箱、盒、板条箱_国内外标准网文献检索下载

1.[标准] 绿色产品评价　物流周转箱

发布单位：
中国-国家标准(CN-GB)

标准状态：
现行

标准号：
GB/T 43802-2024

发布时间：
2024-03-15

中标分类：
A82 包装材料与容器

国标分类：
55.160 箱、盒、板条箱

实施时间：
2024-07-01

摘要：本文件规定了物流周转箱绿色产品的评价要求和评价方法。
本文件适用于物流中使用的塑料周转箱的绿色产品评价。

获取标准
2.[标准] 蜂窝纸板箱

发布单位：
中国-国家标准(CN-GB)

标准状态：
现行

标准号：
GB/T 31269-2023

发布时间：
2023-05-23

中标分类：
A82 综合 - 标志、包装、运输、贮存 - 包装材料与容器

国标分类：
55.160 货物的包装和调运 - 箱、盒、板条箱

实施时间：
2023-05-23

摘要：本文件规定了蜂窝纸板箱的分类与基本箱型、要求、检验与试验、检验规则、标志、包装、运输和贮存。本文件适用于蜂窝纸板箱的设计、生产制造与检验。

获取标准
3.[标准] 商贸物流载具循环共用管理规范

发布单位：
中国-团体标准(CN-TUANTI)

标准状态：
现行

标准号：
T/SDAS 687-2023

发布时间：
2023-08-15

中标分类：
-

国标分类：
55.160 货物的包装和调运 - 箱、盒、板条箱

实施时间：
2023-08-22

摘要：主要技术内容:本文件规定了商贸物流载具循环共用的总体要求、参与方要求、商贸物流载具管理要求、作业管理要求、信息管理要求及评价与改进。本文件适用于商贸物流载具循环共用的管理，商贸物流载具包括托盘、周转箱等
4.[标准] 高强度瓦楞纸板箱

发布单位：
中国-团体标准(CN-TUANTI)

标准状态：
现行

标准号：
T/QGCML 2488-2023

发布时间：
2023-12-06

中标分类：
-

国标分类：
55.160 货物的包装和调运 - 箱、盒、板条箱

实施时间：
2023-12-21

摘要：主要技术内容:本文件规定了高强度瓦楞纸板箱的产品结构、原材料、要求、试验方法、检验规则、标志、包装、运输和贮存。本文件适用于高强度瓦楞纸板箱的生产和检验
5.[标准] Standard Test Method for Determining Dimensions of Fiberboard Boxes

纤维板箱尺寸测定的标准试验方法

发布单位：
美国-美国材料与试验协会(US-ASTM)

标准状态：
现行

标准号：
ASTM D2658-18(2023)

发布时间：
2023-03-15

中标分类：
-

国标分类：
55.160 货物的包装和调运 - 箱、盒、板条箱

实施时间：

摘要： 1.1This test method covers the determination of the interior and exterior dimensions of regular slotted or special slotted styles of single-wall corrugated, double-wall corrugated and solid fiberboard boxes.1.2The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ======4.1Dimensions are important properties in the general construction of a box, and accurate methods of measurement are required for research work, routine control, and acceptance testing for conformance to specifications. For packages to carry and protect their contents effectively and efficiently, boxes and interior components must be properly and consistently sized. Correctly dimensioned and well-made boxes can be more easily set up by hand or be erected using automatic equipment. “Square” boxes (rectangular parallelepipeds) will stack better to accept load and improve stability during storage and shipment.4.1.1Interior dimensions of boxes are critical when the contents of the box are intended to fill or nearly fill the box with little unused side and head space. The inside dimension by tape method are the size values most often cited in box design (see9.1, and TAPPI T827). The interior size of a box can be estimated from the score to score measurements when the scoring allowance is taken into account (seeAppendix X2). The actual inside dimensions can be measured directly using the box gauge method (see9.2). Either method can be used to measure interior box dimensions.4.1.2Exterior dimensions may be the critical design criteria when attempting to optimize use of the shipping platform area and overall stack height based on transportation and storage limitations. Exterior dimensions are also key design elements when making common footprint boxes.5The exterior dimensions of a box can be measured directly using the exterior dimensions by tape method (seeAppendix X1).4.2Measuring a Lot Quantity of Boxes—This method determines if a lot (that is, production run) is within specified tolerance for each dimension (length, width, and depth as are shown in PracticeD5118/D5118M). A minimum of five specimens are measured. The test result for each dimension is the individual measurements of that dimension on all specimens (see9.3).4.3Measuring Single Boxes—Determines if one particular box is within specified tolerance for each dimension. The test result for each dimension is the average of all measurements of that dimension (see9.4).
6.[标准] Standard Specification for Wood-Cleated Panelboard Shipping Boxes

木夹板装运箱的标准规范

发布单位：
美国-美国材料与试验协会(US-ASTM)

标准状态：
现行

标准号：
ASTM D6251/D6251M-23

发布时间：
2023-10-01

中标分类：
-

国标分类：
55.160 货物的包装和调运 - 箱、盒、板条箱

实施时间：

摘要： 1.1This specification covers the fabrication and closure of empty and full wood-cleated, hereafter referred to as wood-cleated, panelboard boxes. These boxes are intended for use as containers for domestic and overseas shipment of general materials and supplies, not exceeding 1000 lb [454 kg] depending on box type (see10.1).1.2Wood-cleated panelboard shipping box performance is dependent on its fabricated components and subsequent assembly; therefore, a variety of types, classes, styles, and treatments reflecting varied performance are specified. This specification, however, does not cover wood-cleated panelboard box performance under all atmospheric, handling, shipping, and storage conditions.1.3If the use of other construction methods or techniques is acceptable and permitted (see5.1.17), the resulting packaging systems shall be of equal or better performance than would result from the use of these specified materials and procedures. The appropriate distribution cycle, specified in PracticeD4169, can be used to develop comparative procedures and criteria.1.4The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. SeeIEEE/ASTM SI 10for conversion of units.1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
7.[标准] 绿色产品评价物流周转箱

发布单位：
中国-国家标准计划(CN-PLAN)

标准状态：
正在起草

标准号：
20220427-T-469

发布时间：
2022-07-19

中标分类：
-

国标分类：
55.160 货物的包装和调运 - 箱、盒、板条箱

实施时间：
8.[标准] 柔印瓦楞纸箱生产技术规范

发布单位：
中国-团体标准(CN-TUANTI)

标准状态：
现行

标准号：
T/ZS 0445-2022

发布时间：
2022-12-25

中标分类：
Y 轻工、文化与生活用品

国标分类：
55.160 货物的包装和调运 - 箱、盒、板条箱

实施时间：
2022-12-31

摘要：主要技术内容:前言1 范围2 规范性引用文件3 术语和定义4 基本要求4.1 设计研发4.2 设施设备4.3 检测能力5 选材要求5.1 原纸5.2 淀粉5.3 油墨5.4 柔性版5.5 模切板5.6 镀铜、镀锌低碳钢扁丝5.7 瓦楞纸箱成型用胶黏剂5.8 海绵衬垫6 工艺要求6.1 制作淀粉粘合剂6.2 瓦楞纸板生产流水线6.3 印刷6.4 模切6.5 钉糊成型7 仓储要求7.1 原材料仓储7.2 成品仓储
9.[标准] 包装用彩盒

发布单位：
中国-团体标准(CN-TUANTI)

标准状态：
现行

标准号：
T/WHAS 041-2022

发布时间：
2022-12-30

中标分类：
-

国标分类：
55.160 货物的包装和调运 - 箱、盒、板条箱

实施时间：
2023-01-15

摘要：主要技术内容:本文件规定了包装用彩盒（以下简称“彩盒”）的分类、要求、试验方法、检验规则、标志、包装、运输和贮存等。本文件适用于非直接接触食品饮料类、机械机电产品类、服饰鞋帽类等产品的包装用彩盒
10.[标准] 质量分级及“领跑者”评价要求成型纸质酒盒

发布单位：
中国-团体标准(CN-TUANTI)

标准状态：
现行

标准号：
T/CPF 0040-2022

发布时间：
2022-09-16

中标分类：
CCS

国标分类：
55.160 货物的包装和调运 - 箱、盒、板条箱

实施时间：
2022-09-16

摘要：范围:本文件适用于成型纸质酒盒质量和企业标准水平评价。相关机构开展质量分级和企业标准水平评估、“领跑者”评价以及相关认证时可参照使用，企业在制定企业标准时也可参照本文件。本文件不适用于折叠式纸质酒盒;主要技术内容:本文件规定了成型纸质酒盒质量及企业标准水平评价的评价指标体系和评价方法及等级划分
11.[标准] 胶印瓦楞纸箱生产技术规范

发布单位：
中国-团体标准(CN-TUANTI)

标准状态：
现行

标准号：
T/ZS 0444-2022

发布时间：
2022-12-25

中标分类：
Y 轻工、文化与生活用品

国标分类：
55.160 货物的包装和调运 - 箱、盒、板条箱

实施时间：
2022-12-31

摘要：主要技术内容:前言1 范围2 规范性引用文件3 术语和定义4 基本要求4.1 设计研发4.2 设施设备4.3 检测能力5 选材要求5.1 原纸5.2 淀粉5.3 油墨5.4 镀铜、镀锌低碳钢扁丝5.5 裱纸胶5.6 瓦楞纸箱成型用胶黏剂5.7 表面处理材料5.8 橡皮布5.9 PS版5.10 模切版6 工艺要求6.1 制作淀粉粘合剂6.2 瓦楞纸板生产流水线6.3 平张纸裁切6.4 印刷6.5 印后表面处理6.6 裱贴6.7 模切6.8 钉糊成型7 仓储要求7.1 原材料仓储7.2 成品仓储参考文献
12.[标准] Standard Practice for Fabrication of Fiberboard Shipping Boxes

纤维板装运箱制造标准规程

发布单位：
美国-美国材料与试验协会(US-ASTM)

标准状态：
现行

标准号：
ASTM D5118/D5118M-22

发布时间：
2022-11-01

中标分类：
-

国标分类：
55.160 货物的包装和调运 - 箱、盒、板条箱

实施时间：

摘要： 1.1This practice covers the fabrication of new fiberboard boxes, liners, and sleeves.1.2This practice points out the factors and components that must be controlled in the manufacture of corrugated and solid fiberboard boxes, liners, and sleeves.1.3This practice does not directly cover the adequacy of fiberboard containers under all conditions of exposure to atmosphere, handling, shipping, and storage. However, references regarding how to assess the adequacy of container under these conditions are included in the practice.1.4The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ======4.1Corrugated and solid fiberboard boxes, sleeves, and liners are used to unitize products into packages of size and shape suitable for manual or mechanical handling and to protect the contents against environmental, handling, shipping, and storage conditions.4.2This practice covers some of the basic constructions and styles of commercially available fiberboard packaging used to unitize and protect contents. This practice also provides references to aid in box design for performance and for testing boxes to gauge actual performance.4.3Use of Other Specifications—Nothing in this practice shall be construed to prohibit the use of boxes of special design or of fiberboard packages identified by package number in the current Uniform Freight Classification and National Motor Freight Classification when in the experience and judgment of the purchaser, the nature of the articles or material to be shipped justifies such boxes or packages. Some commodities may require less protection while other commodities may require better boxes than are specified herein. Containers for explosives and dangerous articles must also comply with regulations for the Transport of Hazardous Materials (CFR Title 49).FIG. 1Fiberboard Box DimensioningFIG. 2Box, Fiberboard; Detail of Manufacturer's Joint Construction for Class Weather Resistant and WWVR BoxesFIG. 3Box, Fiberboard; Details of Manufacturer's Joint TypesFIG. 4Cover AssemblyFIG. 5Box, Fiberboard; SL—SleeveFIG. 6Box, Fiberboard; L—LinerFIG. 7Box, Fiberboard; RSC—Regular Slotted Box (0201)FIG. 8Box, Fiberboard; OSC—Overlap Slotted Box (0202)FIG. 9Box, Fiberboard; FOL—Full Overlap Slotted Box (0203)FIG. 10Box, Fiberboard; SFF—Special Full Flap Slotted Box (0206)FIG. 11Box, Fiberboard; CSSC—Center Special Slotted Box (0204) and CSOSC—Center Special Overlap Slotted Box (0205)FIG. 12Box, Fiberboard; HSCC—Half Slotted Box with Cover (0200)FIG. 13Box, Fiberboard; DBLCC—Double Cover (0310)FIG. 14Box, Fiberboard; IC—Interlocking Double Cover (0325)FIG. 15Box, Fiberboard; FTC—Full Telescope (0301)FIG. 16Box, Fiberboard; FTHS—Two Piece Full Telescope Half Slotted Box (0320)FIG. 17Folder, Fiberboard; OPF—One Piece Folder (0401)FIG. 18Folder, Fiberboard; FPF—Five Panel Folder (0410)FIG. 19Box, Fiberboard; Rigid Box–Bliss Box (0606)FIG. 20Folder, Fiberboard; TSC—Tongue and Slot Closure
13.[标准] Standard Test Method for Short Term Creep Performance of Corrugated Fiberboard Containers Under Constant Load Using a Compression Test Machine

使用压缩试验机在恒定载荷下瓦楞纤维板容器短期蠕变性能的标准试验方法

发布单位：
美国-美国材料与试验协会(US-ASTM)

标准状态：
现行

标准号：
ASTM D7030-04(2022)

发布时间：
2022-05-01

中标分类：
-

国标分类：
55.160 货物的包装和调运 - 箱、盒、板条箱

实施时间：

摘要： 1.1This test method covers determining the resistance of an empty paper corrugated shipping container to a vertically applied constant compression load for a specified time. The test method may also include palletized or unitized loads made of such containers. The boxes are tested in the orientation that they are most likely to be stacked in a unitized or palletized load.1.2The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ======4.1In the distribution system, the packaged product may be stored for a period of time in a manner such that one or more containers are stacked on one another. The bottom package is thus continually subjected to a constant compression load.4.2This test method subjects an empty container to a predetermined static load and to specified atmospheric conditions, if required, over a short period of time using fixed platen compression testing equipment. Deflection is measured over time.4.3Deflection versus time data can be used to predict time to failure of corrugated shipping containers under constant load.
14.[标准] 포장용 나무틀상자의 설계

木质框架包装箱的建造

发布单位：
韩国-韩国标准(KR-KS)

标准状态：
现行

标准号：
KS T 1201-2022

发布时间：
2022-09-14

中标分类：
-

国标分类：
55.160 货物的包装和调运 - 箱、盒、板条箱

实施时间：

摘要： 이 표준은 내용물 질량 0.5 t 이상, 60 t 이하로 바깥치수가 길이 15.0 m 이하, 폭 5.0 m 이하 및 높이 5.0 m 이하의 수송 포장에 사용하는 틀상자(이하, 틀상자라고 한다.)에 대하여 규정한다.
15.[标准] 포장용 바깥틀 나무상자의 설계

出口包装用板条木箱的建造

发布单位：
韩国-韩国标准(KR-KS)

标准状态：
现行

标准号：
KS T 1203-2022

发布时间：
2022-09-14

中标分类：
-

国标分类：
55.160 货物的包装和调运 - 箱、盒、板条箱

实施时间：

摘要： 이 표준은 내용품 질량 0.5 t 이상, 15 t 이하로 바깥치수가 길이 800 cm, 폭 330 cm, 높이 330 cm 이하의 수송포장에 사용하는 바깥틀상자(이하 바깥틀상자라고 한다.)에 대하여 규정한다. 내용물이 길이 방향으로 한 몸체로서 강성이 있는 것이나 내용물 또는 내부 포장물의 강도가 바깥틀상자의 강도를 보완해줄 수 있는 수출품의 포장용으로 채용한다.
16.[标准] 钢制乏燃料运输容器制造通用技术要求

发布单位：
中国-行业标准-环保(CN-HJ)

标准状态：
现行

标准号：
HJ 1202-2021

发布时间：
2021-11-13

中标分类：
z

国标分类：
55.160 货物的包装和调运 - 箱、盒、板条箱

实施时间：
2021-12-01

摘要：本标准规定了钢制乏燃料运输容器（以下简称“容器”）材料、成形与组装、焊接与无损检验、试验，以及容器出厂等制造要求。本标准适用于钢制乏燃料运输容器的制造
17.[标准] 汽车成套零部件出口包装质量检测规范

发布单位：
中国-行业标准-物资管理(CN-WB)

标准状态：
现行

标准号：
WB/T 1110-2021

发布时间：
2021-05-31

中标分类：
A82 包装材料与容器

国标分类：
55.160 箱、盒、板条箱

实施时间：
2021-07-01

摘要：本文件规定了汽车成套零部件出口包装质量检测基本内容、包装材料和包装件质量检测要求。
本文件适用于汽车成套零部件出口业务包装质量检测，不适用于危险品类成套零部件，其他非成套汽车零部件可参照此文件执行。

获取标准
18.[标准] 果蔬类周转箱尺寸系列及技术要求

发布单位：
中国-国家标准(CN-GB)

标准状态：
现行

标准号：
GB/T 39907-2021

发布时间：
2021-08-20

中标分类：
A82 综合 - 标志、包装、运输、贮存 - 包装材料与容器

国标分类：
55.160 货物的包装和调运 - 箱、盒、板条箱

实施时间：
2022-03-01

摘要：本文件规定了果蔬类产品用周转箱的尺寸系列、技术要求和试验方法。
本文件适用于塑料制成的果蔬类产品周转箱的设计与生产。

获取标准
19.[标准] 果蔬类周转箱循环共用管理规范

发布单位：
中国-国家标准(CN-GB)

标准状态：
现行

标准号：
GB/T 40065-2021

发布时间：
2021-08-20

中标分类：
A82 综合 - 标志、包装、运输、贮存 - 包装材料与容器

国标分类：
55.160 货物的包装和调运 - 箱、盒、板条箱

实施时间：
2022-03-01

摘要：本文件规定了果蔬类产品周转箱循环共用的总体要求、参与方的要求、作业管理要求、信息管理要求，以及评价与改进。
本文件适用于用塑料制成的果蔬类产品周转箱循环共用的管理。

获取标准
20.[标准] 蜂窝纸板箱

发布单位：
中国-国家标准计划(CN-PLAN)

标准状态：
正在起草

标准号：
20210938-T-469

发布时间：
2021-04-30

中标分类：
A83 综合 - 标志、包装、运输、贮存 - 包装方法

国标分类：
55.160 货物的包装和调运 - 箱、盒、板条箱

实施时间：