国际电工委员会_国内外标准网文献检索下载

1.[标准] Information technology - Coded representation of immersive media - Part 13: Video decoding interface for immersive media

信息技术.沉浸式媒体的编码表示.第13部分:沉浸式媒体视频解码接口

发布单位：
国际组织-国际电工委员会(IX-IEC)

标准状态：
现行

标准号：
ISO/IEC 23090-13:2024

发布时间：
2024-01-19

中标分类：
-

国标分类：
-

实施时间：

摘要： ISO/IEC 23090-13:2024 This document specifies the interfaces of a video decoding engine as well as the operations related to elementary streams and metadata that can be performed by this video decoding engine. To support those operations, this document also specifies SEI messages when necessary for certain video codecs.
2.[标准] Information technology - Criteria for concept systems

信息技术.概念系统标准

发布单位：
国际组织-国际电工委员会(IX-IEC)

标准状态：
现行

标准号：
ISO/IEC 5394:2024

发布时间：
2024-01-12

中标分类：
-

国标分类：
35.020 信息技术、办公机械 - 信息技术(IT)综合

实施时间：

摘要： This document provides the criteria for effective concept systems. It provides the requirements for components, formation, representations, structural levels and management of concept systems. Concept systems are used in the description of semantics of data in ISO/IEC 11179 standards.
3.[标准] Office equipment - Print quality measurement methods for colour prints - Part 1: Image quality measurement methods

办公设备.彩色印刷品的印刷质量测量方法.第1部分:图像质量测量方法

发布单位：
国际组织-国际电工委员会(IX-IEC)

标准状态：
现行

标准号：
ISO/IEC 22592-1:2024

发布时间：
2024-01-26

中标分类：
-

国标分类：
37.100.10 印制技术 - 印刷、复制设备

实施时间：

摘要： ISO/IEC 22592-1:2024 This document specifies test methods as well as test charts to measure the image quality attributes and those variations in colour prints typically used in office environment. Included are digital colour prints formed by using a multifunction or single function printer. Printers supporting a maximum paper size of A4 or larger are suitable for the measurements using the test charts defined in this document.The image quality attributes included are colour reproduction, line quality, graininess and mottle.The sources of variation considered are locations in a page (within-page variation), printed side in a sheet (side-to-side variation), printed order of the sheet (sheet-to-sheet variation) and colours printed on the back side of evaluated patch (show-through variation).A duplex print set, comprising several sheets which are printed by multifunction or single function printer with colour images on both surfaces of a substrate, is a main application of the test methods to measure image quality variations in the set. Variations, such as within-page variation and sheet-to-sheet variation, are also applicable for a simplex print set comprising several sheets which are printed colour images on one surface of a substrate and no image on the other surface.Both duplex and simplex printers are applicable to form a print set. When image qualities of duplex prints are measured, duplex printers which are capable to print images on both sides of substrate automatically are applicable to form duplex prints. However, simplex printers which require a manual arrangement of substrates between the front side and back side printing to form duplex prints are out of scope of this document.
4.[标准] Amendment 1 - Information technology – General video coding - Part 2: Low complexity enhancement video coding - Additional levels

修改件1.信息技术.通用视频编码.第2部分:低复杂度增强视频编码.附加等级

发布单位：
国际组织-国际电工委员会(IX-IEC)

标准状态：
现行

标准号：
ISO/IEC 23094-2:2021/AMD1:2024

发布时间：
2024-01-22

中标分类：
-

国标分类：
-

实施时间：
5.[标准] Household and similar electrical air cleaning appliances - Methods for measuring the performance - Part 2-1: Particular requirements for determination of reduction of particles

家用和类似用途空气净化电器.性能测量方法.第2-1部分:颗粒减少量测定的特殊要求

发布单位：
国际组织-国际电工委员会(IX-IEC)

标准状态：
现行

标准号：
IEC 63086-2-1:2024

发布时间：
2024-01-19

中标分类：
-

国标分类：
23.120 流体系统和通用件 - 通风机、风扇、空调器

实施时间：

摘要： IEC 63086-2-1:2024 specifies test methods for measuring the performance of electrically powered household and similar air cleaners intended for the reduction of particulate pollutants.
6.[标准] Identification cards - Card service life - Part 2: Methods of evaluation

识别卡.卡的使用寿命.第2部分:评定方法

发布单位：
国际组织-国际电工委员会(IX-IEC)

标准状态：
现行

标准号：
ISO/IEC 24789-2:2024

发布时间：
2024-01-08

中标分类：
-

国标分类：
35.240.15 信息技术应用 - 识别卡和有关装置

实施时间：

摘要： ISO/IEC 24789-2:2024 This document provides methods of evaluation for ID-1 identification card service life for the applications provided in ISO/IEC 24789-1.The listed evaluation methods represent available tests, not mandatory tests. The selection of mandatory tests is listed in ISO/IEC 24789-1.
7.[标准] Amendment 1 - Personal identification - ISO-compliant driving licence - Part 4: Test methods

修改件1.个人识别.ISO合格驾驶执照.第4部分:试验方法

发布单位：
国际组织-国际电工委员会(IX-IEC)

标准状态：
现行

标准号：
ISO/IEC 18013-4:2019/AMD1:2024

发布时间：
2024-01-12

中标分类：
-

国标分类：
35.240.15 信息技术应用 - 识别卡和有关装置

实施时间：
8.[标准] Electrical insulating materials and systems - Electrical measurement of partial discharges (PD) under short rise time and repetitive voltage impulses

电绝缘材料和系统.短上升时间和重复电压脉冲下局部放电（PD）的电气测量

发布单位：
国际组织-国际电工委员会(IX-IEC)

标准状态：
现行

标准号：
IEC TS 61934:2024 RLV

发布时间：
2024-01-26

中标分类：
-

国标分类：
29.080.30 绝缘 - 绝缘系统

29.035.01 绝缘材料 - 绝缘材料综合

17.220.99 电学、磁学、电和磁的测量 - 有关电学和磁学的其他标准

实施时间：

摘要： IEC TS 61934:2024 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition.IEC TS 61934:2024 is applicable to the off-line electrical measurement of partial discharges (PDs) that occur in electrical insulation systems (EISs) when stressed by repetitive voltage impulses generated from power electronics devices.Typical applications are EISs belonging to apparatus driven by power electronics, such as motors, inductive reactors, wind turbine generators and the power electronics modules themselves.NOTE Use of this document with specific products can require the application of additional procedures.Excluded from the scope of this document are:- methods based on optical or ultrasonic PD detection,- fields of application for PD measurements when stressed by non-repetitive impulse voltages such as lightning impulse or switching impulses from switchgear.This edition includes the following significant technical changes with respect to the previous edition:a) background information on the progress being made in the field of power electronics including the introduction of wide band gap semiconductor devices has been added to the Introduction;b) voltage impulse generators; the parameter values of the voltage impulse waveform have been modified to reflect application of wide band gap semiconductor devices.c) PD detection methods; charge-based measurements are not described in this third edition nor are source-controlled gating techniques to suppress external noise.d) Since the previous edition in 2011, there have been significant technical advances in this field as evidenced by several hundreds of publications. Consequently, the Bibliography in the 2011 edition has been deleted in this third edition.
9.[标准] Microgrids - Part 3-2: Technical requirements - Energy management systems

微电网.第3-2部分:技术要求.能源管理系统

发布单位：
国际组织-国际电工委员会(IX-IEC)

标准状态：
现行

标准号：
IEC TS 62898-3-2:2024

发布时间：
2024-01-09

中标分类：
-

国标分类：
29.240.01 输电网和配电网 - 输电网和配电网综合

实施时间：

摘要： IEC TS 62898-3-2:2024 provides technical requirements for the operation of energy management systems of microgrids. This document applies to utility-interconnected or islanded microgrids. This document describes specific recommendations for low-voltage (LV) and medium-voltage (MV) systems.This document focuses on developing standards of energy management systems aimed for microgrids integrated in decentralized energy systems or public distribution grids. It concerns some particularities that are not totally covered by the existing conventional energy system. The microgrid energy management systems are being studied by various actors (utilities, manufacturers, and energy providers) on actual demonstration projects and application use case. The aims of this document are to make the state of the art of existing energy management systems used in actual microgrids projects, to classify the relevant functions which can be accomplished by microgrid energy management systems, and to recommend necessary technical requirements for energy management systems of future microgrids.This document includes the following items:？ main performances of key components of microgrid: decentralized energy resources, energy storages and controllable loads),？ description of main functions and topological blocks of microgrid energy management systems (MEMS),？ specification of information exchange protocol between main function blocks, linked to microgrid monitoring and control systems (MMCS).Main functions of MEMS:？ power and energy management among different resources within microgrid including active and reactive power flows with different time scales,？ power and energy forecasts of microgrid,？ energy balancing between upstream grid and microgrid energy resources according to power and energy forecast and upstream and local constraints,？ economic and environmental optimization,？ possible service capacities such as capacity market auctions and resiliency anticipation: new business models,？ data archiving, trending, reporting and evaluation of operation capacities in various operation modes.MEMS can have some other additional functions according to microgrid size and actual application cases:？ tariff and market trading management,？ utility ancillary services such as frequency regulation, voltage regulation, power quality and reliability improvement, demand response possibilities, change of operation modes linked to MMCS.
10.[标准] Information technology - Multimedia content description interface - Part 17: Compression of neural networks for multimedia content description and analysis

信息技术.多媒体内容描述接口.第17部分:多媒体内容描述和分析用神经网络的压缩

发布单位：
国际组织-国际电工委员会(IX-IEC)

标准状态：
现行

标准号：
ISO/IEC 15938-17:2024

发布时间：
2024-01-10

中标分类：
-

国标分类：
-

实施时间：

摘要： ISO/IEC 15938-17:2024 This document specifies Neural Network Coding (NNC) as a compressed representation of the parameters/weights of a trained neural network and a decoding process for the compressed representation, complementing the description of the network topology in existing (exchange) formats for neural networks. It establishes a toolbox of compression methods, specifying (where applicable) the resulting elements of the compressed bitstream. Most of these tools can be applied to the compression of entire neural networks, and some of them can also be applied to the compression of differential updates of neural networks with respect to a base network. Such differential updates are for example useful when models are redistributed after fine-tuning or transfer learning, or when providing versions of a neural network with different compression ratios.This document does not specify a complete protocol for the transmission of neural networks, but focuses on compression of network parameters. Only the syntax format, semantics, associated decoding process requirements, parameter sparsification, parameter transformation methods, parameter quantization, entropy coding method and integration/signalling within existing exchange formats are specified, while other matters such as pre-processing, system signalling and multiplexing, data loss recovery and post-processing are considered to be outside the scope of this document. Additionally, the internal processing steps performed within a decoder are also considered to be outside the scope of this document; only the externally observable output behaviour is required to conform to the specifications of this document.
11.[标准] Artificial intelligence - Functional safety and AI systems

人工智能-功能安全和人工智能系统

发布单位：
国际组织-国际电工委员会(IX-IEC)

标准状态：
现行

标准号：
ISO/IEC TR 5469:2024

发布时间：
2024-01-08

中标分类：
-

国标分类：
35.020 信息技术、办公机械 - 信息技术(IT)综合

实施时间：

摘要： ISO/IEC TR 5469:2024 This document describes the properties, related risk factors, available methods and processes relating to:- use of AI inside a safety related function to realize the functionality;- use of non-AI safety related functions to ensure safety for an AI controlled equipment;- use of AI systems to design and develop safety related functions.
12.[标准] Wearable electronic devices and technologies - Part 402-3: Performance measurement of fitness wearables - Test methods for the determination of the accuracy of heart rate

可穿戴电子设备和技术.第402-3部分:健身可穿戴设备的性能测量.心率准确性测定的试验方法

发布单位：
国际组织-国际电工委员会(IX-IEC)

标准状态：
现行

标准号：
IEC 63203-402-3:2024

发布时间：
2024-01-09

中标分类：
-

国标分类：
31.020 电子学 - 电子元器件综合

实施时间：

摘要： IEC 63203-402-3:2024 specifies terms, a measurement protocol, and a test to evaluate the accuracy of wearables that measure heart rate with a photoplethysmography (PPG) sensor. While this document can be used to measure a variety of different devices claiming to report heart rate, care will be taken when testing in countries that differentiate between heart rate and pulse rate. This measurement protocol is not intended to evaluate medical devices associated with the IEC 60601 series or ISO 80601 series.
13.[标准] Information technology - Home electronic system (HES) architecture - Part 5-104: Intelligent grouping and resource sharing for HES Class 2 and Class 3 - RA server-based smart lock application

信息技术.家庭电子系统（HES）体系结构.第5-104部分:HES第2类和第3类的智能分组和资源共享.RA基于服务器的智能锁应用

发布单位：
国际组织-国际电工委员会(IX-IEC)

标准状态：
现行

标准号：
ISO/IEC 14543-5-104:2024

发布时间：
2024-01-17

中标分类：
-

国标分类：
-

实施时间：

摘要： ISO/IEC 14543-5-194:2024(E) specifies the remote access (RA) server-based application framework, device interaction model, flow process and interfaces, and message formats to achieve intelligent grouping, resource sharing and service collaboration among IGRS smart lock devices.This document is applicable to smart lock devices with direct network connections or connections through an intermediary network to a server for security authentication. This server utilizes a method to minimize the possibility of unauthorized access to these smart locks, while maintaining seamless interoperability among users, smart lock devices and RA servers at home, office or other remote environments.
14.[标准] Information technology - IT asset management - Part 6: Hardware identification tag

信息技术.IT资产管理.第6部分:硬件识别标签

发布单位：
国际组织-国际电工委员会(IX-IEC)

标准状态：
现行

标准号：
ISO/IEC 19770-6:2024

发布时间：
2024-01-26

中标分类：
-

国标分类：
03.120.20 质量 - 产品认证和机构认证、合格评定

35.080 信息技术、办公机械 - 软件开发和系统文件

实施时间：

摘要： This document provides specifications for a transport format which enables the digital encapsulation of this data. This document refers to an encapsulation of hardware identification (HWID) data as a HWID tag, just as ISO/IEC 19770-2 refers to software identification (SWID) tags for software identification.This document applies to the following.- Tag producers: organizations that create HWID tags for use by others in the market. A tag producer can be part of the organization creating the hardware or a third-party organization. These organizations can be broken down into two major categories.- Device or component providers: entities responsible for the manufacturing or creation of the hardware device and/or associated operating system, virtual environment, or application platform. Platform providers which support this document can additionally provide tag management capabilities at the level of the platform or operating system.- Tag tool providers: entities that provide tools to create hardware identification tags. For example, tools within development environments that generate hardware identification tags, or installation tools that can create tags on behalf of the installation process, and/or desktop management tools that can create tags for underlying hardware, virtual machines, or platforms that did not originally have a hardware identification tag.- Tag consumers: tools and/or organizations who utilize information from HWID tags are broken down into the following two major categories.- Device or component consumers: entities that purchase, install, integrate, and/or otherwise deploy physical or virtual hardware or components.- IT discovery and processing tool providers: entities that provide tools to collect, store, and process hardware identification tags. These tools may be targeted at a variety of different market segments, including security, asset management, and logistics.This document deals only with hardware device or component identification.This document does not detail information technology asset management (ITAM) processes required for discovery and management of hardware (which is provided in ISO/IEC 19770-1) software identification tags (as defined by ISO/IEC 19770-2), entitlement tags (as defined by ISO/IEC 19770-3), or resource utilization measurements (as defined by ISO/IEC 19770-4).
15.[标准] Information technology - Coded representation of immersive media - Part 18: Carriage of geometry-based point cloud compression data

信息技术.沉浸式媒体的编码表示.第18部分:基于几何的点云压缩数据的传输

发布单位：
国际组织-国际电工委员会(IX-IEC)

标准状态：
现行

标准号：
ISO/IEC 23090-18:2024

发布时间：
2024-01-12

中标分类：
-

国标分类：
-

实施时间：

摘要： This document specifies a media format that enables the storage and delivery of geometry-based point cloud compression data. The geometry-based point cloud compression data can be timed or non-timed. It supports flexible extraction of geometry-based point cloud compression data at delivery or decoding time.
16.[标准] Optical fibre cables - Part 2-24: Indoor cables - Detail specification for multiple multi-fibre unit cables for use in MPO connector terminated breakout cable assemblies

光纤电缆.第2-24部分:室内电缆.MPO连接器端接分接电缆组件用多根多纤维单元电缆的详细规范

发布单位：
国际组织-国际电工委员会(IX-IEC)

标准状态：
现行

标准号：
IEC 60794-2-24:2024

发布时间：
2024-01-26

中标分类：
-

国标分类：
33.180.10 光纤通信 - 光纤和光缆

实施时间：

摘要： IEC 60794-2-24:2024 is a detail specification and specifies indoor multiple multi-fibre unit cables for use in MPO (multi-fibre push on) connector terminated breakout cable assemblies.
17.[标准] Information technology - Affective computing user interface (AUI) - Part 2: Affective characteristics

信息技术.情感计算用户界面（AUI）.第2部分:情感特性

发布单位：
国际组织-国际电工委员会(IX-IEC)

标准状态：
现行

标准号：
ISO/IEC TR 30150-2:2024

发布时间：
2024-02-15

中标分类：
-

国标分类：
35.240.20 信息技术应用 - 信息技术在办公中的应用

实施时间：

摘要： ISO/IEC TR 30150-2:2024 This document identifies the affective characteristics for affective computing user interface (AUI), including universal, cultural, individual and situational issues relating to the affective needs of users. This document also describes the selection criteria of these affective characteristics, and the methods to identify or apply them.This document focuses on developers of affective computing user interfaces who want to meet the needs of users.This document does not specify the implementation of affective computing.
18.[标准] Eyewear display - Part 22-20: Specific measurement methods for AR type - Image quality

眼镜显示器.第22-20部分:AR型的特殊测量方法.图像质量

发布单位：
国际组织-国际电工委员会(IX-IEC)

标准状态：
现行

标准号：
IEC 63145-22-20:2024

发布时间：
2024-02-06

中标分类：
-

国标分类：
31.120 电子学 - 电子显示器件

17.180.99 光学和光学测量 - 有关光学和光学测量的其他标准

实施时间：

摘要： IEC 63145-22-20:2024 specifies the standard measuring conditions and measurement methods for determining the image quality of augmented reality (AR) type eyewear displays. This document applies to see-through type (AR glasses) eyewear displays using virtual image optics.See-through type displays (VR glasses), contact lens-type displays, and retina direct projection displays are out of the scope of this document.
19.[标准] Office equipment - Security requirements for hard copy devices (HCDs) - Part 1: Definition of the basic requirements

办公设备.硬拷贝设备（HCD）的安全要求.第1部分:基本要求的定义

发布单位：
国际组织-国际电工委员会(IX-IEC)

标准状态：
现行

标准号：
ISO/IEC 7184:2024

发布时间：
2024-02-02

中标分类：
-

国标分类：
37.100.10 印制技术 - 印刷、复制设备

33.050.30 电信终端设备 - 用户电报、可视图文、用户传真设备

实施时间：

摘要： ISO/IEC 7184:2024 This document defines basic security requirements for the protection of hard copy devices (HCDs) including identification and authentication, security management, software update, field-replaceable nonvolatile storage data protection, network data protection and public switched telephone network (PSTN) fax-network separation.It can be applied to office equipment with network functions including printers, scanners, fax machines, digital copiers, and digital multi-function machines, specifically for small office and home office users.This document assumes a small, private information processing environment in which most elements of security are provided by the physical environment. In such an environment is assumed to be physically and logically protected from threats originating from outside of that environment, typically by limiting physical access to the HCD and connecting it to a LAN that is protected from the public Internet. A small office or home office would be a typical example of this environment.Please note that the requirements outlined in this document are not intended to replace the existing Common Criteria Certification for hardcopy devices which ensure the minimum-security requirements for enterprise environment. For example, aspects being required in Common Criteria Certification such as audit data generation, self-test capabilities, and protection of key material are not adequately addressed.
20.[标准] Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps

家用和类似用途电器.安全.第2-41部分:泵的特殊要求

发布单位：
国际组织-国际电工委员会(IX-IEC)

标准状态：
现行

标准号：
IEC 60335-2-41:2024

发布时间：
2024-01-30

中标分类：
-

国标分类：
97.180 家用和商用设备、文娱、体育 - 其他家用和商用设备

23.080 流体系统和通用件 - 泵

13.120 环保、保健和安全 - 家用品安全

实施时间：

摘要： IEC 60335-2-41:2024 deals with the safety of electric pumps for liquids having a temperature not exceeding 90 °C, intended for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances including direct current (DC) supplied appliances and battery-operated appliances. Examples of appliances within the scope of this standard are- aquarium pumps;- garden pond pumps;- shower-boost pumps;- sludge pumps;- submersible pumps;- table fountain pumps;- vertical wet pit pumps.Appliances not intended for normal household use, but that nevertheless can be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard.As far as is practicable, this standard deals with the common hazards presented by ap-pliances that are encountered by all persons in and around the home. However, in gen-eral, it does not take into account- persons (including children) whose physical, sensory or mental capabilities; or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction;- children playing with the appliance.Attention is drawn to the fact that- for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements can be necessary;- in many countries additional requirements are specified by the national health authori-ties, the national authorities responsible for the protection of labour and similar au-thorities.This standard does not apply to- stationary circulation pumps for heating and service water installations (IEC 60335-2-51);- pumps for flammable liquids;- pumps intended exclusively for industrial purposes;- pumps intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas);- pumps incorporating chlorinators of the electrolytic type.Pumps incorporated in appliances are not covered by this standard unless a specific ref-erence is made.This fifth edition cancels and replaces the fourth edition published in 2012. This edition constitutes a technical revision.This edition includes the following significant technical changes with respect to the previous edition:a) alignment with IEC 60335-1:2020;b) modification or conversion of some notes to normative text (Clause 1, 7.12.1, 25.7);c) introduction of IEC 60417 symbol for maximum operating depth and indoor use only (7.1, 7.6, 7.12.1);d) clarification of requirements for aquarium pumps and garden pond pumps;e) addition of legibility requirements for markings exposed to solar radiation (7.14);f) clarification of pumps subjected to test probe 18 (8.1.1, 20.2);g) introduction of accessible surface temperature limits (Clause 11);h) addition of requirements for IEC 61984 connectors for pumps intended for permanent connection to fixed wiring (22.107, 24.1.5, 24.1.101, 25.3).i) clarifications on remote operation for pumps in scope of this standard (22.40, 22.49, 22,51).This part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its amendments unless that edition precludes it; in that case, the latest edition that does not preclude it is used. It was established on the basis of the sixth edition (2020) of that standard.