铁路工程材料和零件_国内外标准网文献检索下载

1.[标准] 铁路隧道防排水材料第1部分：防水板和排水板

发布单位：
中国-行业标准-铁道(CN-TB)

标准状态：
现行

标准号：
TB/T 3360.1-2023

发布时间：
2023-02-27

中标分类：
S11 铁路 - 铁路建筑设备 - 线路构件

国标分类：
45.040 铁路工程 - 铁路工程材料和零件

实施时间：
2023-09-01
2.[标准] 铁路隧道防排水材料第2部分：止水带

发布单位：
中国-行业标准-铁道(CN-TB)

标准状态：
现行

标准号：
TB/T 3360.2-2023

发布时间：
2023-02-27

中标分类：
S11 铁路 - 铁路建筑设备 - 线路构件

国标分类：
45.040 铁路工程 - 铁路工程材料和零件

实施时间：
2023-09-01
3.[标准] 高速铁路支柱腕臂预配平台系统

发布单位：
中国-团体标准(CN-TUANTI)

标准状态：
现行

标准号：
T/CASME 587-2023

发布时间：
2023-07-28

中标分类：
S 铁路

国标分类：
45.040 铁路工程 - 铁路工程材料和零件

实施时间：
2023-08-01

摘要：范围:本文件适用于高速铁路接触网支柱腕臂装配用的自动预配平台系统;主要技术内容:本文件规定了高速铁路支柱腕臂预配平台系统的术语和定义、产品结构、基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存
4.[标准] Standard Specification for Carbon Steel Tires for Railway and Rapid Transit Applications

铁路和快速交通用碳钢轮胎标准规范

发布单位：
美国-美国材料与试验协会(US-ASTM)

标准状态：
现行

标准号：
ASTM A551/A551M-08(2023)

发布时间：
2023-03-15

中标分类：
-

国标分类：
45.040 铁路工程 - 铁路工程材料和零件

实施时间：

摘要： 1.1This specification covers seven classes of carbon steel tires for railway and rapid transit use.1.1.1Class A—For untreated driving tires for locomotives in passenger service.1.1.2Class AHT—For heat-treated driving tires for locomotives in passenger service.1.1.3Class B—For untreated driving tires for freight locomotives and tires for locomotive-truck, tender-truck, trailer and car wheels, and miscellaneous service.1.1.4Class BHT—For heat-treated driving tires for freight locomotives and tires for trailer wheels.1.1.5Class C—For untreated tires for switching locomotives.1.1.6Class CHT—For heat-treated driving tires and switching locomotives and tires for locomotive-trucks, tender-trucks, trailer and car wheels, and miscellaneous service.1.1.7Class DHT—For heat-treated driving tires for locomotives with light braking conditions, heavily loaded trailer tires, and rapid transit wheels where off-tread brakes are employed.1.2Supplementary requirements, including those in the general requirements of SpecificationA788/A788M, are provided for use when additional testing or inspection is desired. These shall apply only when specified individually by the purchaser in the order.1.3The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text and tables the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.1.4Unless the order specifies the applicable “M” specification designation, the tires shall be furnished to the inch-pound units.1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
5.[标准] 철도 차량 — 차륜축의 조립 및 검사 방법

铁路车辆轮对装配和试验方法

发布单位：
韩国-韩国标准(KR-KS)

标准状态：
现行

标准号：
KS R 9218-2023

发布时间：
2023-12-22

中标分类：
-

国标分类：
45.040 铁路工程 - 铁路工程材料和零件

实施时间：

摘要： 이 규격은 철도 차량(최고 속도 150km/h 이하)에 사용되는 차축과 고탄소강 일체 압연 차륜의 조립 및 검사 방법에 대하여 규정한다.
6.[标准] 城市轨道交通预埋槽道技术规程

发布单位：
中国-团体标准(CN-TUANTI)

标准状态：
现行

标准号：
T/SDRTS 003-2022

发布时间：
2022-11-04

中标分类：
-

国标分类：
45.040 铁路工程 - 铁路工程材料和零件

实施时间：
2022-11-07

摘要：主要技术内容:本文件规定了城市轨道交通预埋槽道及其应用的总则、规范性引用文件、术语和定义、基本要求、产品加工制作要求、产品性能与检验、施工及质量验收要求等。本文件适用于城市轨道交通工程
7.[标准] Standard Specification for Carbon and Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service

轨道交通和电气化铁路用热处理碳素钢和合金钢车轴

发布单位：
美国-美国材料与试验协会(US-ASTM)

标准状态：
现行

标准号：
ASTM A729/A729M-17(2022)

发布时间：
2022-09-01

中标分类：
-

国标分类：
45.040 铁路工程 - 铁路工程材料和零件

实施时间：

摘要： 1.1This specification covers heat-treated carbon and alloy steel axles for mass transit and commuter cars in electric and locomotive hauled railway service.1.2This specification is for solid design roller bearing axles with machined bodies.1.3Various axle designs are used for this service including motor and non-motor with either inboard or outboard journals.1.4Supplementary requirements including those in the general requirements of SpecificationA788/A788Mare provided for use when additional testing or inspection is desired. These shall apply only when specified individually by the purchaser in the order.1.5Unless the order specifies the applicable “M” specification designation, the axles shall be furnished to the inch-pound units.1.6The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined.1.7This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
8.[标准] 铁路路基土工合成材料应用技术规程

发布单位：
中国-团体标准(CN-TUANTI)

标准状态：
现行

标准号：
T/CRS C0601-2021

发布时间：
2021-12-31

中标分类：
P 土木、建筑

国标分类：
45.040 铁路工程 - 铁路工程材料和零件

实施时间：
2022-01-18

摘要：范围:适用于铁路路基应用土工合成材料的设计、施工及质量检验;主要技术内容:本规程以土工合成材料在铁路路基工程中的应用场景进行章节划分。全文共分9章，主要内容包括：总则，术语、符号和缩略语，基本规定，地基处理，加筋路堤，加筋土挡墙，基床加固与处理，路基防护和路基防排水，另有3个附录
9.[标准] 液压起拨道器

发布单位：
中国-团体标准(CN-TUANTI)

标准状态：
现行

标准号：
T/ZZB 2272-2021

发布时间：
2021-08-25

中标分类：
S24 铁路 - 铁路建筑设备 - 铁路养路机械使用与维修

国标分类：
45.040 铁路工程 - 铁路工程材料和零件

实施时间：
2021-09-25

摘要：主要技术内容:本文件规定了液压起拨道器（以下简称起拨道器）的术语和定义、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存及质量承诺。本文件适用于铁路有砟轨道维修、整修作业的以液压油缸驱动的额定起道力不低于392 kN（40吨）的起拨道器
10.[标准] 铁路路基现浇泡沫轻质土应用技术规程

发布单位：
中国-团体标准(CN-TUANTI)

标准状态：
现行

标准号：
T/CRS CO602-2021

发布时间：
2021-12-31

中标分类：
P 土木、建筑

国标分类：
45.040 铁路工程 - 铁路工程材料和零件

实施时间：
2022-01-18

摘要：范围:铁路路基现浇泡沫轻质土应用技术;主要技术内容:1.明确了规程的适用范围以及铁路路基现浇泡沫轻质土应用的基本原则。2.规定了现浇泡沫轻质土用原材料应满足的性能指标要求。3.明确了现浇泡沫轻质土规格的划分标准。4.规定了现浇泡沫轻质土不同应用条件的性能设计要求。5.规定了现浇泡沫轻质土路基设计荷载取值、稳定性验算方法及要求。6.明确了现浇泡沫轻质土路基主要结构形式及相应的构造要求。7.明确了现浇泡沫轻质土拌合物的制备、浇筑、养护及结构与构造施工的要求。8.规定了现浇泡沫轻质土原材料、施工过程及成品等检验及验收标准
11.[标准] Railway applications - Braking - Requirements for the brake system of trains hauled by locomotives

铁路应用 - 制动 - 火车车辆制动系统的要求

发布单位：
国际组织-欧洲标准化委员会(IX-CEN)

标准状态：
现行

标准号：
EN 14198:2016+A2:2021

发布时间：
2021-05-12

中标分类：
T24 车辆 - 汽车底盘与车身 - 制动系统

国标分类：
45.040 铁路工程 - 铁路工程材料和零件

45.060.01 铁路车辆 - 铁路车辆综合

实施时间：
2021-05-12

摘要： This European Standard specifies basic requirements for the braking of trains hauled by locomotives:-For trains hauled by locomotives and intended for use in general operation each vehicle is fitted with the traditional brake system with a brake pipe compatible with the UIC brake system.NOTEThis ensures technical compatibility of the brake function between vehicles of various origins in a train (see 5.4).-For trains hauled by locomotives and intended for use in fixed or predefined formation, the requirements on the vehicle and the train are necessary. In the case of a UIC brake system, this standard applies; if not, the EN 16185 series or the EN 15734 series applies.If concerned, the UIC brake architecture described in this standard (see 5.4) can be used for brakes for multiple unit train and high speed trains and urban rail described in the EN 13452 series, the EN 16185 series and the EN 15734 series.This European Standard also takes into account electrical and electronic control functions and additional brake systems like dynamic brakes and adhesion independent brakes.The brake system requirements, which are specific for on-track machines are set out in EN 14033 1.This European Standard does not apply to Urban Rail rolling stock braking system, which is specified by EN 13452 1.
12.[标准] Railway applications - Wheel/Rail friction management - Part 2-3: Properties and Characteristics - Adhesion materials

铁路应用.车轮/钢轨摩擦管理.第2-3部分:特性和特性.粘合材料

发布单位：
国际组织-欧洲标准化委员会(IX-CEN)

标准状态：
作废

标准号：
CEN/TS 15427-2-3:2021

发布时间：
2021-03-03

中标分类：
S11 铁路 - 铁路建筑设备 - 线路构件

国标分类：
45.040 铁路工程 - 铁路工程材料和零件

实施时间：
2021-03-03

摘要： This document specifies the requirements of adhesion materials intended to be applied to the interface between the wheel tread and the rail crown (active interface). It can be applied either directly or indirectly to the wheel tread or rail.It outlines the information required for most approval procedures, the method of testing and routine control/monitoring of the material.This document does not deal with Top of Rail materials. For Top of Rail materials see CEN/TS 15427-2-2:2021.
13.[标准] Railway applications - Wheel/Rail friction management - Part 1-3: Equipment and Application - Adhesion materials

铁路应用.车轮/钢轨摩擦管理.第1-3部分:设备和应用.粘合材料

发布单位：
国际组织-欧洲标准化委员会(IX-CEN)

标准状态：
作废

标准号：
CEN/TS 15427-1-3:2021

发布时间：
2021-03-03

中标分类：
S40/49 铁路 - 机车

国标分类：
45.040 铁路工程 - 铁路工程材料和零件

实施时间：
2021-03-03

摘要： This document is limited to specifying the requirements when applying adhesion material to the interface between the wheel tread and the crown of the rail, and includes both trainborne and trackside solutions.This document only covers the equipment and application of adhesion material to the active interface.This document defines:- the characteristics that systems for the application of adhesion materials of the wheel-rail interface shall achieve, together with applicable inspection and test methods to be carried out for verification;- all relevant terminology which is specific to the adhesion materials of the wheel-rail interface.This document only applies to the mainline railway.NOTE 1 This document can also be used for other railways, e.g urban rail.NOTE 2 Where technologies are used to influence the wheel/rail interface, other than the application of a material, this document is out of scope but can be used as guidance.
14.[标准] Railway applications - Wheelsets and bogies - Method of specifying the structural requirements of bogie frames

铁路应用 - 车轮和转向架 - 指定转向架框架结构要求的方法

发布单位：
国际组织-欧洲标准化委员会(IX-CEN)

标准状态：
作废

标准号：
EN 13749:2021

发布时间：
2021-03-24

中标分类：
S40 铁路 - 机车 - 机车综合

国标分类：
45.040 铁路工程 - 铁路工程材料和零件

实施时间：
2021-03-24

摘要： This document specifies the method to be followed to achieve a satisfactory design of bogie frames and includes design procedures, assessment methods, verification and manufacturing quality requirements. It is limited to the structural requirements of bogie frames including bolsters and axlebox housings. For the purpose of this document, these terms are taken to include all functional attachments, e.g. damper brackets.
15.[标准] Railway applications - Braking - Wheel slide protection

铁路应用 - 制动 - 车轮滑块保护

发布单位：
国际组织-欧洲标准化委员会(IX-CEN)

标准状态：
现行

标准号：
EN 15595:2018/AC:2021

发布时间：
2021-02-17

中标分类：
T20/29 车辆 - 汽车底盘与车身

国标分类：
45.040 铁路工程 - 铁路工程材料和零件

实施时间：
2021-02-17
16.[标准] Railway applications - Pneumatic half couplings

铁路应用 - 气动半联轴器

发布单位：
国际组织-欧洲标准化委员会(IX-CEN)

标准状态：
现行

标准号：
EN 15807:2021

发布时间：
2021-03-10

中标分类：
J10/29 机械 - 通用零部件

国标分类：
45.040 铁路工程 - 铁路工程材料和零件

实施时间：
2021-03-10

摘要： This document applies to pneumatic half couplings designed to couple either the brake pipes or main reservoir pipes of railway vehicles, without taking the type of vehicles and track-gauge into consideration.This document gives the requirements for the design, dimensions, testing and quality assurance of pneumatic half couplings.
17.[标准] Railway applications - Braking - Automatic variable load sensing devices

铁路应用 - 制动 - 自动变量负载检测装置

发布单位：
国际组织-欧洲标准化委员会(IX-CEN)

标准状态：
现行

标准号：
EN 15625:2021

发布时间：
2021-02-10

中标分类：
S90 铁路 - 铁路运输 - 铁路运输综合

国标分类：
45.040 铁路工程 - 铁路工程材料和零件

实施时间：
2021-02-10

摘要： This document applies to automatic variable load sensing devices designed to continuously sense the load of a railway vehicle and provide a pneumatic output signal that can be used by a relay valve for the automatic variation of the air pressure used for brake applications, thereby adjusting the brake force accordingly to achieve the required brake performance.This document specifies the requirements for the design, testing and quality assurance of automatic variable load sensing devices.The requirements of this document are not fully applicable for tests on vehicle level (vehicle homologation tests).
18.[标准] Railway applications - Braking - Empty-loaded changeover devices

铁路应用 - 制动 - 空载切换装置

发布单位：
国际组织-欧洲标准化委员会(IX-CEN)

标准状态：
现行

标准号：
EN 15624:2021

发布时间：
2021-02-10

中标分类：
S90/99 铁路 - 铁路运输

国标分类：
45.040 铁路工程 - 铁路工程材料和零件

实施时间：
2021-02-10

摘要： This document is applicable to empty-loaded changeover devices. The purpose of such devices is the generation of a load-related signal which causes the brake performance to be adjusted to the current vehicle mass.The manually operated empty-loaded changeover devices change their output signal according to the position of the handles which together with the associated changeover plates serve as interfaces. The changeover plates read the required information for the operation of the empty-loaded changeover devices, i.e. brake weights for each position and the relevant changeover mass of the vehicle.Automatic empty-loaded changeover devices sense a certain load threshold of the vehicle to automatically adjust the output signal when the mass of a vehicle reaches a defined value. This threshold is the changeover mass. Below this mass the vehicle’s brake system provides a reduced brake force. For the changeover mass or more the high brake force applies.This document specifies the requirements for the design, testing and quality assurance of empty-loaded changeover devices.
19.[标准] Railway applications - Axleboxes - Performance testing

铁路应用 - 车轴 - 性能测试

发布单位：
国际组织-欧洲标准化委员会(IX-CEN)

标准状态：
现行

标准号：
EN 12082:2017+A1:2021

发布时间：
2021-06-23

中标分类：
S90/99 铁路 - 铁路运输

国标分类：
45.040 铁路工程 - 铁路工程材料和零件

实施时间：
2021-06-23

摘要： This European Standard specifies the principles and methods for a rig performance test of the system of axlebox rolling bearing(s), housing, seal(s) and grease. Test parameters and minimum performance requirements for vehicles in operation on main lines are specified. Different test parameters and performance requirements may be selected for vehicles in operation on other networks (e.g. urban rail). This standard is historically developed for outboard applications but can be used for vehicles with other bearing arrangements (e.g.: inboard application or single wheels).It gives some possible examples where a "sequenced performance test" addresses the broad range of different service conditions within a specific application or vehicle platform into account.It describes in detail the water tightness test and basic principles and minimum requirements for a field test.This European Standard only applies to axleboxes equipped with rolling bearings and greases according to EN 12080 and EN 12081.
20.[标准] 철도신호 보안부품 — 충격시험 방법

铁路信号用零件.冲击试验方法

发布单位：
韩国-韩国标准(KR-KS)

标准状态：
现行

标准号：
KS R 9187-2021

发布时间：
2021-09-23

中标分类：
-

国标分类：
45.040 铁路工程 - 铁路工程材料和零件

实施时间：

摘要： 이 규격은 철도 신호 보안 설비의 신호기, 릴레이 설치 장치, 기구 상자, 동력 전철기, 레일 등에 설치하는 기기 및 부품에 대하여 충격 시험기에 설치하여 실시하는 일반적인 충격 시험 방법에 대하여 규정한다. 다만 차량에 탑재하는 신호 보안 부품에는 적용하지 않는다.