ASM国际_国内外标准网文献检索下载

1.[标准] OVAKO CROMAX 280X - Steel Alloy

OVAKO CROMAX 280X-钢合金

发布单位：
国际组织-ASM国际(IX-ASM)

标准状态：
现行

标准号：
ASM SA-740

发布时间：
2016-01-01

中标分类：
-

国标分类：
-

实施时间：

摘要： View Sample Alloy Digest Data Sheet (PDF)Since 1952, Alloy Digest has been the leading reference for materials property data on metals and alloys used throughout the world. Featuring graphs, charts and tables, these sheets give facts and figures on composition or characterization, physical and mechanical properties, heat treatment, and machinability.Cromax is a long, hard-chrome plated product in the form of bars and tubes. These products are available in different steel gradeswith executions in a broad range of sizes.
2.[标准] ABREX 400LT - Abrasion-Resistant Plate

ABREX 400LT-耐磨板

发布单位：
国际组织-ASM国际(IX-ASM)

标准状态：
现行

标准号：
ASM SA-757

发布时间：
2016-06-01

中标分类：
-

国标分类：
-

实施时间：

摘要： View Sample Alloy Digest Data Sheet (PDF)Since 1952, Alloy Digest has been the leading reference for materials property data on metals and alloys used throughout the world. Featuring graphs, charts and tables, these sheets give facts and figures on composition or characterization, physical and mechanical properties, heat treatment, and machinability.The Abrex Series features four standard options of abrasion-resistant steel plate in addition to three extra tough options. All of the products are maintained at very low impurity levels, making them well suited to welding and formability. The number in each grade's title represents the hardness of steel in HBW. LT refers to extra tough.
3.[标准] VALLOUREC VM 95 13Cr SS - Oil Country Tubular Goods (OCTG) Line Pipe

VALLOUREC VM 95 13Cr不锈钢-石油国家管材（OCTG）管线管

发布单位：
国际组织-ASM国际(IX-ASM)

标准状态：
现行

标准号：
ASM CS-200

发布时间：
2016-07-01

中标分类：
-

国标分类：
-

实施时间：

摘要： View Sample Alloy Digest Data Sheet (PDF)Since 1952, Alloy Digest has been the leading reference for materials property data on metals and alloys used throughout the world. Featuring graphs, charts and tables, these sheets give facts and figures on composition or characterization, physical and mechanical properties, heat treatment, and machinability.Vallourec VM 95 13Cr SS is a proprietary low alloy carbon steel for use in OCTG as a material suitable for sour service.
4.[标准] BOHLER M268 VMR - Plastic Mold Steel

BOHLER M268 VMR-塑料模具钢

发布单位：
国际组织-ASM国际(IX-ASM)

标准状态：
现行

标准号：
ASM TS-733

发布时间：
2016-01-01

中标分类：
-

国标分类：
-

实施时间：

摘要： View Sample Alloy Digest Data Sheet (PDF)Since 1952, Alloy Digest has been the leading reference for materials property data on metals and alloys used throughout the world. Featuring graphs, charts and tables, these sheets give facts and figures on composition or characterization, physical and mechanical properties, heat treatment, and machinability.Böhler M268 VMR is a hardened and tempered plastic mold steel with excellent cleanliness for best polishing.
5.[标准] MTEK 25-35MA - High-Temperature Austenitic Casting Alloy

MTEK 25-35MA-高温奥氏体铸造合金

发布单位：
国际组织-ASM国际(IX-ASM)

标准状态：
现行

标准号：
ASM SS-1249

发布时间：
2016-09-01

中标分类：
-

国标分类：
-

实施时间：

摘要： View Sample Alloy Digest Data Sheet (PDF)Since 1952, Alloy Digest has been the leading reference for materials property data on metals and alloys used throughout the world. Featuring graphs, charts and tables, these sheets give facts and figures on composition or characterization, physical and mechanical properties, heat treatment, and machinability.MTEK 25-35MA is a solid solution microalloyed Fe-Ni-Cr-Nb casting alloy with good high-temperature creep strength. It is intended for use in pyrolysis cracker furnaces.
6.[标准] OVAKO CROMAX 42CrMo4 - Steel Alloy

OVAKO CROMAX 42CrMo4-钢合金

发布单位：
国际组织-ASM国际(IX-ASM)

标准状态：
现行

标准号：
ASM SA-748

发布时间：
2016-04-01

中标分类：
-

国标分类：
-

实施时间：

摘要： View Sample Alloy Digest Data Sheet (PDF)Since 1952, Alloy Digest has been the leading reference for materials property data on metals and alloys used throughout the world. Featuring graphs, charts and tables, these sheets give facts and figures on composition or characterization, physical and mechanical properties, heat treatment, and machinability.Cromax is a long hard chrome-plated product in the form of bars and tubes. These products are available in different steel grades with executions in a broad range of sizes. Ovako 42CrMo4 is a quench and tempered steel with high strength and good toughness. (See Alloy Digest SA-573 from September 2007.)
7.[标准] ANCORLAM - Soft Magnetic Alloy

ANCORLAM-软磁合金

发布单位：
国际组织-ASM国际(IX-ASM)

标准状态：
现行

标准号：
ASM CS-194

发布时间：
2016-01-01

中标分类：
-

国标分类：
-

实施时间：

摘要： View Sample Alloy Digest Data Sheet (PDF)Since 1952, Alloy Digest has been the leading reference for materials property data on metals and alloys used throughout the world. Featuring graphs, charts and tables, these sheets give facts and figures on composition or characterization, physical and mechanical properties, heat treatment, and machinability.AncorLam is a high performance insulated particle material suitable for a variety of soft magnetic applications that require low core losses.
8.[标准] BOHLER K490 MICROCLEAN - Cold Work Tool Steel

BOHLER K490微清洁-冷作业工具钢

发布单位：
国际组织-ASM国际(IX-ASM)

标准状态：
现行

标准号：
ASM TS-734

发布时间：
2016-02-01

中标分类：
-

国标分类：
-

实施时间：

摘要： View Sample Alloy Digest Data Sheet (PDF)Since 1952, Alloy Digest has been the leading reference for materials property data on metals and alloys used throughout the world. Featuring graphs, charts and tables, these sheets give facts and figures on composition or characterization, physical and mechanical properties, heat treatment, and machinability.Böhler K490 Microclean is an improved and more efficient cold work tool steel compared with other commonly used PM steels such as M4 or PM23. Toughness is more than doubled with a similar wear resistance.
9.[标准] S-TEN2 - Corrosion Resistant Steel Alloy

S-TEN2-耐腐蚀钢合金

发布单位：
国际组织-ASM国际(IX-ASM)

标准状态：
现行

标准号：
ASM SA-754

发布时间：
2016-06-01

中标分类：
-

国标分类：
-

实施时间：

摘要： View Sample Alloy Digest Data Sheet (PDF)Since 1952, Alloy Digest has been the leading reference for materials property data on metals and alloys used throughout the world. Featuring graphs, charts and tables, these sheets give facts and figures on composition or characterization, physical and mechanical properties, heat treatment, and machinability.S-TEN2 is a steel alloy containing copper to make it more corrosion resistant to dew point corrosion than conventional carbon steels. It is used as tubing in economizers.
10.[标准] NSSMC-NAR-SN-1, SN-3, SN-5 - Austenitic Stainless Steel

NSSMC-NAR-SN-1、SN-3、SN-5-奥氏体不锈钢

发布单位：
国际组织-ASM国际(IX-ASM)

标准状态：
现行

标准号：
ASM SS-1237

发布时间：
2016-01-01

中标分类：
-

国标分类：
-

实施时间：

摘要： View Sample Alloy Digest Data Sheet (PDF)Since 1952, Alloy Digest has been the leading reference for materials property data on metals and alloys used throughout the world. Featuring graphs, charts and tables, these sheets give facts and figures on composition or characterization, physical and mechanical properties, heat treatment, and machinability.NSSMC-NAR-SN-1, SN-3, and SN-5 are austenitic stainless steels with corrosion resistance to nitric acid. The alloys can be abbreviated as NSSMC-NAR-SN-1: LC-17Cr-14Ni-4Si, NSSMC-NAR-SN-3: LC-11Cr-17Ni-6Si-Zr-Ti, and NSSMC-NAR-SN-5: LC-27Cr-8Ni-Si-N.
11.[标准] N-A-XTRA M620 - Quenched and Tempered Heavy Plate

N-A-XTRA M620-淬火和回火厚板

发布单位：
国际组织-ASM国际(IX-ASM)

标准状态：
现行

标准号：
ASM SA-746

发布时间：
2016-04-01

中标分类：
-

国标分类：
-

实施时间：

摘要： View Sample Alloy Digest Data Sheet (PDF)Since 1952, Alloy Digest has been the leading reference for materials property data on metals and alloys used throughout the world. Featuring graphs, charts and tables, these sheets give facts and figures on composition or characterization, physical and mechanical properties, heat treatment, and machinability.This datasheet applies to quenched and tempered heavy plates made of the special structural steel N-A-XTRA. This steel can be supplied in six different grades with a minimum yield strength of 550, 620, and 700 MPa (79.8, 89.9, and 101.5 ksi). Some grades are delivered with different toughness properties. This quality shown in this datasheet is for low service temperature with minimum impact energy at -40 °C (-40 °F) for grade N-A-XTRA M in a thickness range from 3 to 120 mm (0.118 to 4.724 in.).
12.[标准] VDC-RF - Hot Work Die Steel

VDC-RF-热加工模具钢

发布单位：
国际组织-ASM国际(IX-ASM)

标准状态：
现行

标准号：
ASM TS-735

发布时间：
2016-07-01

中标分类：
-

国标分类：
-

实施时间：

摘要： View Sample Alloy Digest Data Sheet (PDF)Since 1952, Alloy Digest has been the leading reference for materials property data on metals and alloys used throughout the world. Featuring graphs, charts and tables, these sheets give facts and figures on composition or characterization, physical and mechanical properties, heat treatment, and machinability.VDC-RF hot work die steel is an improved version of H13 by melting practice. See Alloy Digest TS-45.
13.[标准] N-A-XTRA 550 CLASSIC - Quenched and Tempered Heavy Plate

N-A-XTRA 550经典-淬火和回火厚板

发布单位：
国际组织-ASM国际(IX-ASM)

标准状态：
现行

标准号：
ASM SA-760

发布时间：
2016-07-01

中标分类：
-

国标分类：
-

实施时间：

摘要： View Sample Alloy Digest Data Sheet (PDF)Since 1952, Alloy Digest has been the leading reference for materials property data on metals and alloys used throughout the world. Featuring graphs, charts and tables, these sheets give facts and figures on composition or characterization, physical and mechanical properties, heat treatment, and machinability.This datasheet applies to quenched and tempered heavy plates made of the special structural steel N-A-XTRA. This steel can be supplied in six different grades with a minimum yield strength of 550, 620, and 700 MPa (79.8, 89.9, and 101.5 ksi). Some grades are delivered with different toughness properties. This special quality is for low service temperature with minimum impact energy at -60 °C (-76 °F) for Classic N-A-XTRA in a thickness range from 3-120 mm (0.118-4.724 in.).
14.[标准] BOHLER T550 - High-Temperature Alloy

BOHLER T550-高温合金

发布单位：
国际组织-ASM国际(IX-ASM)

标准状态：
现行

标准号：
ASM SA-753

发布时间：
2016-05-01

中标分类：
-

国标分类：
-

实施时间：

摘要： View Sample Alloy Digest Data Sheet (PDF)Since 1952, Alloy Digest has been the leading reference for materials property data on metals and alloys used throughout the world. Featuring graphs, charts and tables, these sheets give facts and figures on composition or characterization, physical and mechanical properties, heat treatment, and machinability.Böhler T550 is a creep resisting steel, hardened and tempered.
15.[标准] STRENX 600MC - Structural Steel

STRENX 600MC-结构钢

发布单位：
国际组织-ASM国际(IX-ASM)

标准状态：
现行

标准号：
ASM SA-756

发布时间：
2016-06-01

中标分类：
-

国标分类：
-

实施时间：

摘要： View Sample Alloy Digest Data Sheet (PDF)Since 1952, Alloy Digest has been the leading reference for materials property data on metals and alloys used throughout the world. Featuring graphs, charts and tables, these sheets give facts and figures on composition or characterization, physical and mechanical properties, heat treatment, and machinability.Strenx is a new extensive portfolio of high-strength, high performance, structural steels. The group has an extremely wide range of strength from 600-1300 MPa (87-189 ksi). The number in the name indicates the minimum yield strength.
16.[标准] BOHLER T504 - High-Temperature Alloy

BOHLER T504-高温合金

发布单位：
国际组织-ASM国际(IX-ASM)

标准状态：
现行

标准号：
ASM SA-751

发布时间：
2016-05-01

中标分类：
-

国标分类：
-

实施时间：

摘要： View Sample Alloy Digest Data Sheet (PDF)Since 1952, Alloy Digest has been the leading reference for materials property data on metals and alloys used throughout the world. Featuring graphs, charts and tables, these sheets give facts and figures on composition or characterization, physical and mechanical properties, heat treatment, and machinability.Böhler T504 is a creep resisting steel, hardened and tempered.
17.[标准] VALLOUREC VM 85 13Cr - Oil Country Tubular Goods (OCTG) Line Pipe

VALLOUREC VM 85 13Cr-石油国家管材（OCTG）管线管

发布单位：
国际组织-ASM国际(IX-ASM)

标准状态：
现行

标准号：
ASM CS-198

发布时间：
2016-04-01

中标分类：
-

国标分类：
-

实施时间：

摘要： View Sample Alloy Digest Data Sheet (PDF)Since 1952, Alloy Digest has been the leading reference for materials property data on metals and alloys used throughout the world. Featuring graphs, charts and tables, these sheets give facts and figures on composition or characterization, physical and mechanical properties, heat treatment, and machinability.Vallourec VM 85 13Cr is a proprietary low alloy carbon steel for use in OCTG as a material suitable for sour service.
18.[标准] OUTOKUMPU TYPE 630 - Hardenable Martensitic Stainless Steel

OUTOKUMPU 630型-可硬化马氏体不锈钢

发布单位：
国际组织-ASM国际(IX-ASM)

标准状态：
现行

标准号：
ASM SS-1238

发布时间：
2016-02-01

中标分类：
-

国标分类：
-

实施时间：

摘要： View Sample Alloy Digest Data Sheet (PDF)Since 1952, Alloy Digest has been the leading reference for materials property data on metals and alloys used throughout the world. Featuring graphs, charts and tables, these sheets give facts and figures on composition or characterization, physical and mechanical properties, heat treatment, and machinability.Outokumpu Type 630 is a martensitic age hardenable alloy of composition 17Cr-4Ni. The alloy has high strength and corrosion resistance similar to that of Type 304 stainless steel.
19.[标准] YMPRESS LASER S355MC - Formable Steel Alloy

YMPRESS激光S355MC-可成形钢合金

发布单位：
国际组织-ASM国际(IX-ASM)

标准状态：
现行

标准号：
ASM SA-750

发布时间：
2016-05-01

中标分类：
-

国标分类：
-

实施时间：

摘要： View Sample Alloy Digest Data Sheet (PDF)Since 1952, Alloy Digest has been the leading reference for materials property data on metals and alloys used throughout the world. Featuring graphs, charts and tables, these sheets give facts and figures on composition or characterization, physical and mechanical properties, heat treatment, and machinability.Ympress Laser grades are a family of hot-rolled structural steels that are optimized for laser cutting.
20.[标准] UGI 4057 AIR - Machinable Grade Austenitic Stainless Steel

UGI 4057空气可加工级奥氏体不锈钢

发布单位：
国际组织-ASM国际(IX-ASM)

标准状态：
现行

标准号：
ASM SS-1247

发布时间：
2016-07-01

中标分类：
-

国标分类：
-

实施时间：

摘要： View Sample Alloy Digest Data Sheet (PDF)Since 1952, Alloy Digest has been the leading reference for materials property data on metals and alloys used throughout the world. Featuring graphs, charts and tables, these sheets give facts and figures on composition or characterization, physical and mechanical properties, heat treatment, and machinability.UGI 4057 Air is a carbon martensitic stainless steel with nickel for aerospace applications.