国家锅炉和压力容器检查委员会_国内外标准网文献检索下载

1.[标准] National Board Inspection Code - NBIC, 2007 Edition (Three Volumes)

国家委员会检验规范——NBIC 2007年版（三卷）

发布单位：
美国-国家锅炉和压力容器检查委员会(US-NNBPVV)

标准状态：
历史

标准号：
NBBI NB23-2007

发布时间：
2007-12-31

中标分类：
-

国标分类：
-

实施时间：

摘要： An American National Standard providing rules and guidelines for inservice inspection, repair, and alteration of pressure-retaining items, the National Board Inspection Code (NBIC) is required in many United States and Canadian jurisdictions.Purchase includes 3 years of addenda.Includes 3-Ringer binders with section insert tabs.Includes:Part 1 - InstallationView Contents (PDF)This Part provides requirements and guidance to assure all types of pressure-retaining items are installed and function properly. Installation includes meeting specific safety criteria for construction, materials, design, supports, safety devices, operation, testing, and maintenance. (126 pages)Part 2 - InspectionView Contents (PDF)This Part provides information and guidance needed to perform and document inspections for all types of pressure-retaining items. This Part includes information on personnel safety, non-destructive examination, tests, failure mechanisms, types of pressure equipment, fitness for service, risk-based assessments, and performance based standards. (300 pages)Part 3 - Repairs and AlterationsView Contents (PDF)This Part provides information and guidance to perform, verify, and document acceptable repairs or alterations to pressure-retaining items regardless of code of construction. Alternative methods for examination, testing, heat treatment, etc. are provided when the original code of construction requirments cannot be met. Specific acceptable and proven repair methods are also provided. (250 pages)NEW!The 2007 NBIC is now available on a compact, seachable USBflash drive.Single price includes up to five users as well as three years of addenda. Each addendum will be sent on separate, annually updated flash drives incorporatingallchanges.Regarding CD-ROM Format:Once again the NBIC is available on a compact, searchable, easy-to-store disk that can be accessed by up to five users on one network. Single price includes three years of addenda on separate, annually updated disks incorporating all changes.Below are some commonly asked questions concerning the "new" NBIC:Which part or parts of the NBIC are necessary for "R," "NR," and "VR" certificate holders to have in their possession?- Parts 1, 2, and 3.What is required when an accredited repair organization changes its scope or location from that listed on its Certificate of Authorization?- The QC Manual must be revised and accepted by the Authorized Inspection Agency (AIA). A revised application form (NB-12) must be submitted to the National Board.What is required if the AIA of record has changed?- Proof acknowledging a new AIA agreement must be submitted to the National Board.When performing a pressure test of a repair or alteration (excluding re-rating), is it permissible to isolate the repaired or altered area such that the remaining parts of the pressure-retaining item are not subjected to pressure?- Yes.Are repair methods not specifically identified in the NBIC allowed to be used by repair organizations?- Yes, provided concurrence of the inspector and jurisdiction is obtained.Should the jurisdiction be contacted when the original manufacturer's name plate or stamping is determined during an inservice inspection to be lost or illegible?- Yes. Form NB-136 must be used for this purpose, but only ASME can authorize the restamping of ASME code symbols.Do references to other codes or standards in the NBIC imply acceptance for use?- No. Each jurisdiction retains the responsibility to decide which codes or standards are adopted for use.
2.[标准] National Board Inspection Code - NBIC, 2007 Edition - Part 1 - Installation

国家委员会检验规范-NBIC 2007版-第1部分-安装

发布单位：
美国-国家锅炉和压力容器检查委员会(US-NNBPVV)

标准状态：
历史

标准号：
NBBI NB23-2007 Part 1

发布时间：
2007-12-31

中标分类：
-

国标分类：
-

实施时间：

摘要： This Part provides requirements and guidance to assure all types of pressure-retaining items are installed and function properly. Installation includes meeting specific safety criteria for construction, materials, design, supports, safety devices, operation, testing, and maintenance.Includes 3 years of addenda.Includes 3-Ring Binder with section insert tabs.
3.[标准] National Board Inspection Code - NBIC, 2007 Edition - Part 3 - Repairs and Alterations

国家委员会检验规范——NBIC 2007年版——第3部分——修理和改造

发布单位：
美国-国家锅炉和压力容器检查委员会(US-NNBPVV)

标准状态：
历史

标准号：
NBBI NB23-2007 Part 3

发布时间：
2007-12-31

中标分类：
-

国标分类：
-

实施时间：

摘要： This Part provides information and guidance to perform, verify, and document acceptable repairs or alterations to pressure-retaining items regardless of code of construction. Alternative methods for examination, testing, heat treatment, etc. are provided when the original code of construction requirments cannot be met. Specific acceptable and proven repair methods are also provided.Includes 3 years of addenda.Includes 3-Ring Binder with section insert tabs.
4.[标准] National Board Inspection Code - NBIC, 2007 Edition - Part 2 - Inspection

国家委员会检验规范——NBIC 2007年版——第2部分——检验

发布单位：
美国-国家锅炉和压力容器检查委员会(US-NNBPVV)

标准状态：
历史

标准号：
NBBI NB23-2007 Part 2

发布时间：
2007-12-31

中标分类：
-

国标分类：
-

实施时间：

摘要： This Part provides information and guidance needed to perform and document inspections for all types of pressure-retaining items. This Part includes information on personnel safety, non-destructive examination, tests, failure mechanisms, types of pressure equipment, fitness for service, risk-based assessments, and performance based standards.Includes 3 years of addenda.Includes 3-Ring Binder with section insert tabs.