铰链、孔眼和其他关节连接件_国内外标准网文献检索下载

1.[标准] Standard Test Method for Determining Tribomechanical Properties of Grease Lubricated Plastic Socket Suspension Joints Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

用高频线性振荡（SRV）试验机测定润滑脂润滑塑料承插悬挂接头的摩擦学性能的标准试验方法

发布单位：
美国-美国材料与试验协会(US-ASTM)

标准状态：
现行

标准号：
ASTM D7420-23

发布时间：
2023-11-01

中标分类：
-

国标分类：
21.080 机械系统和通用件 - 铰链、孔眼和其他关节连接件

21.260 机械系统和通用件 - 润滑系统

实施时间：

摘要： 1.1This test method covers a procedure for determining the friction and wear behavior of grease lubricated plastic socket suspension joints, for validation of suspension joint greases and quality inspection for those greases under high-frequency linear-oscillation motion using the SRV test machine.1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ======5.1This test method can be used to quickly determine the lubricating ability of greases lubricating automotive plastic socket suspension joints. This test method has found wide application in qualifying greases used in chassis systems. This test method is a material and application oriented approach based on inputs from field experiences for characterizing the tribological behavior (friction and wear) using random, discrete, and constant parameter combinations. Users of this test method should determine whether results correlate with field performance or other applications prior to commercialization.
2.[标准] 건축용 턴버클

建筑用扣

发布单位：
韩国-韩国标准(KR-KS)

标准状态：
现行

标准号：
KS F 4521-2023

发布时间：
2023-12-29

中标分类：
-

国标分类：
21.080 机械系统和通用件 - 铰链、孔眼和其他关节连接件

实施时间：

摘要： 이 규격은 건축물의 가새 등에 사용되는 터언버클에 대하여 규정한다.
3.[标准] Standard Test Method for Determining Tribomechanical Properties of Grease Lubricated Plastic Socket Suspension Joints Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

使用高频线性振荡（SRV）试验机确定润滑脂润滑塑料插座悬架接头的部件力学性能的标准试验方法

发布单位：
美国-美国材料与试验协会(US-ASTM)

标准状态：
历史

标准号：
ASTM D7420-18

发布时间：
2018-12-01

中标分类：
-

国标分类：
21.080 机械系统和通用件 - 铰链、孔眼和其他关节连接件

21.260 机械系统和通用件 - 润滑系统

实施时间：

摘要： 1.1This test method covers a procedure for determining the friction and wear behavior of grease lubricated plastic socket suspension joints, for validation of suspension joint greases and quality inspection for those greases under high-frequency linear-oscillation motion using the SRV test machine.1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ======5.1This test method can be used to quickly determine the lubricating ability of greases lubricating automotive plastic socket suspension joints. This test method has found wide application in qualifying greases used in chassis systems. This test method is a material and application oriented approach based on inputs from field experiences for characterizing the tribological behavior (friction and wear) using random, discrete, and constant parameter combinations. Users of this test method should determine whether results correlate with field performance or other applications prior to commercialization.
4.[标准] Standard Test Method for Determining Tribomechanical Properties of Grease Lubricated Plastic Socket Suspension Joints Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

使用高频线性振荡（SRV）试验机确定润滑脂润滑塑料插座悬架接头的部件力学性能的标准试验方法

发布单位：
美国-美国材料与试验协会(US-ASTM)

标准状态：
历史

标准号：
ASTM D7420-17

发布时间：
2017-11-01

中标分类：
-

国标分类：
21.080 机械系统和通用件 - 铰链、孔眼和其他关节连接件

21.260 机械系统和通用件 - 润滑系统

实施时间：

摘要： 1.1This test method covers a procedure for determining the friction and wear behavior of grease lubricated plastic socket suspension joints, for validation of suspension joint greases and quality inspection for those greases under high-frequency linear-oscillation motion using the SRV test machine.1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ======5.1This test method can be used to quickly determine the lubricating ability of greases lubricating automotive plastic socket suspension joints. This test method has found wide application in qualifying greases used in chassis systems. This test method is a material and application oriented approach based on inputs from field experiences for characterizing the tribological behavior (friction and wear) using random, discrete, and constant parameter combinations. Users of this test method should determine whether results correlate with field performance or other applications prior to commercialization.
5.[标准] 碳钢膨胀螺栓连接副

发布单位：
中国-广东省地方标准(CN-DB44)

标准状态：
作废

标准号：
DB44/T 1377-2014

发布时间：
2014-08-14

中标分类：
J13 机械 - 通用零部件 - 紧固件

国标分类：
21.080 机械系统和通用件 - 铰链、孔眼和其他关节连接件

实施时间：
2014-11-14

摘要：本标准规定了碳钢膨胀螺栓连接副的术语和定义、结构型式及标记、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于以碳钢为原材料，由螺栓、螺母、垫圈、胀套等部件组成，主要应用于混凝土或砖墙等结构上安装与连接附加设备及轻便简易结构的碳钢膨胀螺栓连接副
6.[标准] 地弹簧

发布单位：
中国-行业标准-轻工(CN-QB)

标准状态：
现行

标准号：
QB/T 2697-2013

发布时间：
2013-12-31

中标分类：
Y71 轻工、文化与生活用品 - 五金制品 - 建筑五金

国标分类：
21.080 机械系统和通用件 - 铰链、孔眼和其他关节连接件

实施时间：
2014-07-01
7.[标准] Standard Test Method for Determining Tribomechanical Properties of Grease Lubricated Plastic Socket Suspension Joints Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

使用高频线性振荡（SRV）试验机确定润滑脂润滑塑料插座悬架接头的部件力学性能的标准试验方法

发布单位：
美国-美国材料与试验协会(US-ASTM)

标准状态：
历史

标准号：
ASTM D7420-11

发布时间：
2011-12-01

中标分类：
-

国标分类：
21.080 机械系统和通用件 - 铰链、孔眼和其他关节连接件

21.260 机械系统和通用件 - 润滑系统

实施时间：

摘要： 1.1 This test method covers a procedure for determining the friction and wear behavior of grease lubricated plastic socket suspension joints, for validation of suspension joint greases and quality inspection for those greases under high-frequency linear-oscillation motion using the SRV test machine.1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. ====== Significance And Use ======This test method can be used to quickly determine the lubricating ability of greases lubricating automotive plastic socket suspension joints. This test method has found wide application in qualifying greases used in chassis systems. This test method is a material and application oriented approach based on inputs from field experiences for characterizing the tribological behavior (friction and wear) using random, discrete, and constant parameter combinations. Users of this test method should determine whether results correlate with field performance or other applications prior to commercialization.
8.[标准] Standard Test Method for Determining Tribomechanical Properties of Grease Lubricated Plastic Socket Suspension Joints Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

使用高频线性振荡（SRV）试验机确定润滑脂润滑塑料插座悬架接头的部件力学性能的标准试验方法

发布单位：
美国-美国材料与试验协会(US-ASTM)

标准状态：
历史

标准号：
ASTM D7420-10

发布时间：
2010-03-01

中标分类：
-

国标分类：
21.080 机械系统和通用件 - 铰链、孔眼和其他关节连接件

21.260 机械系统和通用件 - 润滑系统

实施时间：

摘要： 1.1 This test method covers a procedure for determining the friction and wear behavior of grease lubricated plastic socket suspension joints, for validation of suspension joint greases and quality inspection for those greases under high-frequency linear-oscillation motion using the SRV test machine.1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. ====== Significance And Use ======This test method can be used to quickly determine the lubricating ability of greases lubricating automotive plastic socket suspension joints. This test method has found wide application in qualifying greases used in chassis systems. This test method is a material and application oriented approach based on inputs from field experiences for characterizing the tribological behavior (friction and wear) using random, discrete, and constant parameter combinations. Users of this test method should determine whether results correlate with field performance or other applications prior to commercialization.
9.[标准] 건축용 턴버클

螺丝扣建筑

发布单位：
韩国-韩国标准(KR-KS)

标准状态：
现行

标准号：
KS F 4521-2003(2018)

发布时间：
2003-11-24

中标分类：
-

国标分类：
21.080 机械系统和通用件 - 铰链、孔眼和其他关节连接件

实施时间：

摘要： 이 규격은 건축물의 가새 등에 사용되는 턴버클에 대 하여 규정한다.
10.[标准] 抓斗挖泥船专用设备修理技术要求第1部分：旋转中心轴、转车轴、传动轴

发布单位：
中国-行业标准-交通(CN-JT)

标准状态：
现行

标准号：
JT/T 177.1-2002

发布时间：
2002-03-07

中标分类：
R33 公路、水路运输 - 船舶维护与修理 - 船舶专用装备维护修理

国标分类：
21.080 机械系统和通用件 - 铰链、孔眼和其他关节连接件

实施时间：
2002-05-01
11.[标准] 旋转接头技术条件

发布单位：
中国-行业标准-轻工(CN-QB)

标准状态：
现行

标准号：
QB/T 2481-2000

发布时间：
2000-06-13

中标分类：
J10/29 机械 - 通用零部件

国标分类：
21.080 机械系统和通用件 - 铰链、孔眼和其他关节连接件

实施时间：
2000-10-01
12.[标准] 铰链尺寸

发布单位：
中国-行业标准-机械(CN-JB)

标准状态：
现行

标准号：
JB/T 9162.23-1999

发布时间：
1999-05-20

中标分类：
W60/69 纺织 - 针织

国标分类：
21.080 机械系统和通用件 - 铰链、孔眼和其他关节连接件

实施时间：
2000-01-01
13.[标准] Classification for Hardware for Wood Fencing (Withdrawn 2000)

木栅栏用五金件分类（2000年撤销）

发布单位：
美国-美国材料与试验协会(US-ASTM)

标准状态：
作废

标准号：
ASTM F1222-89(1994)

发布时间：
1994-01-01

中标分类：
-

国标分类：
21.080 机械系统和通用件 - 铰链、孔眼和其他关节连接件

实施时间：

摘要： 1.1 This standard covers the functional classification of hardware for all types of wood fencing, including fences fabricated with combinations of wood and other materials.1.2 The classification system defined herein is intended only to standardize the grouping and identification of wood fence hardware items so that references made in specifications and procurement documents are uniformly understood throughout the industry. This classification does not specify quality levels or testing requirements for any hardware item.
14.[标准] 电气箱铰链

发布单位：
中国-行业标准-船舶(CN-CB)

标准状态：
现行

标准号：
CB 374-1965

发布时间：
1965-01-01

中标分类：
U69 船舶 - 船舶电气、观通、导航设备 - 船用电气安装件

国标分类：
21.080 机械系统和通用件 - 铰链、孔眼和其他关节连接件

实施时间：
1965-01-01
15.[标准] The Spring Traps Approval (No. 2) Order (Northern Ireland) 1961

1961年（北爱尔兰）春季陷阱批准令（第2号）

发布单位：
英国-英国技术法规(GB-LEX)

标准状态：
现行

标准号：
1961 No. 235

发布时间：

中标分类：
B33 农业、林业 - 经济作物 - 油料作物与产品

国标分类：
21.080 机械系统和通用件 - 铰链、孔眼和其他关节连接件

实施时间：
16.[标准] The Spring Traps Approval Order (Northern Ireland) 1961

1961年《春季陷阱批准令》（北爱尔兰）

发布单位：
英国-英国技术法规(GB-LEX)

标准状态：
现行

标准号：
1961 No. 234

发布时间：

中标分类：
X60/69 食品 - 食品发酵、酿造

国标分类：
21.080 机械系统和通用件 - 铰链、孔眼和其他关节连接件

实施时间：
17.[标准] The Spring Traps Approval Order (Northern Ireland) 1966

1966年春季陷阱批准令（北爱尔兰）

发布单位：
英国-英国技术法规(GB-LEX)

标准状态：
现行

标准号：
1966 No. 310

发布时间：

中标分类：
X60/69 食品 - 食品发酵、酿造

国标分类：
21.080 机械系统和通用件 - 铰链、孔眼和其他关节连接件

实施时间：
18.[标准] The Import Duties (Temporary Exemptions) (No. 10) Order 1970

1970年进口税（临时豁免）（第10号）令

发布单位：
英国-英国技术法规(GB-LEX)

标准状态：
现行

标准号：
1970 No. 1591

发布时间：

中标分类：
H80 冶金 - 半金属与半导体材料 - 半金属与半导体材料综合

国标分类：
21.080 机械系统和通用件 - 铰链、孔眼和其他关节连接件

实施时间：
19.[标准] The Import Duties (Temporary Exemptions) (No. 7) Order 1970

1970年进口税（临时豁免）（第7号）令

发布单位：
英国-英国技术法规(GB-LEX)

标准状态：
现行

标准号：
1970 No. 934

发布时间：

中标分类：
H80 冶金 - 半金属与半导体材料 - 半金属与半导体材料综合

国标分类：
21.080 机械系统和通用件 - 铰链、孔眼和其他关节连接件

实施时间：
20.[标准] The Import Duties (Temporary Exemptions) (No. 1) Order 1970

1970年进口税（临时豁免）（第1号）令

发布单位：
英国-英国技术法规(GB-LEX)

标准状态：
现行

标准号：
1970 No. 269

发布时间：

中标分类：
H80 冶金 - 半金属与半导体材料 - 半金属与半导体材料综合

国标分类：
21.080 机械系统和通用件 - 铰链、孔眼和其他关节连接件

实施时间：