biofuels, lubricating oils, jet fuel, and aviation fuel are covered by the scope of this document.This RP does not apply to refinery piping, sanitary waste piping, cast iron piping, or nonmetallic gravity flow piping systems. Tanks are considered and reviewed as part of the high-consequence area analysis and risk assessment. For guidance on the inspection and maintenance of tanks, refer to API Std 653 or API Std 2610.This RP builds on concepts developed in API RP 1160, Managing System Integrity for Hazardous Liquid Pipelines, and outlines a Plan-Do-Check-Act cycle to carry out continuous assessment and improvement for a pipeline facility integrity program. This approach is considered Best in Class and is used to drive continuous operational improvement as in other API standards such as API RP 1173, Pipeline Safety Management Systems. Additional guidance is available in documents such as API 570, Piping Inspection Code: In-service Inspection, Rating, Repair, and Alteration of Piping Systems, and API Std 2610, Design, Construction, Operation, Maintenance, and Inspection of Terminal and Tank Facilities.
14.[标准] Specification for Rotating Control Devices, Third Edition, Includes Addendum 1 (2022), Addendum 2 (2023), and Errata 1 (2022)

旋转控制装置规范

发布单位：
美国-美国石油学会(US-API)

标准状态：
现行

标准号：
API Spec 16RCD

发布时间：
2022-05-31

中标分类：
-

国标分类：
-

实施时间：

摘要： This document is formulated to provide for the availability of safe and functionally interchangeable rotating control devices (RCDs) utilized in air drilling, drilling operations for oil and gas, and in geothermal drilling operations.Technical content provides requirements for design, performance, materials, tests and inspection, welding, marking, handling, storing, and shipping. This specification does not apply to field use or field testing of RCDs.Critical components are those parts having requirements specified in this document.
15.[标准] Safe Welding, Cutting, and Hot Work Practices in the Petroleum and Petrochemical Industries, Eighth Edition

石油和石化行业的安全焊接、切割和动火作业规程第八版

发布单位：
美国-美国石油学会(US-API)

标准状态：
现行

标准号：
API RP 2009

发布时间：
2022-03-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This recommended practice provides information to assist in the safe performance of welding, cutting, and other hot work activities to be done safely in petroleum and petrochemical operations. The understanding of potential hazards, and application of this knowledge, can help reduce the probability and severity of incidents and the risk of harmful health effects from those activities.Personnel engaged in hot work should have a comprehensive understanding of the potential hazards associated with the activity and materials involved. RP 2009 was updated to include added precautions to prevent fires and incidents during welding operations, as well as an awareness of the hazards of inhalation of welding fumes. Additionally, it includes specific guidance to evaluate procedures for certain types of work equipment in service, supports UN Sustainable Development Goal #9 for Resilient Infrastructure, and is included in the U.S. Department of Labor OSHA's resources materials for Process Safety Management.
16.[标准] Configuration and Operation for Subsea Well Intervention Systems, First Edition

海底油井干预系统的配置和操作第一版

发布单位：
美国-美国石油学会(US-API)

标准状态：
现行

标准号：
API RP 17G1

发布时间：
2022-07-01

中标分类：
-

国标分类：
-

实施时间：

摘要： API Recommended Practice (RP) 17G1 provides guidance for the selection of a subsea well intervention system, defines minimum requirements of a subsea well intervention system for specific operation(s) and environments to ensure the selected system is fit for purpose. This RP applies to new and existing subsea well intervention systems irrespective of whether the equipment complies with the latest requirements of API 17G.All subsea well intervention systems are covered by this RP and the equipment typically included in (but not limited to) the system is described in the suite of API 17G intervention documents.
17.[标准] Qualification of Distributors of Metallic Materials for Use in the Petroleum and Natural Gas Industries, Second Edition

石油和天然气工业用金属材料分销商资格认证第二版

发布单位：
美国-美国石油学会(US-API)

标准状态：
现行

标准号：
API Std 20J

发布时间：
2022-04-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This standard specifies requirements for the qualification of distributors of metallic materials used in the petroleum and natural gas industries. This standard is applicable to distributors of metallic bar, plate, and tubular products where API product standards require such services or are otherwise specified as a requirement for conformance.
18.[标准] Addendum 1 (2022) to Coiled Tubing Well Control Equipment Systems, Second Edition, Includes

连续油管井控设备系统附录1（2022）第二版包括

发布单位：
美国-美国石油学会(US-API)

标准状态：
现行

标准号：
API RP 16ST Addendum 1

发布时间：
2022-02-01

中标分类：
-

国标分类：
-

实施时间：
19.[标准] Specification for Polyethylene Line Pipe (PE), Fifth Edition

聚乙烯管线管（PE）规范第五版

发布单位：
美国-美国石油学会(US-API)

标准状态：
现行

标准号：
API Spec 15LE

发布时间：
2022-09-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This specification covers polyethylene line pipe (PE) utilized for the production and transportation of oil, gas, mixed-phase fluids, and non-potable water. The piping is intended for use in new construction, insertion renewal, line extension, and repair of both aboveground and buried pipe applications.
20.[标准] Use of Duplex Stainless Steels in Hydroprocessing Reactor Effluent Air Coolers (REACs)

双相不锈钢在加氢处理反应器流出物空气冷却器（REAC）中的应用

发布单位：
美国-美国石油学会(US-API)

标准状态：
现行

标准号：
API TR 932-C

发布时间：
2022-08-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This technical report covers results of a survey of the petroleum refining industry concerning the use of duplex stainless steel (DSS) in hydroprocessing reactor effluent air cooler (REAC) systems. The API Committee on Refining Equipment Subcommittee on Corrosion and Materials (SCCM) commissioned this survey after several industry reports of weldment cracking failures with DSS REAC system components, including REAC header boxes, tube-to-tubesheet welds, and associated piping. REAC component weldment cracking has been addressed in SCCM documents, including API Recommended Practice 932-B and API Technical Report 938-C, in published conference papers, and in a report issued by the Materials Technology Institute (MTI).Survey results and information from prior studies are used to summarize the weldment cracking issue and to prepare an approach for assessing the likelihood for in-service weldment cracking of DSS REAC system components.