纸生产工艺_国内外标准网文献检索下载

1.[标准] 再生纸产品碳足迹量化评价与通报指南

发布单位：
中国-团体标准(CN-TUANTI)

标准状态：
现行

标准号：
T/ZGZS 0405-2024

发布时间：
2024-03-08

中标分类：
Y04 轻工、文化与生活用品 - 轻工、文化与生活用品综合 - 基础标准与通用方法

国标分类：
85.020 造纸技术 - 纸生产工艺

实施时间：
2024-03-08

摘要：主要技术内容:范围；规范性引用文件；术语与定义；评价原则；评价目标与内容；评价方法；数据；碳足迹计算程序；结果通报
2.[标准] Notificazione – decisione di restituzione

通知–退货决定

发布单位：
瑞士-瑞士技术法规(CH-LEX)

标准状态：

标准号：
FF 2022 1162

发布时间：
2022-05-17

中标分类：
A20/39 综合 - 基础标准

国标分类：
85.020 造纸技术 - 纸生产工艺

实施时间：
3.[标准] Notificazione – decisione di restituzione

通知–退货决定

发布单位：
瑞士-瑞士技术法规(CH-LEX)

标准状态：

标准号：
FF 2022 128

发布时间：
2022-01-19

中标分类：
A20/39 综合 - 基础标准

国标分类：
85.020 造纸技术 - 纸生产工艺

实施时间：
4.[标准] Notificazione – decisione di restituzione

通知–退货决定

发布单位：
瑞士-瑞士技术法规(CH-LEX)

标准状态：

标准号：
FF 2021 2989

发布时间：
2021-12-27

中标分类：
A20/39 综合 - 基础标准

国标分类：
85.020 造纸技术 - 纸生产工艺

实施时间：
5.[标准] Notificazione – decisione di restituzione

通知–退货决定

发布单位：
瑞士-瑞士技术法规(CH-LEX)

标准状态：

标准号：
FF 2021 2744

发布时间：
2021-11-30

中标分类：
A20/39 综合 - 基础标准

国标分类：
85.020 造纸技术 - 纸生产工艺

实施时间：
6.[标准] Notificazione – decisione di restituzione

通知–退货决定

发布单位：
瑞士-瑞士技术法规(CH-LEX)

标准状态：

标准号：
FF 2021 2745

发布时间：
2021-11-30

中标分类：
A20/39 综合 - 基础标准

国标分类：
85.020 造纸技术 - 纸生产工艺

实施时间：
7.[标准] Notificazione – decisione di restituzione

通知–退货决定

发布单位：
瑞士-瑞士技术法规(CH-LEX)

标准状态：

标准号：
FF 2021 2743

发布时间：
2021-11-30

中标分类：
A20/39 综合 - 基础标准

国标分类：
85.020 造纸技术 - 纸生产工艺

实施时间：
8.[标准] Standard Practice for Evaluation of Fungal Control Agents as Preservatives for Aqueous-Based Products Used in the Paper Industry

用于造纸工业的水性产品防腐剂的真菌控制剂的评价标准实践

发布单位：
美国-美国材料与试验协会(US-ASTM)

标准状态：
现行

标准号：
ASTM E875-20

发布时间：
2020-10-01

中标分类：
-

国标分类：
85.020 造纸技术 - 纸生产工艺

实施时间：

摘要： 1.1This laboratory practice is used to determine the efficacy of a fungal control agent to prevent spoilage of in-process aqueous-based products used in the paper industry.1.2For information on bacterial control agents, see Test MethodE723.1.3It is the responsibility of the investigator to determine whether good laboratory practices (GLP) are required and to follow them when appropriate (see 40 CFR 160).1.4A knowledge of microbiological techniques is required for these procedures.1.5The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.7This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ======5.1This practice should be used to determine if a fungal control agent is effective to preserve pigment suspensions, dye solutions, pulp slurries, starch solutions, polymers, sizing agents, latex emulsions, and other specific aqueous-based materials used in the paper industry. Separate evaluations should be made on a representative type for each specific class of product to be preserved.Note 1:Control of bacterial spoilage of similar products can be evaluated by Test MethodE723.Note 2:Slimicides for control of fungal or bacterial slime can be evaluated by Test MethodE1839.
9.[标准] Standard Practice for Efficacy of Slimicides for the Paper Industry#x2014;Bacterial and Fungal Slime

造纸工业用杀粘剂效力的标准实施规程&x2014；细菌和真菌粘液

发布单位：
美国-美国材料与试验协会(US-ASTM)

标准状态：
现行

标准号：
ASTM E1839-20

发布时间：
2020-01-01

中标分类：
-

国标分类：
11.080.20 消毒和灭菌 - 消毒剂和防腐剂

85.020 造纸技术 - 纸生产工艺

实施时间：

摘要： 1.1This practice presents a procedure to evaluate the efficacy of slimicides for the control of bacterial and fungal slimes in paper mill systems and their counterparts.1.2It is the responsibility of the investigator to determine whether Good Laboratory Practices (GLP) are required and to follow them where appropriate (40 CFR 160).1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ======5.1This practice is to be used to determine if a slime control agent has application in the paper industry for control of bacterial or fungal slime/biofilm.5.2This practice is run in acid, alkaline, or acid and alkaline conditions to determine the efficacy of the slime control agent.5.3The test conditions may be modified to reflect intended use patterns in typical paper mill systems, including use of actual paper mill furnish.
10.[标准] Standard Practice for Evaluation of Antimicrobials as Preservatives for Aqueous-Based Products Used in the Paper Industry (Bacterial Spoilage)

造纸工业用水基产品防腐剂用抗菌剂评定的标准实施规程（细菌腐败）

发布单位：
美国-美国材料与试验协会(US-ASTM)

标准状态：
现行

标准号：
ASTM E723-13(2019)

发布时间：
2019-10-01

中标分类：
-

国标分类：
85.020 造纸技术 - 纸生产工艺

实施时间：

摘要： 1.1This laboratory practice is used to determine the efficacy of an antimicrobial for preventing bacterial spoilage of in-process aqueous-based products used in the paper industry. For information on fungal spoilage, see Test MethodE875. This practice should be performed by persons who have had basic microbiological training.1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.(See 40 CFR Part 160.)1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ======5.1This practice should be used to determine if an antimicrobial preserves pigment suspensions, dye solutions, pulp slurries, starch solutions, polymers, sizing agents, latex emulsions, and other aqueous-based materials used in the paper industry from bacterial spoilage.Note 1:Control of fungal spoilage of similar products can be evaluated by Test MethodE875.Note 2:Slimicides for control of fungal or bacterial slime can be evaluated by Test MethodE1839.
11.[标准] Paper, board and pulps — General requirements for the competence of laboratories authorized for the issue of optical reference transfer standards of level 3

纸纸板和纸浆 - 授权发布光学参考转移标准3级的实验室的能力的一般要求

发布单位：
国际组织-国际标准化组织(IX-ISO)

标准状态：
现行

标准号：
ISO 4094:2017

发布时间：
2017-12-04

中标分类：
-

国标分类：
85.020 造纸技术 - 纸生产工艺

85.040 造纸技术 - 纸浆

85.060 造纸技术 - 纸和纸板

实施时间：

摘要： ISO 4094:2017 provides both general requirements and specific requirements (Annex A) for laboratories seeking to become "Authorized Laboratories (ALs)" and to maintain their Authorized Laboratory status for the issue of optical reference transfer standards of level 3. This document follows the requirements and adopts the format of ISO/IEC 17025, with the aims of:a) establishing and maintaining international optical reference transfer standards of level 2 (IR2) traceable to an international optical reference primary standard of level 1 (IR1) maintained by a standardizing laboratory;b) distributing traceability required to achieve inter-laboratory agreement in the results of test methods specified in International Standards for optical properties of paper, board or pulp;c) participating in the design and development of new methods and international harmonization of procedures.When a laboratory does not undertake one or more of the activities covered by this document, such as sampling and the design/development of new methods, the requirements of those clauses do not apply.ISO 4094:2017 is for use by specified laboratories authorized to issue optical reference transfer standards in developing their management system for quality, administrative and technical operations. Laboratory customers, regulatory authorities and accreditation bodies can also use it in confirming or recognizing the competence of laboratories.NOTE It might be necessary to explain or interpret certain requirements in this document to ensure that the requirements are applied in a consistent manner. Guidance for consistent application can be obtained from Technical Committee ISO/TC 6.
12.[标准] Paper, board, pulps and related terms — Vocabulary — Part 1: Alphabetical index

纸板纸和相关 - 条款声明第1部分:字体索引

发布单位：
国际组织-国际标准化组织(IX-ISO)

标准状态：
现行

标准号：
ISO 4046-1:2016

发布时间：
2016-03-09

中标分类：
-

国标分类：
85.020 造纸技术 - 纸生产工艺

85.040 造纸技术 - 纸浆

01.040.85 词汇 - 造纸技术 (词汇)

85.060 造纸技术 - 纸和纸板

实施时间：

摘要： ISO 4046-1:2016 is an alphabetical index of English and French terms which are defined in the ISO 4046 series of standards, which document the terminology of paper, board, pulp and related terms.
13.[标准] Paper, board, pulps and related terms — Vocabulary — Part 3: Paper-making terminology

纸纸纸浆和相关术语 - 词汇 - 第3部分:造纸术语

发布单位：
国际组织-国际标准化组织(IX-ISO)

标准状态：
现行

标准号：
ISO 4046-3:2016

发布时间：
2016-03-09

中标分类：
-

国标分类：
85.020 造纸技术 - 纸生产工艺

01.040.85 词汇 - 造纸技术 (词汇)

实施时间：

摘要： ISO 4046-3:2016 defines terms related to paper making, in both English and French.
14.[标准] Standard Practice for Evaluation of Fungal Control Agents as Preservatives for Aqueous-Based Products Used in the Paper Industry

用于造纸工业的水性产品防腐剂的真菌控制剂的评价标准实践

发布单位：
美国-美国材料与试验协会(US-ASTM)

标准状态：
历史

标准号：
ASTM E875-15

发布时间：
2015-05-01

中标分类：
-

国标分类：
85.020 造纸技术 - 纸生产工艺

实施时间：

摘要： 1.1This laboratory practice is used to determine the efficacy of a fungal control agent to prevent spoilage of in-process aqueous-based products used in the paper industry.1.2For information on bacterial control agents, see Test MethodE723.1.3It is the responsibility of the investigator to determine whether good laboratory practices (GLP) are required and to follow them when appropriate (see 40 CFR 160).1.4A knowledge of microbiological techniques is required for these procedures.1.5The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. ====== Significance And Use ======5.1This practice should be used to determine if a fungal control agent is effective to preserve pigment suspensions, dye solutions, pulp slurries, starch solutions, polymers, sizing agents, latex emulsions, and other specific aqueous-based materials used in the paper industry. Separate evaluations should be made on a representative type for each specific class of product to be preserved.Note 1:Control of bacterial spoilage of similar products can be evaluated by Test MethodE723.Note 2:Slimicides for control of fungal or bacterial slime can be evaluated by Test MethodE1839.
15.[标准] 古籍印刷连四纸

发布单位：
中国-江西省地方标准(CN-DB36)

标准状态：
作废

标准号：
DB36/T 703-2013

发布时间：
2013-02-01

中标分类：
Y30 轻工、文化与生活用品 - 造纸 - 造纸综合

国标分类：
85.020 造纸技术 - 纸生产工艺

实施时间：
2013-05-01
16.[标准] Standard Practice for Evaluation of Antimicrobials as Preservatives for Aqueous-Based Products Used in the Paper Industry (Bacterial Spoilage)

造纸工业用水基产品防腐剂用抗菌剂评定的标准实施规程（细菌腐败）

发布单位：
美国-美国材料与试验协会(US-ASTM)

标准状态：
历史

标准号：
ASTM E723-13

发布时间：
2013-04-01

中标分类：
-

国标分类：
85.020 造纸技术 - 纸生产工艺

实施时间：

摘要： 1.1 This laboratory practice is used to determine the efficacy of an antimicrobial for preventing bacterial spoilage of in-process aqueous-based products used in the paper industry. For information on fungal spoilage, see Test MethodE875. This practice should be performed by persons who have had basic microbiological training.1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.(See 40 CFR Part 160.) ====== Significance And Use ======5.1 This practice should be used to determine if an antimicrobial preserves pigment suspensions, dye solutions, pulp slurries, starch solutions, polymers, sizing agents, latex emulsions, and other aqueous-based materials used in the paper industry from bacterial spoilage.Note 1—Control of fungal spoilage of similar products can be evaluated by Test MethodE875.Note 2—Slimicides for control of fungal or bacterial slime can be evaluated by Test MethodE1839.
17.[标准] Standard Test Method for Efficacy of Slimicides for the Paper Industrymdash;Bacterial and Fungal Slime

造纸工业杀菌剂功效的标准试验方法

发布单位：
美国-美国材料与试验协会(US-ASTM)

标准状态：
历史

标准号：
ASTM E1839-13

发布时间：
2013-04-01

中标分类：
-

国标分类：
11.080.20 消毒和灭菌 - 消毒剂和防腐剂

85.020 造纸技术 - 纸生产工艺

实施时间：

摘要： 1.1 This test method presents a procedure to evaluate the efficacy of slimicides for the control of bacterial and fungal slimes in paper mill systems and their counterparts.1.2 It is the responsibility of the investigator to determine whether Good Laboratory Practices (GLP) are required and to follow them where appropriate (40 CFR 160).1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. ====== Significance And Use ======5.1 This test method is to be used to determine if a slime control agent has application in the paper industry for control of bacterial or fungal slime/biofilm.5.2 This test method is run in acid, alkaline, or acid and alkaline conditions to determine the efficacy of the slime control agent.5.3 The test conditions may be modified to reflect intended use patterns in typical paper mill systems, including use of actual paper mill furnish.
18.[标准] 进出口纸制用品检验规程第2部分：纸手帕纸巾

发布单位：
中国-行业标准-商品检验(CN-SN)

标准状态：
现行

标准号：
SN/T 3250.2-2012

发布时间：
2012-10-23

中标分类：
Y33 轻工、文化与生活用品 - 造纸 - 纸制品

国标分类：
85.020 造纸技术 - 纸生产工艺

实施时间：
2013-05-01
19.[标准] 防伪纸第1部分：防涂改纸

发布单位：
中国-国家标准(CN-GB)

标准状态：
现行

标准号：
GB/T 17003.1-2011

发布时间：
2011-12-30

中标分类：
Y32 轻工、文化与生活用品 - 造纸 - 纸

国标分类：
85.020 造纸技术 - 纸生产工艺

实施时间：
2012-05-01

摘要： GB/T 17003的本部分规定了防涂改纸的术语和定义，要求，试验方法，检验规则，标志、包装、运输、贮存和安全措施，环保、卫生要求。
本部分适用于存单、支票、证件、保密文件等需要防化学涂改功能的纸。

获取标准
20.[标准] Standard Test Method for Efficacy of Fungal Control Agents as Preservatives for Aqueous-Based Products Used in the Paper Industry

造纸工业中用作水性产品防腐剂的真菌控制剂效力的标准试验方法

发布单位：
美国-美国材料与试验协会(US-ASTM)

标准状态：
历史

标准号：
ASTM E875-10

发布时间：
2010-04-01

中标分类：
-

国标分类：
85.020 造纸技术 - 纸生产工艺

实施时间：

摘要： 1.1 This laboratory test method is used to determine the efficacy of a fungal control agent to prevent spoilage of in-process aqueous-based products used in the paper industry.1.2 For information on bacterial control agents, see Test MethodE723.1.3 It is the responsibility of the investigator to determine whether good laboratory practices (GLP) are required and to follow them when appropriate (see 40 CFR 160).1.4 A knowledge of microbiological techniques is required for these procedures.1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. ====== Significance And Use ======This test method should be used to determine if a fungal control agent is effective to preserve pigment suspensions, dye solutions, pulp slurries, starch solutions, polymers, sizing agents, latex emulsions, and other specific aqueous-based materials used in the paper industry. Separate evaluations should be made on a representative type for each specific class of product to be preserved.Note1—Control of bacterial spoilage of similar products can be evaluated by Test MethodE723.Note2—Slimicides for control of fungal or bacterial slime can be evaluated by Test MethodE1839.