统一磨料制造商协会_国内外标准网文献检索下载

1.[标准] Safety Requirements for the Use, Care and Protection of Abrasive Wheels

砂轮使用、保养和保护的安全要求

发布单位：
美国-统一磨料制造商协会(US-UUMA)

标准状态：
现行

标准号：
UAMA B7.1-2017

发布时间：
2017-10-25

中标分类：
-

国标分类：
-

实施时间：

摘要： This safety standard sets forth requirements forthe safe use, care and protection of abrasivewheels and the machines for which they aredesigned. Included in this standard are therequirements for wheel guards, flanges, chucksand proper storage, handling and mountingtechniques.Exclusions from this standard are natural sandstone,pulpstone and coated abrasive products(except for Type 27 and 29 flap disc wheels).This standard also does not apply to machinesusing loose abrasives.
2.[标准] Markings for Identifying Grinding Wheels and Other Bonded Abrasives

用于识别砂轮和其他粘结磨料的标记

发布单位：
美国-统一磨料制造商协会(US-UUMA)

标准状态：
现行

标准号：
UAMA B74.13-2016

发布时间：
2016-10-21

中标分类：
-

国标分类：
-

实施时间：

摘要： UAMA B74.13-2016 applies to grinding wheels and other bonded abrasives: segments, bricks, sticks, hones,rubs, and other shapes, which are tools used to remove material, alter shape or size, produce a desiredsurface or accuracy of dimension, or a combination of these objectives.The standard does not apply to specialties such as sharpening stones, or to grinding wheels normally distributed in resale and certain specialized industrial markets, where radically different symbols arecommonly used.
3.[标准] American National Standard for Grading of Certain Abrasive Grain On Coated Abrasive Material

美国国家标准涂层磨料上某些磨料颗粒的分级

发布单位：
美国-统一磨料制造商协会(US-UUMA)

标准状态：
历史

标准号：
UAMA B74.18-2016

发布时间：
2016-11-01

中标分类：
-

国标分类：
-

实施时间：

摘要： The purpose of this American National Standardis to provide a nationally recognized standardfor the grading by particle size of certain abrasivegrain on coated abrasive products such assheets, belts, bands and discs. The standardalso serves as a basis for understanding betweenpurchasers and sellers as to the particlesize desired or supplied.
4.[标准] American National Standard Test for Determining Magnetic Content of Abrasive Grains

测定磨粒磁性含量的美国国家标准试验

发布单位：
美国-统一磨料制造商协会(US-UUMA)

标准状态：
现行

标准号：
UAMA B74.19-2016

发布时间：
2016-05-23

中标分类：
-

国标分类：
-

实施时间：

摘要： The purpose of UAMA B74.19-2016 is to establish a nationally recognized basis for determining the magnetic content of abrasive grain1) used in the manufacture of grinding wheels, coated abrasive products, general polishing, and other general industrial uses such as pressure blasting, wiresawing, lithoplate graining, etc.
5.[标准] American National Standards Specifications for Grading of Abrasive Microgrits

美国国家标准磨料粒度分级规范

发布单位：
美国-统一磨料制造商协会(US-UUMA)

标准状态：
现行

标准号：
UAMA B74.10-2015

发布时间：
2015-01-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This standard sets forth microgrit size designationsand size limits, as well as the test procedure whichis used by the industry, in classifying abrasive microgritsby their size.
6.[标准] The Use, Care, and Protection of Abrasive Wheels

砂轮的使用、保养和保护

发布单位：
美国-统一磨料制造商协会(US-UUMA)

标准状态：
历史

标准号：
UAMA B7.1-2010

发布时间：
2010-08-20

中标分类：
-

国标分类：
-

实施时间：

摘要： This safety standard sets forth requirements for the safe use, care and protection of abrasive wheels and the machines for which they are designed. Included in this standard are the requirements for safety guards, flanges, chucks and proper storage, handling and mounting techniques.Exclusions from this standard are natural sandstone, pulpstone and coated abrasive products. This standard also does not apply to machines using loose abrasives.
7.[标准] American National Standard Methods of Chemical Analysis of Aluminum Oxide Abrasive Grain and Abrasive Crude

美国国家标准氧化铝磨料颗粒和磨料原油化学分析方法

发布单位：
美国-统一磨料制造商协会(US-UUMA)

标准状态：
现行

标准号：
UAMA B74.14-2007(R2020)

发布时间：
2007-04-30

中标分类：
-

国标分类：
-

实施时间：

摘要： UAMA B74.14-2007 (R2020) covers procedures for the chemical analysis of aluminum oxide abrasive grain and abrasive crude. The methods apply to products as sold commercially but not necessarily after alteration in service.
8.[标准] American National Standards Test for Capillarity of Abrasive Grains

美国国家标准磨料毛细性试验

发布单位：
美国-统一磨料制造商协会(US-UUMA)

标准状态：
现行

标准号：
UAMA B74.5-1964(R2007)

发布时间：
2007-08-24

中标分类：
-

国标分类：
-

实施时间：
9.[标准] American National Standards Procedure for Sampling of Abrasive Grains

美国国家标准磨粒取样程序

发布单位：
美国-统一磨料制造商协会(US-UUMA)

标准状态：
现行

标准号：
UAMA B74.6-2001(R2007)

发布时间：
2007-08-24

中标分类：
-

国标分类：
-

实施时间：
10.[标准] American National Standard Test for Determining Magnetic Content of Abrasive Grains

测定磨粒磁性含量的美国国家标准试验

发布单位：
美国-统一磨料制造商协会(US-UUMA)

标准状态：
历史

标准号：
UAMA B74.19-2002(R2013)

发布时间：
2002-01-01

中标分类：
-

国标分类：
-

实施时间：
11.[标准] Standard for Measuring Relative Crystal Strength of Diamond and CBN Grit

金刚石和立方氮化硼砂砾的相对晶体强度测量标准

发布单位：
美国-统一磨料制造商协会(US-UUMA)

标准状态：
现行

标准号：
UAMA B74.23-2002(R2014)

发布时间：
2002-10-29

中标分类：
-

国标分类：
-

实施时间：

摘要： The purpose of UAMA B74.23-2002 (R2014) is to establish an agreed method for checking the relative strengths of diamond and cubic boron nitride (CBN) grains for use in the manufacture of saw blades and other industrial diamond products. It is intended to serve as a common basis of understanding for diamond grit producers and for the manufacturers, distributors and users of these abrasive products. This standard sets out a measurement method for use by the industry for determining the relative strength of various diamond and CBN grains.
12.[标准] American National Standard Design Test for Type 27 Portable Grinding Wheels

27型便携式砂轮的美国国家标准设计试验

发布单位：
美国-统一磨料制造商协会(US-UUMA)

标准状态：
现行

标准号：
UAMA B74.22-1991(R2014)

发布时间：
1991-10-24

中标分类：
-

国标分类：
-

实施时间：

摘要： The scope of UAMA B74.22-1991 (R2014) is limited to 9" x 1/4" Type 27 portable grinding wheels that can be cracked in such a manner that the crack is not visible to the operator. If the 9" x 1/4" wheel passes the test then 7" x 1/4" wheels of the same design are also considered to have passed since the test conditions on a 9" x 1/4" wheel are much more severe than on a 7" x 1/4" wheel.