美国压缩气体协会_国内外标准网文献检索下载

1.[标准] CGA Position Statement on Use of Tapered and Parallel (Straight) Threads in Aluminum Alloy Cylinders

CGA关于在铝合金气缸中使用锥形和平行（直）螺纹的立场声明

发布单位：
美国-美国压缩气体协会(US-CGA)

标准状态：
现行

标准号：
CGA PS-24

发布时间：
2022-01-12

中标分类：
-

国标分类：
-

实施时间：

摘要： This position statement provides a comparison between tapered and parallel (straight) threads for use in aluminum alloy cylinders.
2.[标准] Standard for Portable Liquid Nitrogen Pumper Systems

便携式液氮泵系统标准

发布单位：
美国-美国压缩气体协会(US-CGA)

标准状态：
现行

标准号：
CGA P-92

发布时间：
2022-07-06

中标分类：
-

国标分类：
-

实施时间：

摘要： This standard contains minimum requirements for siting, selecting equipment for, installing, filling, starting up, operating, maintaining, and removing portable liquid nitrogen pumper systems, referred to as pumper systems in this publication.
3.[标准] Standard for Automatic Trailer Fill Compliance to 21 CFR Part 11 and PIC/S Annex 11 Requirements

符合21 CFR第11部分和PIC/S附录11要求的自动拖车填充标准

发布单位：
美国-美国压缩气体协会(US-CGA)

标准状态：
现行

标准号：
CGA M-17

发布时间：
2022-02-23

中标分类：
-

国标分类：
-

实施时间：

摘要： This publication applies to ATF systems and records, including trailers, microbulk vessels, railcars, and ISO containers at bulk medical gas and bulk food gas manufacturing facilities.In addition to the guidance in this publication, see CGA M-27, Guideline for Complying with Data Integrity Regulatory Expectations, for more information on compliance with data integrity requirements for ATF systems [3].This publication does not cover the filling of compressed gas cylinders or small cryogenic containers.
4.[标准] Standard for Food, Drug, and Medical Device Gas and Gas Equipment Manufacturers on Electronic Records and Signatures

食品、药品和医疗器械气体和气体设备制造商电子记录和签名标准

发布单位：
美国-美国压缩气体协会(US-CGA)

标准状态：
现行

标准号：
CGA M-16

发布时间：
2022-02-23

中标分类：
-

国标分类：
-

实施时间：

摘要： This publication is based on FDA's August 2003 Guidance for Industry Part 11, Electronic Records; Electronic Signatures--Scope and Application and satisfies the criteria of 21 CFR Part 11, § 11.1 (a) "The regulations in this part set forth the criteria under which the agency considers electronic records, electronic signatures, and handwritten signatures executed to electronic records to be trustworthy, reliable, and generally equivalent to paper records and handwritten signatures executed on paper".This guideline also harmonizes with PIC/S Guide for good manufacturing practice for medicinal products, Annex 11 "Computerised Systems" (as adopted in Canada).
5.[标准] Plant Integrity Management

工厂完整性管理

发布单位：
美国-美国压缩气体协会(US-CGA)

标准状态：
现行

标准号：
CGA P-91

发布时间：
2021-07-14

中标分类：
-

国标分类：
-

实施时间：

摘要： This publication gives general guidance on integrity management of process plants including, but not limited to, air separation plants, HYCO plants, cylinder filling plants, and carbon dioxide, acetylene, and nitrous oxide plants. The goal is to keep hazardous fluids and energy contained in order to maintain safe working conditions for personnel and prevent unacceptable environmental releases. The information contained in this publication applies to both new and existing equipment. Integrity management starts when the equipment is first put into service and continues throughout its lifecycle.
6.[标准] Standard for Low Pressure Pipeline Station Outlet/Regulator Inlet Connections, Fifth Edition

低压管道站出口/调节器进口连接标准第五版

发布单位：
美国-美国压缩气体协会(US-CGA)

标准状态：
现行

标准号：
CGA E-3

发布时间：
2021-02-17

中标分类：
-

国标分类：
-

实施时间：

摘要： CGA E-3 specifies the connections on removable pipeline regulators and station outlets used in the welding, cutting, and allied processes where the pipeline pressure does not exceed 200 psi (1380 kPa). Removable connections are those that are commonly and readily engaged or disengaged in routine use and service.A regulator connected to or in the pipeline by pipe threads, bolted flanges, etc., is not considered removable. Therefore, this standard does not apply to the following:regulators built into equipment so as to become an integral part of a larger device;high capacity regulators generally used in fixed locations and provided with inlet fittings larger than covered in this standard; andregulators attached to the pipeline by pipe threads, flanges, etc.All new pipeline installations shall incorporate the connections specified in Section 5.This standard does not prejudice the continued use of acetylene and LPG type connections in service or in inventory at a manufacturer's or user's site that were manufactured before the effective date of this standard provided the connections are identifiable with the appropriate CGA markings.The effective date of this standard is three years from the date of the publication of this edition, which was February 17, 2021. New acetylene and LPG pipeline installations on and after the effective date of this standard shall be in compliance with this standard.
7.[标准] Guideline for Complying with Data Integrity Regulatory Expectations

遵守数据完整性法规要求的指南

发布单位：
美国-美国压缩气体协会(US-CGA)

标准状态：
现行

标准号：
CGA M-27

发布时间：
2021-08-24

中标分类：
-

国标分类：
-

实施时间：

摘要： Both the U.S. Food and Drug Administration (FDA) and Health Canada (HC) have developed guidance documents for their respective current expectations for data integrity to comply with respective Current Good Manufacturing Practices (CGMP) requirements. In the United States, see Data Integrity and Compliance with CGMP Guidance for Industry and in Canada, see Health Canada Guidance Document GUI-0001, Good manufacturing practices guide for drug products.
8.[标准] Guideline for the Post Manufacture Tare Weight Marking of Cylinders

气瓶制造后皮重标记指南

发布单位：
美国-美国压缩气体协会(US-CGA)

标准状态：
现行

标准号：
CGA C-26

发布时间：
2021-08-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This publication defines terminology, requirements, and procedures for the post manufacture marking of tare weights on cylinders of 1000 lb (454 kg) or less water capacity to be filled with liquefied compressed gas and other gases where the cylinder could require a tare weight. This publication does not apply to cylinders used in acetylene service.The information contained in this publication enhances the safety of packaging offered for transportation. These recommendations in no way supersede any existing state or local regulations or regulations of any other jurisdictions.This publication does not address the requirements of filling cylinders with a liquefied gas. For liquefied gas filling, see Parts 173.304, 173.304a, and 173.304b 49 CFR or CSA B340 for specific requirements.
9.[标准] CGA Position Statement on Medical Gases and the Potential to Contain Nitrosamine

CGA关于医用气体和含有亚硝胺的可能性的立场声明

发布单位：
美国-美国压缩气体协会(US-CGA)

标准状态：
现行

标准号：
CGA PS-66

发布时间：
2021-09-24

中标分类：
-

国标分类：
-

实施时间：

摘要： The discovery of nitrosamine impurity in one type of drug product in 2018, led the United States Food and Drug Administration (FDA), Health Canada, and other international regulators to begin to investigate the presence of this contaminant in other drugs. With additional drug products being identified leading to recalls in 2019, the FDA and Health Canada required firms to establish plans to conduct risk analysis of their manufactured drug products and the active pharmaceutical ingredients they used for the presence of nitrosamines. If nitrosamines were found to be present, firms were required to ensure that levels did not exceed recommended acceptable intake limits. Medical gases are classified as drugs in both the United States and Canada, therefore CGA evaluated the production inputs and outputs of common medical gases. CGA members have also received inquiries regarding nitrosamine contamination of gases used by pharmaceutical firms in the manufacture of their products. This position statement and the associated technical report reflect the results of the evaluation CGA performed and is consistent with CGA's March 26, 2020 letter to Health Canada in response to DEL Bulletin No 57 regarding nitrosamines.
10.[标准] Technical Report on Nitrosamine Impurities in Nitrous Oxide and other Medical Gases

关于氧化亚氮和其他医用气体中亚硝胺杂质的技术报告

发布单位：
美国-美国压缩气体协会(US-CGA)

标准状态：
现行

标准号：
CGA TR-5

发布时间：
2021-11-23

中标分类：
-

国标分类：
-

实施时间：

摘要： This publication evaluates the possible synthesis of nitrosamines from the thermal decomposition of ammonium nitrate, in the manufacture of nitrous oxide.
11.[标准] Safe Design and Operation of Cryogenic Enclosures

低温外壳的安全设计和运行

发布单位：
美国-美国压缩气体协会(US-CGA)

标准状态：
现行

标准号：
CGA P-8.8

发布时间：
2021-01-01

中标分类：
-

国标分类：
-

实施时间：

摘要： Cryogenic enclosures can create potential process safety hazards. This publication identifies general hazards and provides guidance to reduce their frequency and consequences. It provides safety guidance and addresses design and operating practices only as they affect safety.This publication addresses both cryogenic air separation unit (ASU) and hydrogen/carbon monoxide (HYCO) processes.This publication is primarily to document current practices and is intended to apply to new facilities. It is recognized that some existing plants may not meet all recommendations or requirements from this publication. This publication need not be applied retroactively, including where this publication uses the word?shall?.This publication does not cover the following:Generally accepted engineering practices for structures and process equipment; only those issues that are specific to cryogenic enclosures are included;Enclosures for processes producing liquid hydrogen or helium. The extreme cold temperatures of these processes require specialized knowledge and practices that are beyond the scope of this publication; andExternal structures on/attached to the cryogenic enclosure, for example, platforms, ladders, vents, lightning arrestors, etc. For more information on the safe location of oxygen and nitrogen vents relative to the location of platforms and ladders, see CGA P-8.7, Safe Location of Oxygen and Inert Gas Vents.
12.[标准] Flammable Gases and/or Oxygen Contamination in Carbon Dioxide Feed Gas

二氧化碳原料气中的易燃气体和/或氧气污染

发布单位：
美国-美国压缩气体协会(US-CGA)

标准状态：
现行

标准号：
CGA G-6.10

发布时间：
2021-08-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This publication alerts carbon dioxide producers and plant operators to potential risks related to changing carbon dioxide feed gas composition. It also discusses the dangers related to excess oxygen or hydrocarbon levels in catalytic oxidation and sulfur and hydrocarbon removal systems used to purify carbon dioxide. In addition, potential fire hazards that can be encountered when spent adsorbent media is exposed to air during periodic replacement are reviewed. Finally, this publication provides recommendations to prevent fire and explosions related to these causes in by-product carbon dioxide plants.
13.[标准] Supplemental Information for Safety Data Sheet Hazard Communication

安全数据表危险沟通补充信息

发布单位：
美国-美国压缩气体协会(US-CGA)

标准状态：
现行

标准号：
CGA P-65

发布时间：
2021-01-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This publication was prepared to provide supplemental information for the preparation of safety data sheets (SDSs) to meet requirements in Title 29 of the U.S. Code of Federal Regulations (29 CFR) Part 1910.1200, the U.S. Occupational Safety and Health Administration's Hazard Communication Standard, which follows the Globally Harmonized System of Classification and Labelling of Chemicals (GHS).
14.[标准] CGA Position Statement on Odorizing Atmospheric Gases (Oxygen, Nitrogen, and Argon)

CGA关于加臭大气气体（氧气、氮气和氩气）的立场声明

发布单位：
美国-美国压缩气体协会(US-CGA)

标准状态：
现行

标准号：
CGA PS-1

发布时间：
2021-02-10

中标分类：
-

国标分类：
-

实施时间：

摘要： CGA PS-1 describes CGA's position on the question of whether or not odorants should be used in atmospheric gases to allow their presence to be detected, and thereby reduce the possibility of accidents due to oxygen enriched or deficient atmospheres.
15.[标准] Guideline on Due Diligence Considerations for the Compressed Gas Industry

压缩气体行业尽职调查注意事项指南

发布单位：
美国-美国压缩气体协会(US-CGA)

标准状态：
现行

标准号：
CGA P-90

发布时间：
2021-09-24

中标分类：
-

国标分类：
-

实施时间：

摘要： This publication was developed to impart a high-level understanding of environmental due diligence including what it is, why it is important, and when it should be conducted.
16.[标准] Guideline for Unloading Tankers of Cryogenic Oxygen, Nitrogen, and Argon

低温氧、氮和氩槽车卸货指南

发布单位：
美国-美国压缩气体协会(US-CGA)

标准状态：
现行

标准号：
CGA P-35

发布时间：
2021-07-16

中标分类：
-

国标分类：
-

实施时间：

摘要： This publication was developed to provide general safety and unloading guidelines to be used by service providers and providers of drivers and equipment to the compressed gas industry for the distribution of cryogenic liquids by bulk cargo tank. These guidelines assist drivers when there are physical differences between the cargo tanks, pumping systems, and customer storage tanks that the driver will operate during the unloading of cryogenic liquids.
17.[标准] Guideline Method for Determining the Minimum of 0.2 Water in Anhydrous Ammonia

测定无水氨中0.2%水含量的指导方法

发布单位：
美国-美国压缩气体协会(US-CGA)

标准状态：
现行

标准号：
CGA G-2.2

发布时间：
2021-01-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This publication is intended to provide shippers and carriers with a guideline method of analysis to determine the presence in anhydrous ammonia of the prescribed minimum water content of 0.2% by weight as required by DOT regulations. Lack of the appropriate percentage of water in single loads of ammonia has been found by experience to result in extensive stress corrosion damage to the QT cargo tanks. This method is intended for field use and thus the equipment and procedure selected may vary slightly from that used under laboratory conditions. Other proven methods of determining water content are acceptable.
18.[标准] Mechanical Integrity of Generator Systems in Acetylene Plants

乙炔装置中发电机系统的机械完整性

发布单位：
美国-美国压缩气体协会(US-CGA)

标准状态：
历史

标准号：
CGA G-1.12

发布时间：
2021-07-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This publication is intended for designers, manufacturers, and operators within the acetylene industry. Its purpose is to give guidance on development of mechanical integrity programs for acetylene generators. The user of this publication should review the model mechanical integrity plan and create a site-specific mechanical integrity plan.This publication gives guidance on the mechanical integrity (MI) of acetylene generator systems that use calcium carbide added to water, known as wet generation. An MI program is intended to ensure that the generator system components do not fail in a way that causes or enhances a catastrophic release of highly hazardous chemicals. This publication identifies potential failure scenarios and consequences for acetylene generator components. For each failure scenario whose consequence is a loss of containment, the publication identifies an inspection method, a minimum frequency of inspection, and the acceptance criteria for the inspection method.
19.[标准] CGA Position Statement on the Use of Railroad Tank Cars for Stationary Liquid Carbon Dioxide Storage

CGA关于使用铁路罐车固定储存液态二氧化碳的立场声明

发布单位：
美国-美国压缩气体协会(US-CGA)

标准状态：
现行

标准号：
CGA PS-30

发布时间：
2021-01-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This position statement describes CGA's position on the use of railroad tank cars for stationary liquid carbon dioxide storage. CGA strongly recommends that railroad tank cars manufactured with ASTM A212 Grade B, A285 Grade C and A515 Grade 70 not be used for stationary liquid carbon dioxide storage. CGA also recommends that DOT 105A500W and DOT 105J500W railroad tank cars not be converted to stationary liquid carbon dioxide storage. The reasons for these recommendations are outlined in the document.
20.[标准] Guideline for Analytical Validations for Food Gases

食品气体分析验证指南

发布单位：
美国-美国压缩气体协会(US-CGA)

标准状态：
现行

标准号：
CGA F-4

发布时间：
2021-07-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This publication is intended to provide guidance for companies collecting method validation data for food gas monograph submission or updates. It also provides guidance for companies collecting data to support the use of alternate test methods to those in the compendia or those collecting data to support the use of methods to test for gases not listed in the Food Chemical Codex (FCC) compendia.This guideline is intended to meet the requirements of General Information/Validation of Food Chemical Codex Methods in the FCC.This publication does not include information on the structure of a validation protocol and report. For more information on these topics see CGA M-6, Standard for Analytical Method Validation [2].