爱迪生照明公司协会_国内外标准网文献检索下载

1.[标准] Guide for Installation of Pipe-Type Cable Systems - 3rd Edition

管道式电缆系统安装指南第3版

发布单位：
美国-爱迪生照明公司协会(US-AAIC)

标准状态：
现行

标准号：
AEIC CG3-21

发布时间：
2022-02-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This guide is intended to outline various construction techniques relating to the installation of High-Pressure Fluid-Filled and High-Pressure Gas-Filled Pipe-Type cable systems. The purpose is to provide an aid in the preparation of installation specifications for these cable systems. The design of such systems is beyond the scope of this guide. Pipe-type cable manufacturers can provide additional information and instructions on the installation of their cable systems.The guide describes the various materials currently available, such as the several pipe coatings, etc., but makes no attempt to recommend one material over another. The varying installation techniques associated with different materials are set forth in the guide. Certain materials may be available which are not covered in the guide. However, this does not necessarily imply that these materials are unacceptable for pipe-type cable installations.The various installation and testing techniques covered in this guide must be considered as general in nature and may not be applicable to a particular installation. Local situations must be considered when applying this guide to specific projects.This guide is applicable to all commonly used pipe to be installed for use with high-pressure pipe-type cable systems, including the pipes associated with the pressurization and/or cooling systems.
2.[标准] Guide for Establishing the Maximum Operating Temperatures of Impregnated Paper and Laminated Paper Polypropylene Insulated Cable - 5th Edition

浸渍纸和层压纸聚丙烯绝缘电缆最高工作温度的确定指南.第5版

发布单位：
美国-爱迪生照明公司协会(US-AAIC)

标准状态：
现行

标准号：
AEIC CG1-19

发布时间：
2019-06-01

中标分类：
-

国标分类：
-

实施时间：

摘要： AEIC CG1-19 covers establishment of maximum conductor operating temperatures for paper and paper-polypropylene insulated cable systems rated 1 kV AC through 345 kV AC. Some insight is provided to understanding the limitations imposed by joint movement in manholes and hydrostatic pressure changes due to variance in installed cable height.
3.[标准] Specifications for Impregnated-Paper Insulated Metallic-Sheathed Cable, Low Pressure Gas-Filled Type - 4th Edition

低压充气浸渍纸绝缘金属护套电缆规范.第4版

发布单位：
美国-爱迪生照明公司协会(US-AAIC)

标准状态：
现行

标准号：
AEIC CS3-16

发布时间：
2016-04-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This specification applies to impregnated paper-insulated, metallic-sheathed cable of the low pressure gas-filled type which is to be used for the transmission and distribution of electrical energy on electric utility systems.
4.[标准] Specification for Extruded Insulation Power Cables and Their Accessories Rated Above 46kV through 345 KVac - 2nd Edition

额定电压大于46kV至345 KVac的挤压绝缘电力电缆及其附件规范.第2版

发布单位：
美国-爱迪生照明公司协会(US-AAIC)

标准状态：
现行

标准号：
AEIC CS9-15

发布时间：
2015-08-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This specification describes the requirements for the design and supply of single core extruded insulation power cable systems, including their accessories, for rated AC voltages above 46 kV to 345 kV. It applies to cable systems with ethylene propylene rubber (EPR) insulation above 46 kV to 138 kV, and to cable systems with cross-linked polyethylene (XLPE) insulation over the complete voltage range above 46 kV to 345 kV.
5.[标准] Underground Extruded Power Cable Pulling Guide

地下挤压式电力电缆牵引导轨

发布单位：
美国-爱迪生照明公司协会(US-AAIC)

标准状态：
现行

标准号：
AEIC CG5-15

发布时间：
2015-09-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This guide outlines the pulling parameters that need to be considered when installing underground power cable in a duct. Only extruded power cable is covered. Installations with more than three cables in a conduit are not included. Cable installations in trays or racks are also not included.A variety of pulling guides and computer software are available from many power cable manufacturers and cable lubricant manufacturers. This guide is intended to complement these publications. Cable specialists from each electric power utility may desire to use this guide to develop their own simplified version which incorporates criteria unique to their systems.In the body of this guide a simplified approach is used to calculate pulling tensions and sidewall bearing pressures (SWBP) for the most commonly encountered conditions in the field.
6.[标准] Specification for Impregnated Paper and Laminated Paper Polypropylene Insulated High Pressure Pipe Type Cable - 7th Edition

浸渍纸和层压纸聚丙烯绝缘高压管型电缆规范.第7版

发布单位：
美国-爱迪生照明公司协会(US-AAIC)

标准状态：
现行

标准号：
AEIC CS2-14

发布时间：
2014-07-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This specification applies to high-pressure pipe-type impregnated paper-insulated and laminated paper polypropylene insulated cables for use in the transmission of electrical energy. It describes the various choices that an engineer must consider when specifying paper-insulated cables designed for operation under either liquid or gas pressure for utility use. In addition, both types of cables are intended for operation at a nominal pressure of 200 psig (1400 kPa).The purpose of this specification is to insure the furnishing of high quality cable and as a supplement, address some of the basic quality requirements for the pipe and pipe coating materials. Guide for the installation of pipes are addressed in AEIC GC3.Engineering units reflect the Imperial System. The Metric System equivalents when included are for information only.
7.[标准] Specification for Extruded Dielectric, Shielded Power Cables Rated 5 Through 46 kV - 4th Edition

额定电压为5至46 kV的挤压绝缘屏蔽电力电缆规范.第4版

发布单位：
美国-爱迪生照明公司协会(US-AAIC)

标准状态：
历史

标准号：
AEIC CS8-13

发布时间：
2013-09-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This specification supplements ANSI/ICEA Standards S094-649, "Standard for Concentric Neutral Cables Rated 5 through 46 kV" and S-97-682, "Standard for Utility Shielded Power Cables Rated 5 through 46 kV" published by the Insulated Cable Engineers Association (ICEA). The user is urged to understand fully the requirements outlined in the ANSI/ICEA standards to be able to use this specification effectively.This specification covers cables rated 5 through 46 kV, which are used for the distribution of electric energy on electric utility systems.
8.[标准] Guide for Testing Moisture Impervious Barriers Made of Laminated Foil Bonded to the Jacket of XLPE Transmission Cables - 1st Edition (Includes Errata 2014)

连接到XLPE传输电缆护套的层压箔制成的防潮屏障试验指南-第1版（包括勘误表2014）

发布单位：
美国-爱迪生照明公司协会(US-AAIC)

标准状态：
现行

标准号：
AEIC CG13-11

发布时间：
2011-10-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This guide provides a comprehensive procedure for testing a manufacturer's laminate foil moisture impervious barrier for use in XLPE insulated transmission cables. The testing protocol confirms the mechanical integrity of the laminated foil design and its bonding strength to the cable jacket, to ensure there will be no moisture ingress into the cable core after the samples have been subjected to simulated field installation requirements and simulated long-term operational characteristics.This guide is intended to be a complement to other guides and specifications governing the testing of XLPE transmission cables, and should not be construed as negating the need for any part of any other applicable guides or specifications. When the tests specified in this document have been performed on the smallest and largest size cable cores, the test results for this specific jacket and moisture barrier design are applicable to all intervening cable core sizes in the same product range, as long as the same exact materials and the same construction and manufacturing processes have been employed.This guide details a systematic test sequence that can be used by the cable manufacturers to determine if their finished product, a transmission cable with laminate foil design, will prevent moisture ingress into its cable core.The following topics will be discussed to assist the user of this Guide to become more familiar with the cable laminate foil design:a) Principles and Basic Background Factorsb) Moisture Barriersc) Properties and Testing of Metallic Laminated Moisture Barriersd) Qualification Tests of Metallic Laminated Moisture Barrierse) Sample Test of Metallic Laminated Moisture Barriers
9.[标准] Specification for Extruded Insulation Power Cables and Their Accessories Rated Above 46kV through 345 KVac - 1st Edition

额定电压大于46kV至345 KVac的挤压绝缘电力电缆及其附件规范-第1版

发布单位：
美国-爱迪生照明公司协会(US-AAIC)

标准状态：
历史

标准号：
AEIC CS9-06

发布时间：
2006-01-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This specification describes the requirements for the design and supply of single core extruded insulation power cable systems, including their accessories, for rated AC voltages above 46 kV to 345 kV. It applies to cable systems with ethylene propylene rubber (EPR) insulation above 46 kV to 138 kV, and to cable systems with cross-linked polyethylene (XLPE) insulation over the complete voltage range above 46 kV to 345 kV.
10.[标准] Guide for Installation of Pipe-Type Cable Systems - 2nd Edition

管道式电缆系统安装指南第2版

发布单位：
美国-爱迪生照明公司协会(US-AAIC)

标准状态：
历史

标准号：
AEIC CG3-05

发布时间：
2005-01-31

中标分类：
-

国标分类：
-

实施时间：

摘要： This guide is intended to outline various construction techniques relating to the installation of High-Pressure Fluid-Filled and High-Pressure Gas-Filled Pipe-Type cable systems. The purpose is to provide an aid in the preparation of installation specifications for these cable systems. The design of such systems is beyond the scope of this guide. Pipe-type cable manufacturers can provide additional information and instructions on the installation of their cable systems.The guide describes the various materials currently available, such as the several pipe coatings, etc., but makes no attempt to recommend one material over another. The varying installation techniques associated with different materials are set forth in the guide. Certain materials may be available which are not covered in the guide. However, this does not necessarily imply that these materials are unacceptable for pipe-type cable installations.The various installation and testing techniques covered in this guide must be considered as general in nature and may not be applicable to a particular installation. Local situations must be considered when applying this guide to specific projects.This guide is applicable to all commonly used pipe to be installed for use with high-pressure pipe-type cable systems, including the pipes associated with the pressurization and/or cooling systems.
11.[标准] Guide for Replacement and Life Extension of Extruded Dielectric 5 - 45 kV Underground Distribution Cable Systems - 2nd Edition

5-45kV挤压绝缘地下配电电缆系统的更换和寿命延长指南.第2版

发布单位：
美国-爱迪生照明公司协会(US-AAIC)

标准状态：
现行

标准号：
AEIC CG7-05

发布时间：
2005-11-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This guide deals with extruded solid dielectric utility distribution system cables rated 5 through 46 kV. Considerations are addressed in pursuing courses of action available for cable replacement and cable life extension, based upon current options within the industry.The following topics will be discussed in order to assist the user in developing a cost-effective method for identifying and correcting problem cables and accessories on medium voltage underground cable systems:Identifying Problem Cable SystemsDecision Making ToolsSelection and Implementation of a Solution or Corrective ActionReliability and System Enhancements to Reduce Cable Failures
12.[标准] Underground Extruded Power Cable Pulling Guide

地下挤压式电力电缆牵引导轨

发布单位：
美国-爱迪生照明公司协会(US-AAIC)

标准状态：
历史

标准号：
AEIC CG5-05

发布时间：
2005-06-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This guide outlines the pulling parameters that need to be considered when installing underground power cable in a duct. Only extruded power cable is covered. Installations with more than three cables in a conduit are not included. Cable installations in trays or racks are also not included.A variety of pulling guides and computer software are available from many power cable manufacturers and cable lubricant manufacturers. This guide is intended to complement these publications. Cable specialists from each electric power utility may desire to use this guide to develop their own simplified version which incorporates criteria unique to their systems.In the body of this guide a simplified approach is used to calculate pulling tensions and sidewall bearing pressures (SWBP) for the most commonly encountered conditions in the field.
13.[标准] Guide for Installing, Operating, and Maintaining Lead Covered Cable Systems Rated 5kV through 46 kV- 1st Edition

额定电压为5kV至46kV的铅封电缆系统的安装、操作和维护指南-第1版

发布单位：
美国-爱迪生照明公司协会(US-AAIC)

标准状态：
现行

标准号：
AEIC CG9-00

发布时间：
2000-01-01

中标分类：
-

国标分类：
-

实施时间：

摘要： Lead covered cables have been in use for over 80 years and have demonstrated exceptional service reliability. Two of the most common constructions in use have a lead sheath. Dealing with the lead on these cables has become costly due to Federal and State safety regulations imposed on the handling of this material.This guide recognizes the most common materials and techniques associated with the installation and maintenance of lead covered cables. Other materials or techniques may be acceptable.The installation techniques and practices covered in this guide must be considered general in nature and may not be applicable to all installations. Local circumstances must be considered when applying this guide to specific situations.This Guide was Reaffirmed in June, 2008.
14.[标准] Specification for Impregnated Paper-Insulated Low and Medium Pressure Self-Contained Liquid Filled Cable - 8th Edition

浸渍纸绝缘低压和中压自容充液电缆规范.第8版

发布单位：
美国-爱迪生照明公司协会(US-AAIC)

标准状态：
历史

标准号：
AEIC CS4-93

发布时间：
1993-01-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This specification applies to impregnated paper-insulated, metal-sheathed cable of the low and medium pressure self contained liquid filled type, which is to be used for the transmission and distribution of AC electrical energy and designed for operation under liquid pressure.The tests herein apply only to cable with one or more insulating liquid channels, with single lead sheath, with double lead sheath, reinforced lead sheath, aluminum sheath, or with sheath having non-metallic covering over the sheath.