有线电信工程师学会_国内外标准网文献检索下载

1.[标准] Test Method for 'F' Connector Return Loss

“F”连接器回波损耗的试验方法

发布单位：
美国-有线电信工程师学会(US-SSTE)

标准状态：
现行

标准号：
SCTE 04 2021

发布时间：
2021-01-01

中标分类：
-

国标分类：
-

实施时间：

摘要： The purpose of this document is to provide a test method for measuring return loss of "F" male connectors with cable in the frequency range of 5 MHz to 3000 MHz by utilizing the time domain-gating feature of the network analyzer. Male "F" connectors that conform to SCTE 123, Specification for "F" Connector, Male, Feed-Through or SCTE 124, Specification for "F" Connector, Male, Pin Type that are used with 75 ohm flexible RF coaxial cable, such as, but not limited to, SCTE 74, Specification for Braided 75 ohm Flexible RF Coaxial Drop Cable.
2.[标准] SCTE Recommended Optical Fiber Cable Types for Outside Plant Trunk and Distribution Applications

SCTE推荐的用于外部工厂主干和配电应用的光纤电缆类型

发布单位：
美国-有线电信工程师学会(US-SSTE)

标准状态：
现行

标准号：
SCTE 86 2021

发布时间：
2021-01-01

中标分类：
-

国标分类：
-

实施时间：

摘要： The purpose of this document is to provide guidance in selection of a suitable outside plant (OSP) optical cable with respect to different application environments. This document will provide references to The International Electrotechnical Commission (IEC) and International Telecommunication Union (ITU-T) to provide recommended standards and procedures for outside plant optical fiber and cable.
3.[标准] Test Method for Velocity of Propagation

传播速度的试验方法

发布单位：
美国-有线电信工程师学会(US-SSTE)

标准状态：
现行

标准号：
SCTE 49 2011(R2021)

发布时间：
2021-01-01

中标分类：
-

国标分类：
-

实施时间：

摘要： The method described in this procedure provides a means to measure the velocity of propagation (Vp), in coaxial cables. This method is for use with cables having low-loss dielectrics as noted in ANSI/SCTE 15 and ANSI/SCTE 74 that have relative permittivity nearly constant with frequency.
4.[标准] Test Method for Flexible Coaxial Cable Impact

挠性同轴电缆冲击试验方法

发布单位：
美国-有线电信工程师学会(US-SSTE)

标准状态：
现行

标准号：
SCTE 10 2014(R2021)

发布时间：
2021-01-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This test is to establish that specified outdoor flexible RF coaxial drop cable jackets are capable of low temperature characteristics.
5.[标准] Test Method for Interface Moisture Migration Double Ended

双端界面水分迁移的试验方法

发布单位：
美国-有线电信工程师学会(US-SSTE)

标准状态：
现行

标准号：
SCTE 60 2015(R2021)

发布时间：
2021-01-01

中标分类：
-

国标分类：
-

实施时间：

摘要： The purpose of this document is to provide a test method for detecting moisture penetration into the coaxial connector/cable and or the connector/port interface.
6.[标准] Multimedia Application and Service Part 2: IPCablecom Multimedia Web Services

多媒体应用和服务第2部分:IPCablecom多媒体Web服务

发布单位：
美国-有线电信工程师学会(US-SSTE)

标准状态：
现行

标准号：
SCTE 159-2 2017(R2021)

发布时间：
2021-01-01

中标分类：
-

国标分类：
-

实施时间：

摘要： NOTE: This document is identical to SCTE 159-2 2010 except for informative components which may have been updated such as the title page, NOTICE text, headers and footers. No normative changes have been made to this document.This specification provides a simple, open interface between a generic Application Server (AS) and an IPCablecom Multimedia Application Manager (AM). Specifically, this specification defines a common Web Service (WS) interface to the IPCablecom Multimedia Application Manager (AM) that enables an AS to dynamically request network resources on the cable operator's access network. The primary goal of this interface is to allow AS developers to rapidly create new applications in shorter timeframes and without having a deep knowledge of the cable operator's access technology. This interface is based on the SOAP/eXtensible Markup Language (SOAP/XML).
7.[标准] Test Method for 'F' Connector Return Loss In-Line Pair

线对中“F”连接器回波损耗的试验方法

发布单位：
美国-有线电信工程师学会(US-SSTE)

标准状态：
历史

标准号：
SCTE 05 2021

发布时间：
2021-01-01

中标分类：
-

国标分类：
-

实施时间：

摘要： The purpose of this procedure is to provide instructions to measure the return loss characteristics of a pair of type "F" connectors and the cable interface, inserted in the middle of a cable, from 5 MHz to 3000 MHz. This test method makes use of the time domain gating feature of the network analyzer to remove the near end and far end test set connector effects from a type "F" pair in the middle of the cable, joined by a type "F" (female) - type "F" (female) adapter.
8.[标准] Modular Headend Architecture Part 1: DOCSIS Timing Interface

模块化前端结构第1部分:DOCSIS定时接口

发布单位：
美国-有线电信工程师学会(US-SSTE)

标准状态：
现行

标准号：
SCTE 137-1 2017(R2021)

发布时间：
2021-01-01

中标分类：
-

国标分类：
-

实施时间：

摘要： The DOCSIS Timing Protocol (DTI) defined in this document supports the accurate and robust transport of the DTI server 10.24 MHz master clock, 32-bit DOCSIS timestamp, and Time of Day, to the DTI client within the DOCSIS M-CMTS cable network. The DTI protocol is structured to minimize the complexity and cost of the DTI client clocks, and the per port cost of the shared server function while supporting all S-CDMA and TDMA timing requirements.
9.[标准] Test Method for Measuring Shielding Effectiveness of Passive and Active Devices Using a GTEM Cell

用GTEM电池测量无源和有源器件屏蔽效能的试验方法

发布单位：
美国-有线电信工程师学会(US-SSTE)

标准状态：
现行

标准号：
SCTE 48-1 2021

发布时间：
2021-01-01

中标分类：
-

国标分类：
-

实施时间：

摘要： The purpose of this test is to determine the shielding effectiveness against Electromagnetic Interference (EMI) of components. This method subjects the component to an electric field of known strength. There are two individual test methods contained therein. The following depicts the type of device each of the methods are intended.
10.[标准] Multimedia Application and Service Part 1: IPCablecom Multimedia

多媒体应用与服务第1部分:IPCablecom多媒体

发布单位：
美国-有线电信工程师学会(US-SSTE)

标准状态：
现行

标准号：
SCTE 159-1 2017(R2021)

发布时间：
2021-01-01

中标分类：
-

国标分类：
-

实施时间：

摘要： The intent of this standard is to support the deployment of general Multimedia services by providing a technical definition of several IP-based signaling interfaces that leverage core QoS and policy management capabilities native to DOCSIS Versions 1.1 and greater. Throughout this standard, the term DOCSIS will be used to refer to any DOCSIS version greater than or equal to 1.1.
11.[标准] Test Method for Voltage / Spark Test of Outer Jacket

外护套电压/火花试验的试验方法

发布单位：
美国-有线电信工程师学会(US-SSTE)

标准状态：
现行

标准号：
SCTE 63 2021

发布时间：
2021-01-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This procedure specifies the spark test method to be used in determining if the outer jacket of a coaxial cable will withstand a specified voltage.
12.[标准] Digital Program Insertion-Advertising Systems Interfaces Part 7 - Message Transport

数字节目插入广告系统接口第7部分:信息传输

发布单位：
美国-有线电信工程师学会(US-SSTE)

标准状态：
现行

标准号：
SCTE 130-7 2020 with Errata Notice

发布时间：
2020-09-30

中标分类：
-

国标分类：
-

实施时间：

摘要： This document describes the Digital Program Insertion Advertising Systems Interfaces' transportprotocols required for the exchange of messages defined in the individual parts of the SCTE 130specification.Note: Security issues surrounding the transport protocols defined herein have been purposely omitted andare considered outside of the scope of this document.
13.[标准] IPCablecom 1.5 Part 10: Security

IPCablecom 1.5第10部分:安全性

发布单位：
美国-有线电信工程师学会(US-SSTE)

标准状态：
现行

标准号：
SCTE 165-10 2020

发布时间：
2020-01-01

中标分类：
-

国标分类：
-

实施时间：

摘要： IPCablecom is aimed at identifying, qualifying, and supporting packet-based voice and video products over cable systems. These products represent new classes of services utilizing cable-based packet communication networks. New service classes in the near term include voice communications and videoconferencing over cable networks and the Internet.
14.[标准] Digital Program Insertion-Advertising Systems Interfaces Part 5: Placement Opportunity Information Service

数字节目插入广告系统接口第5部分:安置机会信息服务

发布单位：
美国-有线电信工程师学会(US-SSTE)

标准状态：
现行

标准号：
SCTE 130-5 2020 with Errata Notice

发布时间：
2020-09-30

中标分类：
-

国标分类：
-

实施时间：

摘要： This document defines the messaging protocol for the POIS consistent with other parts of the SCTE 130standard. A POIS, or a repository to which it has access, stores and maintains descriptions of content placement opportunities (typically for advertisements) and the interface supports query and notification operations for those opportunities.A POIS additionally contains features, characteristics and constraints for each placement opportunity,appropriate for the platform, rights, and policies including those of the content in which it exists. Theseplacement opportunities may or may not be content specific and the traits and constraints may vary bynetwork, geographic region, or other content distribution dimension.This specification defines a standardized interface for accessing the placement opportunity informationknown to a POIS.
15.[标准] Digital Program Insertion - Advertising Systems Interfaces Part 10: Stream Restriction Data Model (SRDM)

数字节目插入广告系统接口第10部分:流限制数据模型（SRDM）

发布单位：
美国-有线电信工程师学会(US-SSTE)

标准状态：
现行

标准号：
SCTE 130-10 2020 with Errata Notice

发布时间：
2020-09-30

中标分类：
-

国标分类：
-

实施时间：

摘要： This document in conjunction with the SCTE 130 Part 10 Extensible Markup Language (XML) schema document (i.e. the XSD document) defines the XML data model expressing stream restrictions.
16.[标准] Outdoor 'F' Female to 'F' Female Inline Splice

室外“F”内螺纹至“F”内螺纹直列拼接

发布单位：
美国-有线电信工程师学会(US-SSTE)

标准状态：
历史

标准号：
SCTE 146 2017

发布时间：
2017-01-01

中标分类：
-

国标分类：
-

实施时间：

摘要： The purpose of this document is to recommend mechanical and electrical standards for 75 ohm broadbandradio frequency (RF) devices whose purpose is to provide an outdoor inline connection between two type"F" male connectors that conform to ANSI/SCTE 123; Specification for "F" Connector, Male, Feed-Through or ANSI/SCTE 124; Specification for "F" Connector, Male, Pin Type and ANSI SCTE 160,Specification for Mini F connector male Pin type. The mechanical configuration is designed toaccommodate sealing rings for external applications.This specification is not intended to restrict any manufacturer"s innovation and improvement. Thespecification may be amended in the future as deemed appropriate.
17.[标准] Test Method for Group Delay

群时延的试验方法

发布单位：
美国-有线电信工程师学会(US-SSTE)

标准状态：
历史

标准号：
SCTE 45 2017

发布时间：
2017-12-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This document describes the test methodology for measuring group delay and group delay variation ofdevices used in an HFC network.
18.[标准] DOCSIS Timing Interface

DOCSIS定时接口

发布单位：
美国-有线电信工程师学会(US-SSTE)

标准状态：
历史

标准号：
SCTE 137-1 2017

发布时间：
2017-01-01

中标分类：
-

国标分类：
-

实施时间：

摘要： The DOCSIS Timing Protocol (DTI) defined in this document supports the accurate and robust transport of the DTIserver 10.24 MHz master clock, 32-bit DOCSIS timestamp, and Time of Day, to the DTI client within the DOCSISM-CMTS cable network. The DTI protocol is structured to minimize the complexity and cost of the DTI clientclocks, and the per port cost of the shared server function while supporting all S-CDMA and TDMA timingrequirements.
19.[标准] Standard for Carriage of VBI Data in Cable Digital Transport Streams

电缆数字传输流中VBI数据传输标准

发布单位：
美国-有线电信工程师学会(US-SSTE)

标准状态：
历史

标准号：
SCTE 21 2017

发布时间：
2017-01-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This document defines a standard for the carriage of Vertical Blanking Interval (VBI) services in MPEG-2 compliant bitstreams constructed in accordance with ISO/IEC 13818-2. The approach builds upon a data structure defined in ATSC A/53 Part 4 (Digital Television Standard: Part 4 — MPEG-2 Video System Characteristics), and is designed to be backwards-compatible with that method.
20.[标准] Data Encryption Standard - Cipher Block Chaining Packet Encryption Specification

数据加密标准.密码分组链分组加密规范

发布单位：
美国-有线电信工程师学会(US-SSTE)

标准状态：
现行

标准号：
SCTE 52 2013

发布时间：
2013-12-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This document defines a method for encrypting MPEG-2 transport stream packets using the Data Encryption Standard (DES) Cipher Block Chaining (CBC) encryption standard.