国际水喉机械协会_国内外标准网文献检索下载

1.[标准] Overflow Pans for Washing Machines, Water Heaters, and Other Appliances

洗衣机、热水器和其他电器的溢流盘

发布单位：
美国-国际水喉机械协会(US-IIPM)

标准状态：
现行

标准号：
IAPMO IGC 200-2017e2

发布时间：
2017-12-01

中标分类：
-

国标分类：
-

实施时间：

摘要： IAPMO IGC 200-2017e2 covers overflow pans for washing machines, water heaters, and other appliances and specifies requirements for materials, physical characteristics, performance testing, and markings.
2.[标准] Overflow Pans for Washing Machines, Water Heaters, and Other Appliances

洗衣机、热水器和其他电器的溢流盘

发布单位：
美国-国际水喉机械协会(US-IIPM)

标准状态：
历史

标准号：
IAPMO IGC 200-2017

发布时间：
2017-07-10

中标分类：
-

国标分类：
-

实施时间：

摘要： IAPMO IGC 200-2017 covers overflow pans for washing machines, water heaters, and other appliances and specifies requirements for materials, physical characteristics, performance testing, and markings.
3.[标准] Potable Water Hygiene Systems

饮用水卫生系统

发布单位：
美国-国际水喉机械协会(US-IIPM)

标准状态：
现行

标准号：
IAPMO IGC 302-2017

发布时间：
2017-04-10

中标分类：
-

国标分类：
-

实施时间：

摘要： IAPMO IGC 302-2017 covers potable water hygiene systems consisting of valves and fittings, electronic sensors, actuators, and control devices intended to ensure the hygienic transport of potable water and specifies requirements for materials, physical characteristics, performance testing, and markings.
4.[标准] Test Method for Measuring Efficiency and Pressure Loss of Drain Water Heat Recovery Units

测量排水热回收装置效率和压力损失的试验方法

发布单位：
美国-国际水喉机械协会(US-IIPM)

标准状态：
现行

标准号：
IAPMO IGC 346-2017

发布时间：
2017-07-10

中标分类：
-

国标分类：
-

实施时间：

摘要： IAPMO IGC 346-2017 specifies test methods for measuring the performance, including the heat recovery efficiency and pressure loss, of sloped and vertical drain water heat recovery units. It is intended to serve as a performance assessment for producers, distributors, architects, code officials, contractors, installers and end users.The test methods for application to vertical drain water heat recovery units in this standard are referenced to the existing methods specified in CSA B55.1.Note: CSA B55.1 is limited to vertical only DWHR units.The test methods for application to sloped drain water heat recovery units in this standard are referenced to the existing methods specified in CSA B55.1 except that the test specimen is installed in the test apparatus in a sloped orientation.
5.[标准] Plastic Plumbing Fixtures

塑料管道装置

发布单位：
美国-国际水喉机械协会(US-IIPM)

标准状态：
历史

标准号：
IAPMO Z124-17/CSA B45.5

发布时间：
2017-04-10

中标分类：
-

国标分类：
-

实施时间：

摘要： IAPMO Z124-17 covers plastic plumbing fixtures and specifies requirements for materials, construction,performance, testing, and markings.This Standard covers the following plumbing fixtures:(a) bathtubs and combination tub/showers;(b) lavatories;(c) shower bases and shower stalls;(d) sinks:(i) bar sinks;(ii) kitchen sinks;(iii) laundry sinks; and(iv) service sinks;(e) urinals; and(f) water closets.
6.[标准] Expansion Joints and Flexible Expansion Joints for DWV Piping Systems

DWV管道系统用膨胀节和柔性膨胀节

发布单位：
美国-国际水喉机械协会(US-IIPM)

标准状态：
历史

标准号：
IAPMO PS 51-2016

发布时间：
2016-10-03

中标分类：
-

国标分类：
-

实施时间：

摘要： This Standard covers plastic, elastomeric, and metallic expansion joints and flexible expansionjoints intended for use in drain, waste, and vent systems and specifies requirements formaterials, physical characteristics, performance testing, and markings.
7.[标准] Steel Reinforced Polyethylene Rainwater Harvesting Tanks

钢骨增强聚乙烯雨水收集池

发布单位：
美国-国际水喉机械协会(US-IIPM)

标准状态：
历史

标准号：
IAPMO IGC 329-2016

发布时间：
2016-03-07

中标分类：
-

国标分类：
-

实施时间：

摘要： This Standard covers steel reinforced polyethylene rainwater harvesting tanks intended forbelow ground applications and specifies requirements for materials, physical characteristics,performance testing, and markings.Rainwater harvesting tanks covered by this Standard are(a) fabricated using steel reinforced high density polyethylene pipe;(b) prefabricated or assembled at the site of final installation;(c) intended for buried installations;(d) intended for stationary (i.e., fixed) installations only; and(e) intended for atmospheric pressure (i.e., non-pressurized) applications only.
8.[标准] Vent Pipe Plastic Membrane Funnels

通风管塑料薄膜漏斗

发布单位：
美国-国际水喉机械协会(US-IIPM)

标准状态：
现行

标准号：
IAPMO IGC 333-2016

发布时间：
2016-08-08

中标分类：
-

国标分类：
-

实施时间：

摘要： 1 Scope1.1 Scope1.1.1This Standard covers vent pipe plastic membrane funnels intended for installation on vertical vent piping systems and specifies requirements for materials, physical characteristics, performance testing, and markings.1.1.2Vent pipe plastic membrane funnels are installed on vent pipe to re-route any moisture (such as rain) that may trickle down the outside the vent pipe to the inside of the vent pipe and into the drain waste system while not compromising the integrity of the vent pipe.
9.[标准] Shower and Tub/Shower Enclosures, Bathtubs with Glass Pressure-Sealed Doors, and Shower/Steam Panels

淋浴和浴缸/淋浴房、带玻璃压力密封门的浴缸和淋浴/蒸汽面板

发布单位：
美国-国际水喉机械协会(US-IIPM)

标准状态：
历史

标准号：
IAPMO IGC 154-2016

发布时间：
2016-11-07

中标分类：
-

国标分类：
-

实施时间：

摘要： Scope1.1.1This Standard covers shower/steam panels, enclosures for showers and tub/shower combinations, bathtubs and tub/shower combinations with glass pressure-sealed doors, and floor-mounted showers intended for new and retrofit applications and specifies requirements for materials, physical characteristics, performance testing, and markings.Note: In this Standard, "enclosures for showers and tub/shower combinations" are referred to as "enclosures".1.1.2Shower/steam panels and enclosures covered by this Standard can include(a) factory-installed supply and waste fittings;(b) factory-formed shower thresholds; and(c) factory-plumbed shower doors.
10.[标准] Alternate Water Source Systems

备用水源系统

发布单位：
美国-国际水喉机械协会(US-IIPM)

标准状态：
历史

标准号：
IAPMO IGC 324-2016

发布时间：
2016-09-12

中标分类：
-

国标分类：
-

实施时间：

摘要： 1 Scope1.1.1This Standard covers alternate water source systems intended to process water from alternate water sources such as greywater, rainwater, atmospheric generated water, and air conditioning condensate, for use in subsurface and/or surface irrigation and toilet/urinal flushing applications, and specifies requirements for materials, physical characteristics, performance testing, and markings.1.1.2Alternate water source systems covered by this Standard are of the(a) catch basin only type, intended to supply water for use in subsurface irrigation; orNote:An example of a schematic for the catch basin only type system is shown in Figure 1.(b) catch basin plus separate, connected, reverse osmosis and UV processing station type, intended to supply water for surface irrigation and toilet/urinal flushing applications.Note:An example of a schematic for the reverse osmosis and UV processing is shown in Figure 2.
11.[标准] Flexible Continuous Wastes for Lavatories and Sinks

厕所和水槽用柔性连续垃圾

发布单位：
美国-国际水喉机械协会(US-IIPM)

标准状态：
历史

标准号：
IAPMO IGC 301-2013e3

发布时间：
2015-05-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This standard covers flexible connectors intended for connecting lavatories and sinks to the sanitary drainage system and specifies requirements for materials, physical characteristics, performance testing and markings.
12.[标准] Cured-in-Place Point Rehabilitation Systems for Pipe Reconstruction

用于管道重建的就地固化点修复系统

发布单位：
美国-国际水喉机械协会(US-IIPM)

标准状态：
现行

标准号：
IAPMO IGC 321-2015e1

发布时间：
2015-11-09

中标分类：
-

国标分类：
-

实施时间：

摘要： This Standard covers cured-in-place point rehabilitation systems for pipe reconstruction and alsospecifies requirements for materials, physical characteristics, performance tests, and markings.
13.[标准] Self-Cleaning Water Closets

自洁式抽水马桶

发布单位：
美国-国际水喉机械协会(US-IIPM)

标准状态：
现行

标准号：
IAPMO IGC 316-2015

发布时间：
2015-08-17

中标分类：
-

国标分类：
-

实施时间：

摘要： This standard covers water closets with integral self-cleaning systems that operate byintroducing liquid chemical cleaning agents into the water channels of the water closet during aspecific cleaning cycle, separate from the normal flush cycle.
14.[标准] Tileable Shower Receptors and Shower Kits

瓷砖淋浴接收器和淋浴套件

发布单位：
美国-国际水喉机械协会(US-IIPM)

标准状态：
历史

标准号：
IAPMO PS 106-2014

发布时间：
2014-06-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This Standard specifies requirements for materials, manufacture, physical characteristics, performance testing, and markings for:prefabricated, tileable shower receptors; andtileable and pre-tiled shower kits intended to be assembled in the place of final installation.Note: Shower kits covered by this Standard are intended to be used for walls and floors.
15.[标准] Ball Valves

球阀

发布单位：
美国-国际水喉机械协会(US-IIPM)

标准状态：
作废

标准号：
IAPMO IGC 157-2013E2

发布时间：
2014-06-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This Standard covers ball valves in sizes NPS-⅛ to NPS-4, with rated working pressures of atleast 860 kPa (125 psi) at 23 ± 2°C (73 ± 4°F), intended for water supply systems and specifies requirements for materials, physical characteristics, performance testing, and markings.The requirements of this Standard are not intended to prevent the use of alternative materialsor methods of construction provided such alternatives meet the intent and requirements of this Standard.
16.[标准] Roof Pipe Flashings

屋顶管道防水板

发布单位：
美国-国际水喉机械协会(US-IIPM)

标准状态：
现行

标准号：
IAPMO PS 64-2012ae1

发布时间：
2013-01-01

中标分类：
-

国标分类：
-

实施时间：
17.[标准] IAPMO Guide Criteria for Shower Drains with Integrated Bonding Flanges

IAPMO带整体粘接法兰的淋浴排水管指南标准

发布单位：
美国-国际水喉机械协会(US-IIPM)

标准状态：
历史

标准号：
IAPMO IGC 195-2013

发布时间：
2013-02-01

中标分类：
-

国标分类：
-

实施时间：

摘要： The purpose of this standard is to establish a generally acceptable standard for drainswith integrated bonding flanges for shower pans. Its purpose is to serve as a guide forproducers, distributors, architects, engineers, contractors, installers, inspectors andusers; and to promote understanding regarding materials, manufacture and installation.
18.[标准] IAPMO Guide Criteria for Ring Gaskets for Water Closet and Urinal Outlets

IAPMO抽水马桶和小便器出口环形垫圈指南标准

发布单位：
美国-国际水喉机械协会(US-IIPM)

标准状态：
历史

标准号：
IAPMO IGC 299-2013

发布时间：
2013-02-01

中标分类：
-

国标分类：
-

实施时间：

摘要： 1 Scope1.1 This Standard covers ring gaskets intended to seal the joints between water closets and urinalsand sanitary drainage systems and specifies requirements for materials, physical characteristics,performance testing, and markings.1.2 Ring gaskets covered by this Standard are made of(a) petroleum wax; or(b) elastomer.1.3 The requirements of this Standard are not intended to prevent the use of alternative materialsor methods of construction, provided such alternatives meet the intent and requirements of thisStandard.1.4 Proposals for amendments to this Standard will be processed in accordance with the standardswriting procedures of IAPMO.1.5 The user's attention is called to the possibility that compliance with this Standard may requireuse of an invention covered by patent rights. By publication of this Standard, no position is takenwith respect to the validity of any such claim(s) or of any patent rights in connection therewith.If a patent holder has filed a statement of willingness to grant a license under these rights onreasonable and nondiscriminatory terms and conditions to applicants desiring to obtain such alicense, then details can be obtained from IAPMO.
19.[标准] Plastic Toilet Seats

塑料马桶座圈

发布单位：
美国-国际水喉机械协会(US-IIPM)

标准状态：
现行

标准号：
IAPMO Z124.5-2013e1(R2018)

发布时间：
2013-12-01

中标分类：
-

国标分类：
-

实施时间：

摘要： IAPMO Z124.5-2013e1 (R2018) covers plastic toilet seats (including toilet seat covers) and specifies requirements for materials, construction, performance testing, and markings.The requirements of this Standard are not intended to prevent the use of alternative materials or method of construction provided such alternatives meet the intent and requirements of this Standard.In this Standard,(a) "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy to comply with the standard;(b) "should" is used to express a recommendation but not a requirement;(c) "may" is used to express an option or something permissible within the scope of the standard; and(d) "can" is used to express either a possibility or a capability. Notes accompanying sections in the body of the Standard do not specify requirements or alternative requirements; their purpose is to separate explanatory or informative material from the text. Notes to tables and figures are considered part of the table or figure and can be written as requirements.SI units are the primary units of record in global commerce. In this Standard, the inch/pound units are shown in parentheses. The values stated in each measurement system are equivalent in application but each unit system is to be used independently. Combining values from the two measurement systems can result in non?conformance with this Standard.
20.[标准] Potable Water Hygiene Systems

饮用水卫生系统

发布单位：
美国-国际水喉机械协会(US-IIPM)

标准状态：
历史

标准号：
IAPMO IGC 302-2013e1

发布时间：
2013-11-01

中标分类：
-

国标分类：
-

实施时间：

摘要： This standard covers potable water hygiene systems consisting of valves and fittings, electronic sensors, actuators, and control devices intended to ensure the hygienic transport of potable water and specifies requirements for materials, physical characteristics, performance testing, and marking.