涂料涂覆工艺_国内外标准网文献检索下载

1.[标准] 热敏基材用低温固化粉末涂料

发布单位：
中国-团体标准(CN-TUANTI)

标准状态：
未生效

标准号：
T/CSTM 00974-2024

发布时间：
2024-02-29

中标分类：
G 化工

国标分类：
87.020 涂料和颜料工业 - 涂料涂覆工艺

实施时间：
2024-05-29

摘要：范围:本文件规定了热敏基材用低温固化粉末涂料的分类、要求、试验方法、检测规则以及标志、包装、运输和贮存等内容。本文件适用于以树脂、固化剂、颜料、填料和助剂等组成的以低温加热固化方式应用于热敏基材涂覆的粉末状涂料产品。本文件不适用于采用电子束、紫外光等固化方式的粉末涂料产品;主要技术内容:本文件规定了热敏基材用低温固化粉末涂料的分类、要求、试验方法、检测规则以及标志、包装、运输和贮存等内容。本文件适用于以树脂、固化剂、颜料、填料和助剂等组成的以低温加热固化方式应用于热敏基材涂覆的粉末状涂料产品。本文件不适用于采用电子束、紫外光等固化方式的粉末涂料产品
2.[标准] 石窟寺石刻类文物拓印技术规范

发布单位：
中国-河南省地方标准(CN-DB41)

标准状态：
现行

标准号：
DB41/T 2432-2023

发布时间：
2023-06-06

中标分类：
Q18 建材 - 建材产品 - 装修材料

国标分类：
87.020 涂料和颜料工业 - 涂料涂覆工艺

实施时间：
2023-09-05
3.[标准] 液体氟橡胶涂敷脱硫后烟囱耐蚀作业技术规范

发布单位：
中国-国家标准(CN-GB)

标准状态：
现行

标准号：
GB/T 31819-2023

发布时间：
2023-09-07

中标分类：
A29 综合 - 基础标准 - 材料防护

国标分类：
87.020 涂料和颜料工业 - 涂料涂覆工艺

实施时间：
2024-04-01

摘要：本文件规定了液体氟橡胶涂敷脱硫后烟囱耐蚀作业的基层处理、氟橡胶内衬作业、作业安全、材料指标和工程验收要求。
本文件适用于火力发电厂湿法脱硫后新旧钢筋混凝土烟囱、钢烟囱、砖烟囱和其他排烟筒内衬耐蚀材料和作业。
注：氟橡胶内衬作业指液体氟橡胶内衬结构体系作业（A型）、改性液体氟橡胶板材内衬结构体系作业（B型）。

获取标准
4.[标准] 绿色智能居家养老系统设计标准

发布单位：
中国-团体标准(CN-TUANTI)

标准状态：
现行

标准号：
T/CECS 1284-2023

发布时间：
2023-03-10

中标分类：
-

国标分类：
87.020 涂料和颜料工业 - 涂料涂覆工艺

实施时间：
2023-08-01

摘要：主要技术内容:本标准共分8章，主要内容包括：总则、术语、基本规定、系统架构、智能终端层、数据采集运算层、系统平台层、应用服务层
5.[标准] 局部镀涂胶通用规范

发布单位：
中国-团体标准(CN-TUANTI)

标准状态：
现行

标准号：
T/QGCML 2445-2023

发布时间：
2023-12-01

中标分类：
-

国标分类：
87.020 涂料和颜料工业 - 涂料涂覆工艺

实施时间：
2023-12-16

摘要：主要技术内容:本文件规定了局部镀涂胶通用规范的术语和定义、技术要求、镀涂流程、涂覆检验标准及检验要求、人员要求。本文件适用于本规范适用于局部保护电镀产品生产过程检验和涂覆要求
6.[标准] 塑料表面喷涂加工通用要求

发布单位：
中国-团体标准(CN-TUANTI)

标准状态：
现行

标准号：
T/QGCML 651-2023

发布时间：
2023-02-20

中标分类：
-

国标分类：
87.020 涂料和颜料工业 - 涂料涂覆工艺

实施时间：
2023-03-06

摘要：主要技术内容:本标准规定了塑料表面喷涂加工通用要求的术语和定义、表面处理、技术要求、检验方法、检验规则、标志、包装、运输和贮存。本标准适用于塑料表面喷涂加工技术的设计及检验
7.[标准] 特种合成树脂表面处理工艺

发布单位：
中国-团体标准(CN-TUANTI)

标准状态：
现行

标准号：
T/SHDSGY 212-2023

发布时间：
2023-07-28

中标分类：
-

国标分类：
87.020 涂料和颜料工业 - 涂料涂覆工艺

实施时间：
2023-07-28

摘要：主要技术内容:本文件规定了特种合成树脂表面处理工艺的术语和定义、工艺流程、技术要求、试验方法和质量验收。本文件适用于金属、陶瓷表面的涂层处理
8.[标准] Standard Test Method for Determination of Strength of Colorants and Bases for Architectural, Marine, Maintenance, Commercial, and Industrial Coatings

建筑、船舶、维修、商业和工业涂料用着色剂和基底强度测定的标准试验方法

发布单位：
美国-美国材料与试验协会(US-ASTM)

标准状态：
现行

标准号：
ASTM D8163-18(2023)

发布时间：
2023-07-01

中标分类：
-

国标分类：
87.020 涂料和颜料工业 - 涂料涂覆工艺

实施时间：

摘要： 1.1This test method covers the determination of strength of colorant dispersions, colored and white bases, for architectural, marine, maintenance, commercial, and industrial coatings.1.2This test method applies to colorant dispersions and colored and white bases regardless of the methods used to disperse these materials.1.3The resultant test value is in terms of percent strength in which a material stronger than standard is implied by values larger than 100 % and weaker than standard is implied by values less than 100 %. The value of 100 % implies exact strength conformance to the test method.1.4This test method is suitable for the determination of strength when tolerances are set about standards that are prepared either by weight concentration or volume concentration.1.5The test result is empirically determined. The user determines and supplies the standard for strength of the product under test and the test result is relative to that supplied standard.1.6The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined.1.7This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.8This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ======5.1The test method results are suitable for use by manufacturers of colorants and bases for quality control purposes on manufactured product.5.2The test method results are suitable for use by purchasers of colorants and bases for incoming quality control or the determination of money value of colorants and bases.
9.[标准] Standard Practice for Determining the Effect of Overbaking on Organic Coatings

测定过烘烤对有机涂层影响的标准实施规程

发布单位：
美国-美国材料与试验协会(US-ASTM)

标准状态：
现行

标准号：
ASTM D2454-23

发布时间：
2023-02-01

中标分类：
-

国标分类：
87.020 涂料和颜料工业 - 涂料涂覆工艺

实施时间：

摘要： 1.1This practice covers the determination of the time-temperature effect of overbaking on the physical and chemical properties of organic coatings.1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of whoever uses this standard to consult and establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.Specific hazard statements are given in Section7.1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ======5.1Most coatings are designed for a specific baking time and temperature. For a variety of reasons (line stoppages, rerouting back through ovens, oven overheating, etc.) the prescribed time or temperature, or both, of the bake is often exceeded. This practice has been found to be useful in evaluating the effects of overbakes on coatings.
10.[标准] Standard Practice for Evaluation of Aging Resistance of Prestressed Prepainted Metal In a Dry Heat Test

干热试验中预应力预涂金属耐老化性评估的标准实施规程

发布单位：
美国-美国材料与试验协会(US-ASTM)

标准状态：
现行

标准号：
ASTM D6491-09(2023)

发布时间：
2023-03-01

中标分类：
-

国标分类：
87.020 涂料和颜料工业 - 涂料涂覆工艺

实施时间：

摘要： 1.1This practice can be used to evaluate the resistance of a prestressed prepainted metal panel to cracking, or loss of adhesion, or both, after accelerated heat aging. Most coil coated products are formed and bent into specific shapes to produce a final product. These operations introduce stresses, which may be relieved by cracking of the coating after aging.1.2The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
11.[标准] Standard Practices for Preparation of Magnesium Alloy Surfaces for Painting

涂装用镁合金表面处理的标准实施规程

发布单位：
美国-美国材料与试验协会(US-ASTM)

标准状态：
现行

标准号：
ASTM D1732-03(2023)

发布时间：
2023-11-01

中标分类：
-

国标分类：
87.020 涂料和颜料工业 - 涂料涂覆工艺

实施时间：

摘要： 1.1These practices cover two classes of treatment for preparation of magnesium alloy surfaces for painting, as follows:Class I—Chemical Treatments.Class II—Anodic Treatments.In general, the latter treatments are the more protective of the two classes. Mechanical (abrasive) treatments, solvent cleaning, alkaline solution treatments, and acid pickles not resulting in protective conversion coatings are suitable preliminary treatments only for metal to be exposed under mildly corrosive (indoor) exposures. When a high degree of corrosion protection and paint adhesion are desired, as in many outdoor environments, surface preparation by one of the above conversion-coat classes is necessary. The hexavalent chromium based methods given are not recommended as hexavalent chromium is a known carcinogen.Note 1:Testing of Coatings—Quality control tests of coatings are frequently desirable, and these generally consist of exposures, with or without paint, to salt spray, humidity, or natural environments, with suitable procedures for assessing the degree of breakdown suffered after fixed time intervals. It is recommended that quality control tests of coatings shall be made as far as possible with high-purity material (for example AZ31A alloy),2the inherent corrosion rate of which is relatively consistent from batch to batch and that precautions shall be taken to remove surface contamination before coatings are applied. Such contamination shall be removed by acid pickling to a depth of at least 0.001 in. (25 μm) per side.1.2This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. (SeeNote 11.)1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
12.[标准] Standard Test Method for Acid and Mortar Resistance of Factory-Applied Clear Coatings on Extruded Aluminum Products

挤压铝制品上工厂用透明涂层耐酸性和耐灰浆性的标准试验方法

发布单位：
美国-美国材料与试验协会(US-ASTM)

标准状态：
现行

标准号：
ASTM D3260-01(2023)

发布时间：
2023-06-01

中标分类：
-

国标分类：
87.020 涂料和颜料工业 - 涂料涂覆工艺

实施时间：

摘要： 1.1This test method covers the evaluation of the mortar and acid resistance of clear protective coating factory applied to extruded aluminum substrates.1.2The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ======4.1This test method will provide differentiation between types of coatings for acid and motor resistance providing the coating is applied in a uniform continuous film with a specified film thickness.
13.[标准] Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints—Weight Basis

汽车涂料喷涂生产条件下传递效率测定的标准试验方法

发布单位：
美国-美国材料与试验协会(US-ASTM)

标准状态：
现行

标准号：
ASTM D5066-91(2023)

发布时间：
2023-06-01

中标分类：
-

国标分类：
87.020 涂料和颜料工业 - 涂料涂覆工艺

实施时间：

摘要： 1.1This test method covers procedures for determination of the transfer efficiency (using a weight method) under production conditions for in-plant spray application of automotive paints as outlined in Section 18 of EPA 450/3-88-018.1.2The transfer efficiency is calculated from the weight of the paint solids sprayed and that deposited on the painted part. The recommended approach involves painting the part directly. Also described is an alternative approach for painting parts covered with aluminum foil.1.3The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.Specific hazard statements are given in10.1.8.1.1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ======5.1This test method is specifically directed at the spray painting of automobile car and light duty truck bodies. The general principles are applicable to the painting of other automotive parts.5.2This test method may also be used to measure transfer efficiency in full-sized painting facilities simulating production conditions and operations.
14.[标准] Standard Guide for Preparation, Maintenance, and Distribution of Physical Product Standards for Color and Geometric Appearance of Coatings

涂层颜色和几何外观物理产品标准的制备、维护和分发的标准指南

发布单位：
美国-美国材料与试验协会(US-ASTM)

标准状态：
现行

标准号：
ASTM D5531-17(2023)

发布时间：
2023-07-01

中标分类：
-

国标分类：
87.020 涂料和颜料工业 - 涂料涂覆工艺

实施时间：

摘要： 1.1This guide covers three levels of physical product standards for color or appearance, or both, commonly used in the coatings industry, provides terminology to describe each level, and describes techniques for generating and caring for standards.1.2The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ======5.1High quality physical product standards for color or appearance are the keystone of a successful color control program. Standards are often grouped into three major categories: product standards, intermediate production control standards, and instrument standards. This guide deals only with physical product standards. Some instrument-based color control programs use “numerical standards,” derived from instrumental measurements of a physical product standard.
15.[标准] Standard Practice for Qualification of Coating Applicators for Application of Coatings to Concrete Surfaces

混凝土表面涂层涂敷器的评定标准实施规程

发布单位：
美国-美国材料与试验协会(US-ASTM)

标准状态：
现行

标准号：
ASTM D4227-05(2023)

发布时间：
2023-04-01

中标分类：
-

国标分类：
87.020 涂料和颜料工业 - 涂料涂覆工艺

实施时间：

摘要： 1.1This practice provides a standard qualifying method for coating applicators to verify their proficiency and ability to attain the required quality for application of specified coatings to concrete surfaces including those in safety-related areas in a nuclear facility.1.2Variations or simplifications of the practice set forth herein may be appropriate for special coating work such as maintenance. It is not the intent of this practice to mandate a singular basis for all qualifications.1.3Evaluation of the coating applicator being qualified in accordance with this practice, shall be by qualified agents as specified in4.1. Reports shall be prepared as specified in Section5, and qualification as specified in Section6.1.4It is the intent of this practice to judge only the ability of the coating applicator to apply specified coatings with the proper tools and equipment.1.5The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.7This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
16.[标准] Standard Practice for Qualification of Coating Applicators for Application of Coatings to Steel Surfaces

钢表面涂层涂敷器评定的标准实施规程

发布单位：
美国-美国材料与试验协会(US-ASTM)

标准状态：
现行

标准号：
ASTM D4228-05(2023)

发布时间：
2023-04-01

中标分类：
-

国标分类：
87.020 涂料和颜料工业 - 涂料涂覆工艺

实施时间：

摘要： 1.1This practice provides a standard qualifying method for coating applicators to verify their proficiency and ability to attain the required quality for application of specified coatings to steel surfaces including those in safety-related areas in a nuclear facility.1.2Variations or simplifications of the practice set forth herein may be appropriate for special coating work such as maintenance or qualifications of equipment suppliers shop personnel. It is not the intent of this practice to mandate a singular basis for all qualifications.1.3Evaluation of the coating applicator being qualified in accordance with this practice, shall be by qualified agents as specified in4.1. Reports shall be prepared as specified in Section5, and certification as specified in Section6.1.4It is the intent of this practice to judge only the ability of the coating applicator to apply specified coatings with the proper tools and equipment.1.5The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.7This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
17.[标准] 도료와 바니시 — 보호 도료 시스템을 이용한 강철 구조물의 방식 — 거친 표면에서 건조 도막 두께의 측정 및 수용 기준

色漆和清漆防护涂料体系对钢结构的腐蚀防护粗糙表面干膜厚度的测量和验收标准

发布单位：
韩国-韩国标准(KR-KS)

标准状态：
现行

标准号：
KS M ISO 19840-2023

发布时间：
2023-12-15

中标分类：
-

国标分类：
87.020 涂料和颜料工业 - 涂料涂覆工艺

实施时间：

摘要： 이 표준은 사용한 측정기 조정, 검사 영역의 정의, 시료 채취 계획, 측정 방법, 수용/거절 기준을 포함하며, 거친 표면에서 지정 건조 도막 두께를 검증하는 절차에 대하여 규정한다.
18.[标准] 도료와 바니시 — 방식도료 시스템에 의한 강철 구조물의 부식 방지 — 제5부: 방식도료 시스템

色漆和清漆防护涂料体系对钢结构的腐蚀防护第5部分:防护涂料体系

发布单位：
韩国-韩国标准(KR-KS)

标准状态：
现行

标准号：
KS M ISO 12944-5-2023

发布时间：
2023-11-07

中标分类：
-

国标分类：
87.020 涂料和颜料工业 - 涂料涂覆工艺

实施时间：

摘要： 이 표준은 강철 구조물의 부식 방지를 위해 일반적으로 사용되는 도료와 도료 시스템의 유형에 대하여 설명한다.
19.[标准] 방식 도료 시스템을 이용한 강철 구조물의 부식 방지 — 도막의 부착력/응집력 (파단 강도) 평가와 허용 기준 — 제1부: 부착 박리 시험

保护涂料体系对钢结构的腐蚀防护涂层附着力/内聚力（断裂强度）的评估和验收标准第1部分:剥离试验

发布单位：
韩国-韩国标准(KR-KS)

标准状态：
现行

标准号：
KS M ISO 16276-1-2023

发布时间：
2023-12-15

中标分类：
-

国标分类：
87.020 涂料和颜料工业 - 涂料涂覆工艺

实施时间：

摘要： 이 표준은 두께가 10 mm 이상인 강철 소지에 도장한 방식 도료 도막의 파단 강도를 평가하는 절차에 대하여 규정한다.
20.[标准] 방식 도료 시스템을 이용한 강철 구조물의 부식 방지 — 도막의 부착력/응집력 (파단 강도) 평가와 허용 기준 — 제2부: 크로스컷 시험과 X컷 시험

防护涂料体系对钢结构的腐蚀防护涂层附着力/内聚力（断裂强度）的评定和验收标准第2部分:横截面试验和X截面试验

发布单位：
韩国-韩国标准(KR-KS)

标准状态：
现行

标准号：
KS M ISO 16276-2-2023

发布时间：
2023-12-15

中标分类：
-

国标分类：
87.020 涂料和颜料工业 - 涂料涂覆工艺

实施时间：

摘要： 이 표준은 도막을 소지까지 직각 격자 무늬 형태(크로스컷) 또는 X형태(X컷)로 잘랐을 때 도장 시스템의 저항성 등급을 결정하는 절차에 대하여 규정한다.