美国混凝土学会_国内外标准网文献检索下载

1.[标准] Concrete Shell Structures - Guide

混凝土壳体结构.指南

发布单位：
美国-美国混凝土学会(US-ACI)

标准状态：
现行

标准号：
ACI PRC-334.1-22

发布时间：
2022-06-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This guide discusses the practical aspects of shell design, including recommendations for designers of thin concrete shells. General guidance based on current practice is given on analysis, proportioning, reinforcing, and construction. A selected bibliography on analytical methods, featuring design tables and aids, is included to assist the engineer.
2.[标准] Type ES (Epoxy Slurry) Polymer Overlay for Bridge and Parking Garage Decks-Specification (SI Units)

桥梁和停车场桥面用ES型（环氧泥浆）聚合物覆盖层规范（国际单位制）

发布单位：
美国-美国混凝土学会(US-ACI)

标准状态：
现行

标准号：
ACI SPEC-548.9M-21

发布时间：
2022-07-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This Specification covers epoxy slurry (ES) polymer overlay for bridge and parking garage decks. Type ES polymer overlay incorporates a low-modulus epoxy binder, fillers, and selected aggregate to produce a flexible, skid-resistant, and low-permeability overlay. The overlay may be used for both new construction and rehabilitation of existing structures. The overlay is placed by applying the mixed epoxy binder and filler to the surface and broadcasting aggregate. This Specification includes requirements for epoxy resin, fillers, aggregates, storage and handling, surface preparation, surface profile, mixing, placement, quality control, and quality assurance.
3.[标准] Structural Health Monitoring Technologies for Concrete Structures - Report

混凝土结构的结构健康监测技术.报告

发布单位：
美国-美国混凝土学会(US-ACI)

标准状态：
现行

标准号：
ACI PRC-444.2-21

发布时间：
2021-06-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This report gives an overview of structural health monitoring (SHM) technologies for concrete structures. Data processing, analysis, and interpretation are not addressed in this document.
4.[标准] In-Place Density Testing of Freshly Placed Roller-Compacted Concrete by Nuclear Gauge Testing -TechNote

通过核规试验对新浇筑的碾压混凝土进行现场密度试验.技术说明

发布单位：
美国-美国混凝土学会(US-ACI)

标准状态：
现行

标准号：
ACI PRC-327.1-21

发布时间：
2021-10-01

中标分类：
-

国标分类：
-

实施时间：

摘要： What is the proper procedure for determining the in-place density of fresh roller-compacted concrete (RCC) according to ASTM C1040/C1040M, Standard Test Methods for In-Place Density of Unhardened and Hardened Concrete, Including Roller Compacted Concrete, By Nuclear Methods
5.[标准] Offshore and Marine Concrete Structures: Past, Present, and Future (The Concrete Convention and Exposition, March 24-28 Quebec City, Quebec, Canada)

海上和海上混凝土结构:过去、现在和未来（3月24日至28日加拿大魁北克魁北克市混凝土会议和博览会）

发布单位：
美国-美国混凝土学会(US-ACI)

标准状态：
现行

标准号：
ACI SP-337

发布时间：
2020-02-01

中标分类：
-

国标分类：
-

实施时间：

摘要： Offshore and marine concrete structures have not received enough attention in the recent past, at least in the United States. The complexity and safety concerns associated with these structures are such that they probably need more attention compared to many other types of concrete structures. Also, offshore and marine concrete structures are so global in nature that there is a higher need for better coordination and synchronization of design, construction, inspection, and maintenance practices in different parts of the world.A two-part session, titled "Offshore and Marine Concrete Structures: Past, Present, and Future," was held at the Spring 2019 ACI Concrete Convention and Exposition on March 24-28 in Quebec City, Quebec, Canada. The session, sponsored by ACI Committee 357, Offshore and Marine Concrete Structures, highlighted accomplishments of the past, current state-of-the-practice, and a path for the future. This ACI Special Publication (SP) is a compilation of select papers presented at the session. The efforts of all the reviewers in assuring the quality of this publication is greatly acknowledged.
6.[标准] Qualification of Post-Installed Adhesive Anchors in Concrete and Commentary

混凝土中后安装粘结锚的鉴定和评论

发布单位：
美国-美国混凝土学会(US-ACI)

标准状态：
现行

标准号：
ACI 355.4-19(R2021)

发布时间：
2020-01-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This standard prescribes testing programs and evaluation requirements for post-installed adhesive anchors intended for use in concrete under the design provisions of ACI 318. Testing and assessment criteria are provided for various conditions of use, including seismic loading; sustained loading; aggressive environments; reduced and elevated temperatures; and for determining whether anchors are acceptable for use in uncracked concrete only, or acceptable for service both in cracked and uncracked concrete. Criteria are provided for establishing the characteristic bond strength, reductions for adverse conditions, and the anchor category and associated job-site quality control requirements.
7.[标准] Guide for Design and Construction Responsibilities for Architectural Precast Concrete

建筑预制混凝土的设计和施工责任指南

发布单位：
美国-美国混凝土学会(US-ACI)

标准状态：
现行

标准号：
ACI 533.1R-20

发布时间：
2020-04-01

中标分类：
-

国标分类：
-

实施时间：

摘要： Architectural precast concrete is a subcategory of concrete construction that involves the same basic entities as other concrete construction, but is cast in a plant and has a more decorative appeal by using color, texture, distinguished surface finishes, or all of these. This document outlines the responsibilities for various parties of the design/construction team for architectural precast concrete projects and does not necessarily apply to concrete or precast concrete in general.
8.[标准] Code Requirements for Residential Concrete (ACI 332-20) and Commentary

《住宅混凝土规范要求》（ACI 332-20）及注释

发布单位：
美国-美国混凝土学会(US-ACI)

标准状态：
现行

标准号：
ACI 332-20

发布时间：
2020-10-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This code covers the design and construction of cast-in-place concrete for one- and two-family dwellings and multiple single-family dwellings (townhouses), and their accessory structures. Among the subjects covered are the design and construction requirements for plain and reinforced concrete footings; foundation walls; slabs-on-ground; and requirements for concrete, reinforcement, forms, and other related materials. The quality and testing of materials discussed in this document are covered by reference to the appropriate ASTM standards.This code is written to allow for reference by adoption in a general building code without changing its language. Background details or suggestions for carrying out the requirements or intent of the code are provided in the commentary. The commentary discusses some of the considerations of the committee in developing the code with emphasis given to the explanation of provisions that may be unfamiliar to code users or where significant departure exists from other concrete codes.Keywords:admixtures; aggregate; backfill; cement; compressive strength; cover; flexural strength; footings; formwork (construction); foundations; loads (forces); slabs; structural analysis; reinforcement.
9.[标准] Guide for the Evaluation of Shotcrete

喷射混凝土评估指南

发布单位：
美国-美国混凝土学会(US-ACI)

标准状态：
现行

标准号：
ACI 506.4R-19

发布时间：
2019-07-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This document provides information on the evaluation of both dry-mix and wet-mix shotcrete. It is assumed throughout the document that shotcrete is a method of placing concrete. However, for the sake of readability, the word "shotcrete" is often used either to identify the shotcrete process (method) or the shotcrete mixture (product) in the present document.Evaluation of in-place shotcrete requires experience, education, and engineering judgment. This document serves as a guide for engineers, inspectors, contractors, and others involved in accepting, rejecting, or evaluating in-place dry- or wet-mix shotcrete.
10.[标准] Guide to Strength Evaluation of Existing Concrete

现有混凝土强度评估指南

发布单位：
美国-美国混凝土学会(US-ACI)

标准状态：
现行

标准号：
ACI 437R-19

发布时间：
2019-05-01

中标分类：
-

国标分类：
-

实施时间：

摘要： The strength of existing concrete buildings and structures can be evaluated analytically and supplemented where necessary with load testing. The recommendations in this report indicate when such an evaluation may be needed, establish criteria for selecting the evaluation method, and indicate the data and background information necessary for an evaluation. Methods of determining material properties used in the analytical and load test investigations are described in detail. Analytical investigations should follow the principles of strength design. Working stress analysis can supplement the analytical investigations by relating the actual state of stress in structural components to the observed conditions.
11.[标准] Advances in Concrete Bridges: Design, Construction, Evaluation, and Rehabilitation (The Concrete Convention and Exposition, March 25-29, 2018, Salt Lake City, UT, USA)

混凝土桥梁的进展:设计、施工、评估和修复（混凝土大会和博览会 2018年3月25日至29日美国犹他州盐湖城）

发布单位：
美国-美国混凝土学会(US-ACI)

标准状态：
现行

标准号：
ACI SP-333

发布时间：
2019-10-01

中标分类：
-

国标分类：
-

实施时间：

摘要： Concrete bridges play an important role in the efficiency and reliability of transportation civil infrastructure. Significant advancements have been made over the last decades to enhance the performance and durability of bridge elements at affordable costs. From an application perspective, novel analysis techniques and construction methods are particularly notable, which have led to the realization of more sustainable built-environments. As far as the evaluation and rehabilitation of constructed bridges are concerned, new nondestructive testing approaches provide accurate diagnosis and advanced composites, such as carbon fiber reinforced polymer (CFRP), have become an alternative to conventional materials. This Special Publication (SP) contains nine papers selected from two technical sessions held at The ACI Concrete Convention and Exposition – Spring 2018, in Salt Lake City, UT. The objective of the SP is to present technical contributions aimed to understand the state of the art of concrete bridges, identify and discuss challenges, and suggest effective solutions for both practitioners and government engineers. All manuscripts were reviewed in accordance with the ACI publication policy. The Editors wish to thank all contributing authors and reviewers for their rigorous efforts. The Editors also gratefully acknowledge Ms. Barbara Coleman at ACI for her knowledgeable guidance in the development of the SP.
12.[标准] Guide to Design with Fiber-Reinforced Concrete

纤维增强混凝土设计指南

发布单位：
美国-美国混凝土学会(US-ACI)

标准状态：
现行

标准号：
ACI 544.4R-18

发布时间：
2018-07-01

中标分类：
-

国标分类：
-

实施时间：

摘要： New developments in materials technology and the addition of field experience to the engineering knowledge base have expanded the applications of fiber-reinforced concrete (FRC). Fibers are made with different materials and can provide different levels of tensile/flexural capacity for a concrete section, depending on the type, dosage, and geometry. This guide provides practicing engineers with simple, yet appropriate, design guidelines for FRC in structural and nonstructural applications. Standard tests are used for characterizing the performance of FRC and the results are used for design purposes, including flexure, shear, and crack-width control. Specific applications of fiber reinforcement have been discussed in this document, including slabs-on-ground, composite slabs-on-metal decks, pile-supported ground slabs, precast units, shotcrete, and hybrid reinforcement (reinforcing bar plus fibers).
13.[标准] Superplasticizers and Other Chemical Admixtures in Concrete Proceedings Twelfth International Conference Beijing, China October 28-31, 2018

混凝土中的高效减水剂和其他化学外加剂会议录第十二届国际会议中国北京 2018年10月28日至31日

发布单位：
美国-美国混凝土学会(US-ACI)

标准状态：
现行

标准号：
ACI SP-329

发布时间：
2018-10-01

中标分类：
-

国标分类：
-

实施时间：

摘要： In October 28-31, 2018, the Chinese Ceramic Society and the China Academy of Building Research (CABR), Beijing China, in association with ACI, sponsored the Twelfth International Conference on Superplasticizers and other Chemical Admixtures in Concrete in Beijing China.More than 80 papers from all over the world were received and peer reviewed. A total of 36 refereed papers were accepted for publication in the proceedings of the conference. The proceedings were published by the ACI as SP 329. Also, 54 additional papers were presented at the conference, and were published in the Supplementary Papers Volume. The organizers of the conference were the Chinese Ceramic Society, Beijing and the Committee for the Organization of International Conferences (formerly CANMET/ACI Conferences).
14.[标准] Report on the Erosion of Concrete in Hydraulic Structures

水工建筑物混凝土侵蚀报告

发布单位：
美国-美国混凝土学会(US-ACI)

标准状态：
现行

标准号：
ACI 207.6R-17

发布时间：
2017-09-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This report outlines the causes, control, maintenance, and repair of erosion in hydraulic structures. Such erosion occurs from three major causes: cavitation, abrasion, and chemical attack. Design parameters, materials selection and quality, environmental factors, and other issues affecting the performance of concrete are discussed.Evidence exists to suggest that, given the operating characteristics and conditions to which a hydraulic structure will be subjected, the concrete can be designed to mitigate future erosion. However, when operational factors change or are not clearly known and erosion of concrete surfaces occurs, repairs should follow. This report addresses the subject of concrete erosion, inspection techniques, and repair strategies, providing references to a more detailed treatment of the subject.
15.[标准] Report on Service-Life Prediction

使用寿命预测报告

发布单位：
美国-美国混凝土学会(US-ACI)

标准状态：
现行

标准号：
ACI 365.1R-17

发布时间：
2017-09-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This report presents information to the owner and design professional on the service life prediction of new and existing concrete structures. Key factors controlling the service life of concrete and methodologies for evaluating the condition of the existing concrete structures, including definitions of key physical properties, are also presented. This report assists in the application of available methods and tools to predict the service life of existing structures and provides procedures that can be taken at the design and construction stage to increase the service life of new structures. Techniques for predicting the service life of concrete and the relationship between economics and the service life of structures are discussed. Examples provided discuss which service life techniques are applied to concrete structures or structural components. Needed developments to improve the reliability of service life predictions are also identified.
16.[标准] Reduction of Crack Width with Fiber

用纤维减小裂纹宽度

发布单位：
美国-美国混凝土学会(US-ACI)

标准状态：
现行

标准号：
ACI SP-319

发布时间：
2017-05-31

中标分类：
-

国标分类：
-

实施时间：

摘要： Fiber reinforcement is the most effective way of improving the resistance of concrete to cracking, but little is known of the extent of the reduction of crack width with fiber.The papers included in this special publication discuss the role of fiber reinforcement in reduction of crack width and lay the foundation for Life Cycle Engineering Analysis with fiber reinforced concrete.Recognizing the reduction of crack width with fibers in cement-based materials, ACI Committee 544 Fiber Reinforced Concrete, together with 544F Fiber Reinforced Concrete Durability and Physical Properties sponsored two technical sessions entitled Reduction of crack width with fiber at the Fall 2016 ACI Convention in Philadelphia. Papers were presented by invited international experts from Belgium, France, Germany, Italy, Portugal, United Arab Emirates and the United States of America.This Symposium Publication (SP) contains eleven papers which provide insight on the state of the art of the topic in the academia, in the industry and in real life applications. The topics of the papers cover the reduction of crack widths in steel reinforced concrete bridge decks with fiber, 15 years of applying SFRC for crack control in design from theory to practice, the effectiveness of macro synthetic fibers to control cracking in composite metal decks, conventional and unconventional approaches for the evaluation of crack width in fiber reinforced concrete (FRC) structures, reduction of water inflow by controlling cracks in tunnel linings using fiber reinforcement, a review of Engineering Cementitious Composites (ECC) for improved crack-width control of FRC beams, tailoring a new restrained shrinkage test for fiber reinforced concrete, a model to predict the crack width of FRC members reinforced with longitudinal bars, a probabilistic explicit cracking model for analyzing the cracking process of FRC structures, toughening of cement composites with wollastonite sub micro-fibers and self healing of FRC: a new value of "crack width" based design. The papers included in this publication have been peer reviewed by international experts in the field according to the guidelines established by the American Concrete Institute.
17.[标准] Guide for the Analysis, Design, and Construction of Elevated Concrete and Composite Steel - Concrete Water Storage Tanks

高架混凝土和复合钢混凝土储水箱的分析、设计和施工指南

发布单位：
美国-美国混凝土学会(US-ACI)

标准状态：
现行

标准号：
ACI 371R-16

发布时间：
2016-06-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This guide presents recommendations for materials, analysis, design, and construction of concrete-pedestal elevated water storage tanks, including all-concrete and composite tanks. Composite tanks consist of a steel water storage vessel supported on a cylindrical reinforced concrete pedestal.Concrete-pedestal elevated water storage tanks are structures that present special problems not encountered in typical environmental engineering concrete structures. This guide refers to ACI 350 for design and construction of those components of the pedestal tank in contact with the stored water, and to ACI 318 for design and construction of components not in contact with the stored water. Determination of snow, wind, and seismic loads based on ASCE/SEI 7 is included. These loads conform to the requirements of national building codes that use ASCE/SEI 7 as the basis for environmental loads as well as those of local building codes. Special requirements, based on successful experience, for the unique aspects of loads, analysis, design, and construction of concrete-pedestal tanks are presented.
18.[标准] Guide to Quality Management Auditing in the Concrete

混凝土行业质量管理审核指南

发布单位：
美国-美国混凝土学会(US-ACI)

标准状态：
现行

标准号：
ACI 121.1R-16

发布时间：
2016-11-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This guide provides the background and methods for conducting an audit of an organization's quality management system. Such an audit can assess the organization's commitment to quality management and conformance to standards, codes, and contract requirements. Audits can also identify portions of the quality management system that need correction or improvement.
19.[标准] Guide to Simplified Design for Reinforced Concrete Buildings - Spanish Language Version

钢筋混凝土建筑简化设计指南.西班牙语版

发布单位：
美国-美国混凝土学会(US-ACI)

标准状态：
现行

标准号：
ACI 314RS-16

发布时间：
2016-09-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This guide presents simplified methods and design techniques that facilitate and speed the engineering of low-rise buildings within certain limitations. Material is presented in an order that follows typical design process with procedures introduced as the designer will need them in the course of a building design. Much of the information presented in this guide is derived from ACI 318, ASCE 7, and the 2015 International Building Code (IBC) (International Code Council 2015). The quality and testing of materials used in construction are covered by references to the appropriate ASTM standard specifications.Whereas many of the tables, charts, and values included in this guide originated from the aforementioned reference documents, they have been modified or reorganized to be more conservative, to match design process flow, or better support the holistic and simplified design approach presented.Although this guide is not written in mandatory language, the information is presented in such a manner that a structure designed following this guide will, in principle, comply with the codes and standards on which it was based. Although this guide is written in nonmandatory language, it is meant to be applied as a whole, because the simplified provisions are interdependent, and it would be unsafe to employ only a portion of this guide and disregard the remainder. This guide is not a code and is not deemed to satisfy ACI 318, ASCE 7, and the International Building Code (International Code Council 2015). This guide is expected to be especially useful in the education and training of engineers in reinforced concrete design of low-rise structures of small to medium floor areas.There are many options within these standards that are not considered in this guide, such as the use of supplementary cementitious materials in concrete mixtures. As this guide will be used as a design aid, it is the licensed design professional?s responsibility to ensure that the structure design satisfies the requirements of ACI 318, ASCE 7, the International Building Code (International Code Council 2015), and the legal requirements of the local jurisdiction. The original draft of the guide, published as ACI IPS-1 (2002), was produced by a Joint Committee of Instituto Colombiano de Normas Técnicas y Certificación (Colombian Institute for Technical Standards and Certification) (ICONTEC) and Asociación Colombiana de Ingenieria Sismica (Colombian Association for Earthquake Engineering) (AIS).The initial drafting of ACI IPS-1 (2002) was motivated by frequent worldwide discussions that reinforced concrete codes might be unnecessarily sophisticated for some applications, such as small low-rise buildings. Current knowledge of reinforced concrete behavior obtained through experimentation and experience, and its status and dissemination as a structural material used worldwide, made developing a simplified design and construction guide feasible. This guide used ACI IPS-1 (2002) as a basis, with information derived from ACI 318, ASCE 7, and the International Building Code (International Code Council 2015).This guide presents simplified approaches to assist engineers in designing low-rise buildings within certain limitations, in addition to the following:(a) Information on the order needed in the course of a design(b) Explanatory material at appropriate places(c) Computations only requiring a hand calculator(d) Graphs and graphical explanations(e) Design information based on simplified strength models(f) Other limit states accounted for by minimum dimensions(g) Conservative loads and simplified analysis guidelines(h) Simplified geotechnical information to help define soil-bearing capacity(i) Shear walls as the seismic-force-resisting system(j) Material and construction guidelines based on commonly available steel grades and medium-strength concrete that can be site mixed.
20.[标准] Suggested Analysis and Design Procedures for Combined Footings and Mats - Spanish Language

组合基脚和垫子的建议分析和设计程序-西班牙语

发布单位：
美国-美国混凝土学会(US-ACI)

标准状态：
现行

标准号：
ACI 336.2RS-88

发布时间：
2015-05-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This report deals with the design of foundations carrying more than a single column of wall load. These foundations are called combined footings and mats. Although it is primarily concerned with the structural aspects of the design, considerations of soil mechanics cannot be eliminated and the designer should focus on the important interrelation of the two fields in connection with the design of such structural elements. This report is limited to vertical effects of all loading conditions. The report excludes on grade.