振动和冲击(与人有关的)_国内外标准网文献检索下载

1.[标准] Mechanical vibration and shock — Coupling forces at the man-machine interface for hand-transmitted vibration — Part 2: Evaluation of coupling forces

机械振动和冲击.手动传递振动的人机界面处的耦合力.第2部分:耦合力的评估

发布单位：
国际组织-国际标准化组织(IX-ISO)

标准状态：
现行

标准号：
ISO/TS 15230-2:2023

发布时间：
2023-01-31

中标分类：
-

国标分类：
13.160 环保、保健和安全 - 振动和冲击(与人有关的)

实施时间：

摘要： This document describes a coupling-force-dependent weighting of the r.m.s. value to the frequency-weighted acceleration, ahw.The procedure only applies to normal gripping situations (embracing a handle). If only part surfaces of the hand are exposed to vibration, the procedure is not applicable.The evaluation methods defined in this document are intended to enable research.This document provides guidance on an additional procedure to that defined in ISO？5349-1 for measuring and reporting hand-transmitted vibration exposures by taking into account the coupling force exerted on the vibrating surface.This document is intended to facilitate future research on hand-arm vibration risks and to complement data collected using the ISO？5349-1 methodology.This document does not apply as an alternative to ISO？5349-1. The data derived from this document does not apply to perform tasks in accordance with national regulations, guidelines or recommendations for workplace vibration or machinery vibration emissions. This document does not apply to the legal obligations related to the protection of workers from hand-arm vibration in the workplace and the declaration of vibration emissions from machinery.The methodology defined in this document is based only on biomechanical relationships between vibration transmission to the hand-arm system as a function of total forces. The influence of contact force and pressure on the surface of the hand remains unconsidered and requires further research.
2.[标准] 기계적 진동 — 신경 기능 장애 평가를 위한 진동 촉감 인지 역치 — 제2부: 손끝 측정의 분석과 해석

机械振动.神经功能障碍评估用可控振动感知阈值.第2部分:指尖测量的分析和解释

发布单位：
韩国-韩国标准(KR-KS)

标准状态：
现行

标准号：
KS B ISO 13091-2-2023

发布时间：
2023-06-23

中标分类：
-

国标分类：
13.160 环保、保健和安全 - 振动和冲击(与人有关的)

实施时间：

摘要： 이 표준은 진동 촉감 인지 역치(문턱값) 및 역치 변동을 분석하고 해석하기 위한 방법과 절차에 대하여 규정한다.
3.[标准] 기계적 진동과 충격 — 말초 혈관 기능의 평가를 위한 냉간 자극 시험 — 제2부: 손가락 최고 혈압의 측정과 평가

机械振动和冲击评定外周血管功能的冷激发试验第2部分:手指收缩压的测量和评定

发布单位：
韩国-韩国标准(KR-KS)

标准状态：
现行

标准号：
KS B ISO 14835-2-2023

发布时间：
2023-12-29

中标分类：
-

国标分类：
13.160 环保、保健和安全 - 振动和冲击(与人有关的)

实施时间：

摘要： 이 표준은 손가락 최고 혈압측정을 위한 국부 냉간자극 방법, 측정 실행 과정, 측정결과 보고서 작성법 사항에 대하여 규정
4.[标准] 기계적 진동과 충격 — 전신 진동에 피폭된 인체의 평가 — 제4부: 고정-안내 궤도 수송시스템의 승객과 승무원의 안락도에 미치는 진동과 회전 운동의 영향 평가를 위한 지침

机械振动和冲击——人体暴露于全身振动的评估——第4部分:固定导轨运输系统中振动和旋转运动对乘客和机组人员舒适性影响的评估指南

发布单位：
韩国-韩国标准(KR-KS)

标准状态：
现行

标准号：
KS B ISO 2631-4-2023

发布时间：
2023-12-29

中标分类：
-

国标分类：
13.160 环保、保健和安全 - 振动和冲击(与人有关的)

实施时间：

摘要： 이 표준은 고정된 안내도로 시스템의 승객 및 승무원의 안락도에 대한 기계진동의 영향 평가에 대한 지침에 대하여 규정
5.[标准] 景观环境用水中微塑料的测定傅里叶变换显微红外光谱法

发布单位：
中国-团体标准(CN-TUANTI)

标准状态：
现行

标准号：
T/CSTM 00563-2022

发布时间：
2022-02-21

中标分类：
Z 环境保护

国标分类：
13.160 环保、保健和安全 - 振动和冲击(与人有关的)

实施时间：
2022-05-21

摘要：范围:本文件规定了傅里叶变换显微红外光谱法测定景观环境用水中微塑料的术语和定义、方法原理、仪器设备与试剂、测试样品制备、测定步骤、结果分析与计算等。本文件适用于景观环境用水中尺寸范围在50 μm-5 mm之间的微塑料的形状、颜色、尺寸、数量和聚合物种类的测定。其他水环境中微塑料的测定可参考本方法;主要技术内容:本文件规定了傅里叶变换显微红外光谱法测定景观环境用水中微塑料的术语和定义、方法原理、仪器设备与试剂、测试样品制备、测定步骤、结果分析与计算等。本文件适用于景观环境用水中尺寸范围在50 μm-5 mm之间的微塑料的形状、颜色、尺寸、数量和聚合物种类的测定。其他水环境中微塑料的测定可参考本方法
6.[标准] Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 13: Fastener driving tools (ISO 28927-13:2022)

便携式手提电动工具振动发射评定试验方法第13部分:紧固件驱动工具

发布单位：
国际组织-欧洲标准化委员会(IX-CEN)

标准状态：
现行

标准号：
EN ISO 28927-13:2022

发布时间：
2022-03-16

中标分类：
J40/49 机械 - 工艺装备

国标分类：
13.160 环保、保健和安全 - 振动和冲击(与人有关的)

25.140.10 手持工具 - 气动工具

实施时间：
2022-03-16

摘要： This document specifies a laboratory method for measuring the vibration at the handle of fastener driving tools. It is a type test procedure for establishing the vibration value on the handle of a hand-held power tool operating under a specified load.This document is applicable to fastener driving tools driven pneumatically or by other means, using nails, staples or pins.This document is applicable to tools with single sequential actuation, contact actuation, contact actuation with automatic reversion or continual contact actuation (see Figures 1 to 3).This document is not applicable to tools operating in full sequential mode due to their much longer intervals in between individual actuations. However, to provide an indication for comparison of different tools of this type (see Figures 4 and 5), Annex C provides informative guidance.NOTE Today current knowledge does not allow any conclusions regarding physiological and pathological effects between isolated shocks and continuous shock sequences, and their repetition rates.
7.[标准] Mechanical vibration — Laboratory method for evaluating vehicle seat vibration — Part 2: Application to railway vehicles

机械振动.评估车辆座椅振动的实验室方法.第2部分:铁路车辆的应用

发布单位：
国际组织-国际标准化组织(IX-ISO)

标准状态：
现行

标准号：
ISO 10326-2:2022

发布时间：
2022-03-29

中标分类：
-

国标分类：
45.060.01 铁路车辆 - 铁路车辆综合

13.160 环保、保健和安全 - 振动和冲击(与人有关的)

实施时间：

摘要： This document defines specifications covering laboratory tests for seats designed for passengers and crew in railway tractive and trailer vehicles.It concerns tri-axial rectilinear vibration within the frequency range 0,5？Hz to 50？Hz. It specifies the input test vibration to be used at seat testing.This document makes it possible to characterize, in the form of frequency response functions, the manner in which vibration is transmitted to the seat occupant. It also provides an estimator showing the behaviour of the seat in terms of dynamic comfort perceived by the seated person.Different types of excitations can be used and are described depending on knowledge of the vibration environment encountered by the seat and the capability of the vibration simulator.
8.[标准] Mechanical vibration — Uncertainty of the measurement and evaluation of human exposure to vibration

机械振动.人体暴露于振动的测量和评估的不确定度

发布单位：
国际组织-国际标准化组织(IX-ISO)

标准状态：
现行

标准号：
ISO/TS 22704:2022

发布时间：
2022-04-06

中标分类：
-

国标分类：
13.160 环保、保健和安全 - 振动和冲击(与人有关的)

实施时间：

摘要： This document specifies methods for determining the uncertainty of the measurement and evaluation of human exposure to vibration. It applies to measurements of vibration quantities (measurands), calculated following a relevant measurement model on the basis of directly measured values, to evaluatea) human exposure to hand-transmitted vibration at the workplace,b) vibration emission of hand-held and hand-guided machinery in a laboratory setting,c) human exposure to whole-body vibration at the workplace, andd) whole-body vibration emission of vehicles.Examples of the application of the individual methods in practical situations are provided in the annexes.In this document a measurement error is defined as the difference between a measured and a reference quantity value.In this document “uncertainty” does not include errors that result from bad measurement strategies, faulty use of measurement equipment or other mistakes.
9.[标准] Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 13: Fastener driving tools

便携式手提动力工具.振动发射评估的试验方法.第13部分:紧固件驱动工具

发布单位：
国际组织-国际标准化组织(IX-ISO)

标准状态：
现行

标准号：
ISO 28927-13:2022

发布时间：
2022-02-11

中标分类：
-

国标分类：
25.140.10 手持工具 - 气动工具

13.160 环保、保健和安全 - 振动和冲击(与人有关的)

实施时间：

摘要： This document specifies a laboratory method for measuring the vibration at the handle of fastener driving tools. It is a type test procedure for establishing the vibration value on the handle of a hand-held power tool operating under a specified load.This document is applicable to fastener driving tools driven pneumatically or by other means, using nails, staples or pins.This document is applicable to tools with single sequential actuation, contact actuation, contact actuation with automatic reversion or continual contact actuation (see Figures？1 to 3).This document is not applicable to tools operating in full sequential mode due to their much longer intervals in between individual actuations. However, to provide an indication for comparison of different tools of this type (see Figures？4 and 5), Annex？C provides informative guidance.NOTE？Today current knowledge does not allow any conclusions regarding physiological and pathological effects between isolated shocks and continuous shock sequences, and their repetition rates.
10.[标准] Mechanical vibration — Description and determination of seated postures with reference to whole-body vibration

机械振动.关于全身振动的坐姿描述和测定

发布单位：
国际组织-国际标准化组织(IX-ISO)

标准状态：
现行

标准号：
ISO/TR 10687:2022

发布时间：
2022-02-09

中标分类：
-

国标分类：
13.160 环保、保健和安全 - 振动和冲击(与人有关的)

实施时间：

摘要： This document summarizes descriptive quantities for those responsible (e.g. scientists, safety engineers) for determination of postures for a seated person who is exposed to whole-body vibration. It is the intention that the results of different methods can be easily related to these quantities and that they allow for a common terminology between practitioners. The focus of this document is to offer a collection of ideas on how to measure postures in practice. The postures determined can also be used as a basis for further investigation or as a means of comparison for different methods. Although some of the approaches described here can be applied to standing or recumbent positions, additional considerations are likely to be required in these cases.NOTE？1？This work is closely related to International Standards which focus on static postures (ISO？11226[4]) or on radiologically accessible landmarks, i.e. points on the body (ISO？8727[3]).Additionally, this document deals with dynamic postures where body angles or associated movements are determined visually or by measuring points on the skin or clothing.NOTE？2？Nevertheless, ISO？8727[3] and ISO？11226[4] put forward principles for further extensions of posture determination which are followed in this document, in particular for measurements of body angles.This document does not specify sampling strategies or evaluation methods.
11.[标准] 기계적 진동 신경 기능 장애 평가를 위한 진동 촉 감 인 지 역치 제제1부부: 손가락 끝에서의 측정방법

机械振动.神经功能障碍评估用可控振动感知阈值.第1部分:指尖测量方法

发布单位：
韩国-韩国标准(KR-KS)

标准状态：
现行

标准号：
KS B ISO 13091-1-2022

发布时间：
2022-12-29

中标分类：
-

国标分类：
13.160 环保、保健和安全 - 振动和冲击(与人有关的)

实施时间：

摘要： 이 표준은 손가락 끝에서의 진동 촉감 인지 한계의 측정 방법과 측정 수행 절차 및 결과 보고 사항에 대하여 규정
12.[标准] 政协委派民主监督工作规范

发布单位：
中国-江苏省地方标准(CN-DB32)

标准状态：
现行

标准号：
DB3212/T 1044-2021

发布时间：
2021-08-23

中标分类：
A00 综合 - 标准化管理与一般规定 - 标准化、质量管理

国标分类：
13.160 环保、保健和安全 - 振动和冲击(与人有关的)

实施时间：
2021-08-23
13.[标准] 手持便携式动力工具振动试验方法第 10 部分:冲击式凿岩机、锤和破碎器

发布单位：
中国-国家标准(CN-GB)

标准状态：
现行

标准号：
GB/T 26548. 10-2021

发布时间：
2021-10-11

中标分类：
J48 机械 - 工艺装备 - 气动工具

国标分类：
13.160 环保、保健和安全 - 振动和冲击(与人有关的)

25.140.10 手持工具 - 气动工具

实施时间：
2022-05-01

摘要：本文件规定了手持便携式动力驱动带回转或不带回转功能的冲击式机器手柄部位手传振动辐射测量的试验方法，涉及的产品有便携式凿岩机、小炮孔钻、回转锤、破碎器(如:路面破碎器、混凝土破碎器或道路破碎器)、铆钉机、气铲、镐或类似工具,确定了型式试验状态下操作装有插人工具机器时手柄握持部位振动大小的型式检验程序。其测得的结果用于比较相同型式不同型号机器的振动量。本文件适用于由压缩空气或其他方式驱动,用于在岩石和混凝土等坚硬材料上钻孔的手持式机器(见第5章);也适用于在坚硬材料(混凝土、岩石、人行道、沥青路面等)上进行向下破碎作业的破碎器，以及在任意方向进行铆接和凿毛作业的锤类工具。本文件不适用于纯冲击机构的冲击钻,以及推力靠附加装置提供而不是用手来施加的气腿式凿岩机。注:为避免混淆“动力工具”和“插入工具”，本文件通篇采用“机器”代替“动力工具”
14.[标准] 手持便携式动力工具振动试验方法第11部分:石锤

发布单位：
中国-国家标准(CN-GB)

标准状态：
现行

标准号：
GB/T 26548. 11-2021

发布时间：
2021-10-11

中标分类：
J48 机械 - 工艺装备 - 气动工具

国标分类：
13.160 环保、保健和安全 - 振动和冲击(与人有关的)

25.140.10 手持工具 - 气动工具

实施时间：
2022-05-01

摘要：本文件规定了手持便携式石锤手柄部位手传振动测量的试验方法,确定了型式试验状态下操作石锤时手柄握持部位振动大小的型式检验程序。其测得的结果用于比较相同形式不同型号机器的振动大小。本文件适用于由压缩空气或其他方式驱动的雕刻笔和石匠用石锤(见第5章)。本文件不适用于在建设工程中进行拆除作业的锤类机器,或是用于金属材料的气铲。注:为避免混淆“动力工具”和“插人工具”，本文件通篇采用“机器”代替“动力工具”
15.[标准] 手持便携式动力工具振动试验方法第 12 部分:模具砂轮机

发布单位：
中国-国家标准(CN-GB)

标准状态：
现行

标准号：
GB/T 26548. 12-2021

发布时间：
2021-10-11

中标分类：
J48 机械 - 工艺装备 - 气动工具

国标分类：
13.160 环保、保健和安全 - 振动和冲击(与人有关的)

25.140.10 手持工具 - 气动工具

实施时间：
2022-05-01

摘要：本文件规定了模具砂轮机手柄部位手传振动测量的试验方法,确定了在典型试验条件下操作机器时手柄握持部位振动大小的型式检验程序。其测得的结果用来比较相同型式不同型号机器的振动量。本文件适用于以压缩空气或其他方式驱动,通过装在夹头上的合金锉或磨头在硬钢/塑料等不同材料上,进行修边操作的手持式机器;也适用于使用砂页轮或筒形砂轮的低速模具砂轮机。注1:本文件不适用于安装1型平形砂轮、4型单斜边砂轮或不同型号的带柄圆柱模头的直柄式砂轮机,这类机器在GB/T 26548.4中规定。注2:本文件不适用于使用钢丝刷的模具砂轮机。注3:为避免混淆“动力工具”和“插入工具”,本文件通篇采用“机器"代替“动力工具
16.[标准] 手持便携式动力工具振动试验方法第10部分：冲击式凿岩机、锤和破碎器

发布单位：
中国-国家标准(CN-GB)

标准状态：
现行

标准号：
GB/T 26548.10-2021

发布时间：
2021-10-11

中标分类：
J48 机械 - 工艺装备 - 气动工具

国标分类：
13.160 环保、保健和安全 - 振动和冲击(与人有关的)

实施时间：
2022-05-01

摘要：本文件规定了手持便携式动力驱动带回转或不带回转功能的冲击式机器手柄部位手传振动辐射测量的试验方法，涉及的产品有便携式凿岩机、小炮孔钻、回转锤、破碎器（如：路面破碎器、混凝土破碎器或道路破碎器）、铆钉机、气铲、镐或类似工具，确定了型式试验状态下操作装有插入工具机器时手柄握持部位振动大小的型式检验程序。其测得的结果用于比较相同型式不同型号机器的振动量。
本文件适用于由压缩空气或其他方式驱动，用于在岩石和混凝土等坚硬材料上钻孔的手持式机器（见第5章）；也适用于在坚硬材料（混凝土、岩石、人行道、沥青路面等）上进行向下破碎作业的破碎器，以及在任意方向进行铆接和凿毛作业的锤类工具。
本文件不适用于纯冲击机构的冲击钻，以及推力靠附加装置提供而不是用手来施加的气腿式凿岩机。
注：为避免混淆“动力工具”和“插入工具”，本文件通篇采用“机器”代替“动力工具”。

获取标准
17.[标准] 环保隔音减震垫通用规范

发布单位：
中国-团体标准(CN-TUANTI)

标准状态：
现行

标准号：
T/SHMHZQ 104-2021

发布时间：
2021-12-07

中标分类：
C33 医药、卫生、劳动保护 - 医疗器械 - 口腔科器械、设备与材料

国标分类：
13.160 环保、保健和安全 - 振动和冲击(与人有关的)

实施时间：
2021-12-09

摘要：范围:规定了环保隔音减震垫的技术要求、试验方法、检验规则、标志、包装、运输和贮存。适用于上海佳动实业有限公司生产的环保隔音减震垫;主要技术内容:4 技术要求4.1 外观4.2 规格尺寸及偏差4.3 物理性能4.4 撞击声压级改善量5 试验方法5.1 试验条件5.2 外观5.3 规格尺寸5.4 物理性能6 检验规则6.1 出厂检验6.2 周期性检验6.3 型式检验6.4 判定规则7 标志、包装、运输与贮存
18.[标准] Forestry and gardening machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO 22867:2021)

林业和园艺机械.带内燃机的便携式手持式机器的振动试验规范.手柄处的振动（ISO/DIS22867:2020)

发布单位：
国际组织-欧洲标准化委员会(IX-CEN)

标准状态：
现行

标准号：
EN ISO 22867:2021

发布时间：
2021-12-15

中标分类：
B90/99 农业、林业 - 农、林机械与设备

国标分类：
13.160 环保、保健和安全 - 振动和冲击(与人有关的)

65.060.80 农业机械、工具和设备 - 林业设备

实施时间：
2021-12-15

摘要： This document specifies a vibration test code for determining, efficiently and under standardized conditions, the magnitude of vibration at the handles of portable hand-held, internal-combustion-engine-powered forest and garden machinery, including chain-saws, brush-cutters, grass-trimmers, edgers, pole-mounted powered pruners, hedge-trimmers and garden-blowers.Although the magnitudes measured are obtained in an artificial operation, they nevertheless give an indication of the values to be found in a real work situation.Vibration test codes, as described in this document, enable the manufacturer to verify the effort regarding low vibration design.
19.[标准] Human response to vibration - Measuring instrumentation - Part 2: Personal vibration exposure meters (ISO 8041-2:2021)

人体对振动的响应测量仪器第2部分:第2部分:个人振动暴露计

发布单位：
国际组织-欧洲标准化委员会(IX-CEN)

标准状态：
现行

标准号：
EN ISO 8041-2:2021

发布时间：
2021-06-09

中标分类：
A40/49 综合 - 基础学科

国标分类：
13.160 环保、保健和安全 - 振动和冲击(与人有关的)

实施时间：
2021-06-09

摘要： This document specifies minimum requirements for personal vibration exposure meters (PVEM).This document is applicable to instruments designed for measurements of whole-body vibration in the context of industrial hygiene applications (according to ISO 2631-1, ISO 2631-2 and ISO 2631-4) and/or hand-arm vibration (according to ISO 5349-1) together with the associated exposure times.This document provides specified design goals and permitted tolerances that define the minimum performance capabilities and functional requirements of instruments designed to measure personal daily vibration exposure.This document does not apply to instruments designed to measure or log exposure times without also performing vibration measurement. Instrumentation of this type is described in ISO/TR 19664.
20.[标准] Mechanical vibration — Vibrotactile perception thresholds for the assessment of nerve dysfunction — Part 2: Analysis and interpretation of measurements at the fingertips

机械振动 - 神经功能障碍评估的Vibrotactile感知阈值 - 第2部分:指尖测量的分析和解释

发布单位：
国际组织-国际标准化组织(IX-ISO)

标准状态：
现行

标准号：
ISO 13091-2:2021

发布时间：
2021-08-13

中标分类：
-

国标分类：
13.160 环保、保健和安全 - 振动和冲击(与人有关的)

实施时间：

摘要： This document specifies methods and procedures for analysing and interpreting vibrotactile perception thresholds and threshold shifts. Procedures for describing statistically significant changes in vibrotactile perception thresholds are recommended.This document is applicable to vibrotactile perception thresholds determined at the fingertips according to the provisions of ISO？13091？1.