防护设备

摘要： 本文件规定了带电作业用屏蔽服装的技术要求、检验规则、标志、包装、贮存和使用，给出了服装分类说明，描述了试验方法。
本文件适用于在交流110（66)kV～1 000 kV、直流±50 kV～±1 100 kV等电压等级的电气设备上进行带电作业时，作业人员所穿戴的屏蔽服装的设计、生产、试验及使用。
注： 带电作业用屏蔽服装包括上衣、裤子、手套、袜子、鞋子和面罩。

摘要： 本文件规定了公安机关海防警用船艇的分类与标识、技术要求及执法装备配备要求。本文件适用于公安机关海防管理工作使用的警用船艇。公安机关海防警用无人船艇参照本文件执行。

摘要： 本文件规定了警用防刺服产品的术语和定义、分类和代号、技术要求、试验方法、检验规则、检验报告要求及包装、运输和贮存。
本文件适用于警用防刺服产品的研发、生产、检验和验收。

摘要： 本文件规定了警用防暴臂盾产品的术语和定义、分类和代号、技术要求、试验方法、检验规则、包装、运输和贮存。
本文件适用于警用防暴臂盾的研发、生产、检验和验收。

摘要： 1.1This practice covers the informational content of labels in or on chemical protective clothing. This practice also addresses putting label content on chemical protective clothing packaging when it is not practical to attach the label directly to the chemical protective clothing or print it on the chemical protective clothing item based on the size or type of the product.1.2This practice describes the recommended format and minimal content of the information to be included on the labels used for chemical protective clothing.1.2.1For the purposes of this practice, chemical protective clothing includes but is not limited to: suits, garments, and partial-body garments such as hoods, aprons, sleeve protectors, gloves, and footwear.1.2.2Protective clothing is defined as any single item or combination of items used for the purpose of isolating parts of the body from direct contact with a potential hazard. It does not include individual parts of a protective clothing item designed to be worn as part of another item (for example, a face shield or lens) unless it may be worn independently of the other items and still be used in a protective manner. For example, a glove or boot, unless permanently attached to a garment or suit, would be considered a protective clothing item requiring labeling, while a visor or vent valve would not. In summary, the intent of this practice is to only require labeling of parts of an ensemble that can be used independently for the protection of the user.1.3This practice does not cover user information provided by means other than item labeling such as instructions, informational packets, brochures, or other written means. User information is partly addressed in PracticeF2061.1.4This practice excludes those items covered under 16 CFR 303 unless specifically designed for use as chemical protective clothing.1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ======3.1This practice contains the recommendations for minimal informational requirements for the identification of chemical protective clothing items. It is intended to provide the user with some of the basic information necessary for the proper selection and use of the chemical protective clothing.3.2For some items of chemical protective clothing, such as disposable chemical protective gloves, it is recognized that it is not practical that the labeling information be provided directly on the product. Therefore, it is permissible that this information be provided on the direct packaging that contains the product. As an example, it is possible to put the recommended product information on the dispenser box that contains multiple pairs of disposable chemical protective gloves.3.3Additional information beyond the content recommended by this practice is permitted to be applied to the label. This additional label content can include statements indicating compliance with specific standards, warnings, limitations associated with the product, and certain types of use, care, and maintenance information as addressed in PracticeF2061.3.4Rules and regulations in Title 16 Code of Federal Regulations Part 303 cover the identification of fibers in textile products, specifically the disclosure of the fiber content and the manner of labeling products for purposes of applying tariffs on imported products and for informing the consumer. This practice is not intended to be a replacement for the requirements in 16 CFR 303, which may still apply to certain types of chemical protective clothing.

摘要： 1.1These practices are intended for evaluating protective ensembles and ensemble elements to determine the suitability of the ensemble or ensemble components in a work environment on the basis of its comfort, fit, function, and durability.1.1.1Option Ais a manned exercise scenario intended to evaluate the impact of the ensembles and ensemble elements on wearer mobility when worn in a series of different physical exercises that are intended to evaluate the range of motion permitted by the ensemble or ensemble element.1.1.2Option Bis a manned work task scenario intended to determine the impact of the ensemble or ensemble element on wearer function.1.1.3Recording the length of time used to complete these tasks provides a means for quantifying the impact of the ensemble or ensemble element on the wearer function.1.1.4Relating the ability of the subject to completely perform all tasks provides a qualitative assessment for the impact of the ensemble or ensemble element on wearer function.1.1.5The optional evaluation of ensembles or ensemble elements for liquid or vapor integrity following the exercise protocols provides a basis for evaluating the impact of wearing on ensemble or ensemble element integrity.1.1.6The optional evaluation of donning and doffing instructions provides a basis for evaluating the potential for errors which may impact the effectiveness of the ensemble.1.2These practices apply to protective ensembles and certain ensemble elements that are used for protection against different chemical, biological, physical, thermal, and other hazards, but are primarily useful for ensembles that include barrier layers such as liquid splash protective ensembles used for protection against hazardous chemicals or highly infectious diseases, or vapor protective ensembles used for chemical protection.1.3The values as stated in inch-pound units are to be regarded as the standard. The values in parentheses are given for information only.1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.Specific safety precautions are given in Section7.1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ======5.1These practices establish standard procedures designed for qualitatively evaluating the performance characteristics of protective ensembles or ensemble elements in terms of comfort, fit, function, and durability. Limited quantitative measures are also provided.5.2These practices are suitable for both end users and manufacturers to evaluate performance characteristics of protective ensembles and ensemble elements.5.2.1End users may use these practices to qualitatively determine how well protective ensembles and ensemble elements (gloves, boots, and respirators) and ensemble components (communications systems, cooling devices, and undergarments) meet their particular application.5.2.2Manufacturers of protective ensembles and ensemble elements may use these practices to determine the qualitative performance characteristics in existing or proposed designs.5.3Option A permits aqualitativeevaluation of protective ensemble or ensemble element mobility by subjecting the protective ensemble to a manned exercise routine. Option B permits aqualitativeevaluation of protective ensemble or ensemble element function. Each procedure can be used to assess ensemble comfort and fit by relating test subject responses and by comparing the dimensions and weights of both the test subject and suit.Note 1:The accumulation of suit and human subject dimension data may eventually be used by manufacturers or end users in standards to improve the sizing of chemical protective suits and the integration of ensemble components in protective ensembles.5.4The use of these practices is primarily for qualitative purposes only. In general, results from use of these practices on one type of ensemble may not be comparable to other test results on a different ensemble due to the subjective nature of test results.5.5Certain aspects of these practices are quantitative. The effect of wearing the ensemble or ensemble element can also be assessed by the measurement of the time to complete the exercise and tasks defined in Option A and Option B, respectively. Further, liquid penetration resistance testing is applied to liquid splash protective ensembles in accordance with Test MethodF1359/F1359M, and pressure testing is applied to vapor protective ensembles in accordance with Test MethodF1052to determine if the exercises or tasks affect the durability of the protective ensemble or ensemble element to provide acceptable levels of integrity. Depending on the ensemble configuration, specific evaluations and assessments are used to determine the effect of the ensemble or ensemble element on the wearer’s visual acuity, their field of vision, and their ability to remove and reinsert their hands into gloves when attached to encapsulating protective ensembles.5.6Quantitative practices for determining the specific impact of the protective ensemble on the wearer’s range of motion are found in PracticeF3031.5.7These practices are not intended to assess heat stress resulting from wearing a protective ensemble, although thermal comfort of the suit ensemble may be subjectively evaluated. Use PracticeF2668for measuring the physiological impact of wearing ensembles or ensemble elements on wearers.5.8It is recommended that end users and manufacturers of protective ensembles and ensemble elements consider these practices to beminimumprocedures for evaluating ensemble and ensemble element performance characteristics. Additional tests and procedures that relate directly to their particular application are also recommended where appropriate. Each facility performing these practices is encouraged to establish its own criteria for assessing acceptable ensemble performance.

摘要： This document sets out the best practices for the selection and use of PPE designed to provide protection for firefighters while carrying out their duties.The PPE covered in this document is intended for firefighting personnel exposed to risks associated with but not necessarily limited to the following activities:—？structural firefighting;—？wildland firefighting;—？incidents involving hazardous materials;—？incidents involving motor vehicle;—？urban search and rescue.The purpose of this document is to highlight the main areas that a fire service needs to consider when providing PPE to its members. This document is a supplement to the information provided in the PPE standards or used in conjunction with them. Most paragraphs of the document contain bullet lists, these lists are provided for guidance only and they are not exhaustive.Cleaning, inspection and repair of firefighters' personal protective equipment (including care and maintenance) are covered by ISO 23616.

摘要： 本文件规定了警用防暴头盔产品的术语和定义、分类和代号、技术要求、试验方法、检验规则、质量保证规定、包装、运输和贮存。
本文件适用于警用防暴头盔产品的生产、检验与验收。

摘要： 本文件规定了户外运动服装冲锋衣的产品号型、要求、试验方法、抽样规则、判定规则和产品使用说明、包装、运输、贮存。本文件适用于鉴定以纺织面料为主生产的冲锋衣的品质。本文件不适用于年龄在36个月及以下的婴幼儿冲锋衣。

摘要： 本文件规定了带刚性导轨的自锁器的技术要求、永久标识和制造商提供的信息，描述了带刚性导轨自锁器的测试方法和检验规则。本文件适用于与垂直方向成15°夹角之内安装的带刚性导轨的自锁器。

摘要： 本文件规定了日用防护聚乙烯手套(以下简称“手套”)的分类、要求、检验规则、标志、包装、运输和贮存，描述了其试验方法。本文件适用于以吹塑法或流延法生产的聚乙烯薄膜为主要原料，经压制热封工艺制成的防护用手套的生产、检验和销售等环节。

摘要： 本文件界定了化学品及微生物防护手套的术语和定义，规定了技术要求、标识和制造商提供的信息，描述了测试方法。本文件适用于防护化学品及微生物危害的手套。