颜色编码_国内外标准网文献检索下载

1.[标准] 医疗导管标识管理规范

发布单位：
中国-湖南省地方标准(CN-DB43)

标准状态：
现行

标准号：
DB43/T 2622-2023

发布时间：
2023-05-29

中标分类：
C00 医药、卫生、劳动保护 - 医药、卫生、劳动保护综合 - 标准化、质量管理

国标分类：
01.070 综合、术语学、标准化、文献 - 颜色编码

实施时间：
2023-08-29
2.[标准] 정보통신공사업법 시행령

信息通信工程法执行令

发布单位：
韩国-韩国技术法规(KR-LEX)

标准状态：
现行

标准号：
대통령령(제32785호)

发布时间：
2022-07-11

中标分类：
M00/09 通信、广播 - 通信、广播综合

国标分类：
01.070 综合、术语学、标准化、文献 - 颜色编码

实施时间：
2022-07-12
3.[标准] Security and resilience – Emergency management – Guidelines for colour-coded alert

安全和复原力–应急管理–彩色警报指南

发布单位：
国际组织-国际标准化组织(IX-ISO)

标准状态：
现行

标准号：
ISO 22324:2022

发布时间：
2022-12-13

中标分类：
-

国标分类：
01.070 综合、术语学、标准化、文献 - 颜色编码

03.100.01 公司(企业)的组织和管理 - 公司(企业)的组织和管理综合

实施时间：

摘要： This document gives guidance on the use of colour codes to inform people at risk as well as first response personnel about danger and to express the severity of a situation. This document is applicable to all types of hazard in any location.This document does not apply to the method for displaying colour codes, detailed ergonomic considerations related to viewing displays or safety signs covered by ISO？3864-1.
4.[标准] 集中式饮用水水源地命名和信息编码规范

发布单位：
中国-甘肃省地方标准(CN-DB62)

标准状态：
现行

标准号：
DB62/T 4392-2021

发布时间：
2021-09-15

中标分类：
Z04 环境保护 - 环境保护综合 - 基础标准与通用方法

国标分类：
01.070 综合、术语学、标准化、文献 - 颜色编码

实施时间：
2021-10-15
5.[标准] 4S店内安全色使用要求

发布单位：
中国-团体标准(CN-TUANTI)

标准状态：
现行

标准号：
T/ZQCSH 032-2021

发布时间：
2021-09-16

中标分类：
C30/49 医药、卫生、劳动保护 - 医疗器械

国标分类：
01.070 综合、术语学、标准化、文献 - 颜色编码

实施时间：
2021-09-16

摘要：主要技术内容:1 范围2 规范性引用文件3 术语和定义4 安全色5 对比色6 对比色相间条纹7 设备设施颜色8 检查与维修
6.[标准] Code for designation of colours

颜色指定代码

发布单位：
国际组织-国际电工委员会(IX-IEC)

标准状态：
现行

标准号：
IEC 60757:2021

发布时间：
2021-06-16

中标分类：
-

国标分类：
01.070 综合、术语学、标准化、文献 - 颜色编码

29.020 电气工程 - 电气工程综合

实施时间：

摘要： IEC 60757:2021 specifies letter codes for designation of colours and provides rules for their combination to designate colour combinations. The letter codes are intended to be applied in the technical documentation of electrical installations, electrical equipment and products, and in markings of electrical equipment and products.This basic safety publication focusing on safety essential requirements is primarily intended for use by technical committees in the preparation of safety publications in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51.It is not intended for use by manufacturers or certification bodies. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. The requirements of this basic safety publication will not apply unless specifically referred to or included in the relevant publications.This document does not specify any requirements for the encoding of colour properties, nor for their visual representation. Such requirements are under the responsibility of the different technical committees.IEC 60757:2021 cancels and replaces the first edition published in 1983. This edition constitutes a technical revision.This edition includes the following significant technical changes with respect to the previous edition:a) codes restricted to letter codes;b) removed old unnecessary notes;c) added a new subclause on alternating colours of the same item;d) added Annex A with examples of colours and their corresponding RGB (red, green, blue) encoding.
7.[标准] 정보통신공사업법 시행령

信息通信工程法执行令

发布单位：
韩国-韩国技术法规(KR-LEX)

标准状态：

标准号：
대통령령(제31768호)

发布时间：
2021-06-15

中标分类：
M00/09 通信、广播 - 通信、广播综合

国标分类：
01.070 综合、术语学、标准化、文献 - 颜色编码

实施时间：
2021-06-15
8.[标准] Standard Guide for Setting Object Color Specifications

设置物体颜色规格的标准指南

发布单位：
美国-美国材料与试验协会(US-ASTM)

标准状态：
现行

标准号：
ASTM D7195-21

发布时间：
2021-06-01

中标分类：
-

国标分类：
01.070 综合、术语学、标准化、文献 - 颜色编码

实施时间：

摘要： 1.1This guide leads the user through a process for establishing color specifications, including the target color and allowable tolerances. It refers to the appropriate ASTM standards that more thoroughly describe each step of the process beginning with expectations, encompassing caveats within the process and finally concluding with reporting.1.2This guide does not suggest numerical values for tolerances. These values must be agreed upon by the parties involved.1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ======5.1The rejection of materials due to color is a common and expensive occurrence, and it is useful for a customer and producer to set color specifications with an associated tolerance before the transaction. This guide discusses the concept and details the ASTM standards to be used in the process.
9.[标准] Standard Specification for Color and Appearance Retention of Solid and Variegated Color Plastic Siding Products using CIELab Color Space

使用CIELab颜色空间的固体和杂色塑料壁板产品的颜色和外观保持性标准规范

发布单位：
美国-美国材料与试验协会(US-ASTM)

标准状态：
现行

标准号：
ASTM D7856-21

发布时间：
2021-07-01

中标分类：
-

国标分类：
01.070 综合、术语学、标准化、文献 - 颜色编码

83.080.01 塑料 - 塑料综合

实施时间：

摘要： 1.1This specification establishes requirements and test methods for the color and appearance retention of solid and variegated colored plastic siding products.1.2Color retention testing provides a method for estimating the acceptability of color change in a plastic siding product over an extended period of service.Note 1:The exposure locations and durations specified in this standard have been shown to provide a good estimation of the color change in vinyl and polypropylene siding products over an extended period of service (see2.2). It is expected that materials designed for the exposure conditions typical of exterior siding will respond similarly, but the applicability of this standard to other types of plastic siding has not been empirically established.1.3This specification is a successor to SpecificationsD6864andD7251, which cover solid colors and variegated colors, respectively. This specification combines coverage for both, and has the same scope as those standards.1.4SpecificationsD6864andD7251use Hunter Lab color space for measurement of colors and evaluation of color change. These standards require classification of colors into regions based on the L, a, and b coordinates of the color, and evaluation of color changes is done using an ellipsoid value equation having unique coefficients for each color region. This specification uses CIE 1976 L* a* b* color space for measurement and evaluation of color change. Using this method, the need for separate color regions and evaluation equations has been eliminated.1.5Provisions for sample selection and preparation, and weathering are the same in this specification as in SpecificationsD6864andD7251.1.6Characterization of color and appearance for variegated colors is complicated by the presence of multiple colors in a random pattern. The procedure for measuring variegated colors in this specification is based on using a template to reference six spots for color measurement.1.7This standard specifies outdoor weathering in three specific climate zones for a single 24-month exposure, and the color retention performance requirements under these conditions are established to be indicative of acceptable performance over an extended period of service. However, nothing in this standard precludes the use of different or additional climate zones, or different exposure durations, so long as those conditions are clearly specified in any reports.1.8Units—The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.1.9This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.Note 2:There is no known ISO equivalent to this standard.1.10This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
10.[标准] Standard Specification for Color-Coding Pipets or Containers Coated With Anticoagulants

带有抗凝剂的彩色编码管或容器的标准规范

发布单位：
美国-美国材料与试验协会(US-ASTM)

标准状态：
现行

标准号：
ASTM E1048-88(2021)

发布时间：
2021-01-01

中标分类：
-

国标分类：
01.070 综合、术语学、标准化、文献 - 颜色编码

11.100.99

实施时间：

摘要： 1.1This specification covers a system to identify the anticoagulants used in coating pipets or containers not exceeding 1 mL in volume.1.2The purpose of this specification is to ensure that if a color code is used with an anticoagulant, all manufacturers will be encouraged to use the same code; it is not intended to require color coding.1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
11.[标准] Standard Specification for Color Coding of Laboratory Pipets with Multiple Graduations, 0.1 mL and Larger, But Excluding Disposable Prothrombin and Disposable Micropipets

具有多个刻度 0.1 mL和更大但不包括一次性凝血酶原和一次性微量吸管的实验室管道的彩色编码标准规范

发布单位：
美国-美国材料与试验协会(US-ASTM)

标准状态：
现行

标准号：
ASTM E1380-90(2021)

发布时间：
2021-01-01

中标分类：
-

国标分类：
01.070 综合、术语学、标准化、文献 - 颜色编码

11.100.99

实施时间：

摘要： 1.1This specification provides a system for color coding disposable pipets (glass and plastic) with multiple graduations. The color will indicate capacity and subdivisions for identification purposes.1.2The intent of this specification is to ensure that when color coding is utilized, all manufacturers will be encouraged to use the same color for nominal value identification.1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
12.[标准] 한국인 원자폭탄 피해자 지원을 위한 특별법

韩国原子弹受害者支援特别法

发布单位：
韩国-韩国技术法规(KR-LEX)

标准状态：
现行

标准号：
법률(제16409호)

发布时间：
2019-04-30

中标分类：
Y80/84 轻工、文化与生活用品 - 家具

国标分类：
01.070 综合、术语学、标准化、文献 - 颜色编码

实施时间：
2019-08-01
13.[标准] 정보통신공사업법 시행령

信息通信工程法执行令

发布单位：
韩国-韩国技术法规(KR-LEX)

标准状态：

标准号：
대통령령(제30034호)

发布时间：
2019-08-06

中标分类：
M00/09 通信、广播 - 通信、广播综合

国标分类：
01.070 综合、术语学、标准化、文献 - 颜色编码

实施时间：
2019-10-25
14.[标准] Standard Specification for Color Coding of Reusable Laboratory Pipets

可重复使用的实验室管道颜色编码标准规范

发布单位：
美国-美国材料与试验协会(US-ASTM)

标准状态：
现行

标准号：
ASTM E1273-88(2019)

发布时间：
2019-07-01

中标分类：
-

国标分类：
01.070 综合、术语学、标准化、文献 - 颜色编码

71.040.20 分析化学 - 实验室器皿和有关仪器

实施时间：

摘要： 1.1This specification covers a system of color coding for one-mark pipets for identification of nominal capacities, and for graduated pipets for identification of nominal capacities and units of sub-division.1.2This specification applies to one-mark and graduated pipets of the nominal capacities listed inTable 1andTable 2, respectively.Note 1:Many pipets not covered by other ASTM standards are included inTable 1andTable 2, in order, firstly, to ensure uniformity of color coding as far as possible for non-standard as well as standard pipets and, secondly, to reserve suitable codes for possible future standards for other types of pipet.1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ======3.1The purpose of this specification is to ensure that if a color code is used on pipets, all manufacturers will use the same code; it is not intended as an encouragement of color coding if this is not required.
15.[标准] Tools for pressing — Compression springs with rectangular section — Housing dimensions and colour coding

压制工具 - 带矩形截面的压缩弹簧 - 外壳尺寸和颜色编码

发布单位：
国际组织-国际标准化组织(IX-ISO)

标准状态：
现行

标准号：
ISO 10243:2019

发布时间：
2019-05-17

中标分类：
-

国标分类：
25.120.10 无屑加工设备 - 锻压设备、冲压机、剪切机

01.070 综合、术语学、标准化、文献 - 颜色编码

实施时间：

摘要： This document establishes the technical specifications for compression springs made from rectangular wires.The parameters set in this document are applicable to springs which are set. This document does not attempt to specify the quality of the springs themselves, nor all of their dimensions (e.g. cross-section), their material or their length of life.The springs are classified into spring rates: light, medium, strong and extra strong. For each spring rate, this document gives a colour code.
16.[标准] 基本医疗保险药品代码

发布单位：
中国-天津市地方标准(CN-DB12)

标准状态：
废止

标准号：
DB12/T 774-2018

发布时间：
2018-03-16

中标分类：
C04 医药、卫生、劳动保护 - 医药、卫生、劳动保护综合 - 基础标准与通用方法

国标分类：
01.070 综合、术语学、标准化、文献 - 颜色编码

实施时间：
2018-04-16

摘要：本标准适用于天津市基本医疗保险药品管理、结算等
17.[标准] 冲模矩形截面压缩弹簧安装尺寸和颜色标识

发布单位：
中国-国家标准(CN-GB)

标准状态：
现行

标准号：
GB/T 36524-2018

发布时间：
2018-07-13

中标分类：
J46 机械 - 工艺装备 - 模具

国标分类：
01.070 综合、术语学、标准化、文献 - 颜色编码

25.120.10 无屑加工设备 - 锻压设备、冲压机、剪切机

实施时间：
2019-02-01

摘要：本标准规定了使用矩形截面金属线材制造的压缩弹簧的技术要求，并给出了各弹簧等级的颜色标识。本标准参数适用于弹簧的安装，不规定弹簧本身的质量，也未涉及所有的弹簧尺寸（如截面尺寸)、材料或寿命。本标准将弹簧分为轻型、中型、重型和特重型四个等级。

获取标准
18.[标准] Strafgesetzbuch und Militärstrafgesetz (Umsetzung von Art. 123c BV)

《刑法》和《军事刑法》（《刑法》第123c条的实施）

发布单位：
瑞士-瑞士技术法规(CH-LEX)

标准状态：

标准号：
BBl 2018 1495

发布时间：
2018-03-27

中标分类：
X30/34 食品 - 制糖与糖制品

国标分类：
01.070 综合、术语学、标准化、文献 - 颜色编码

实施时间：
19.[标准] 정보통신공사업법 시행령

信息通信工程法执行令

发布单位：
韩国-韩国技术法规(KR-LEX)

标准状态：

标准号：
대통령령(제29057호)

发布时间：
2018-07-24

中标分类：
M00/09 通信、广播 - 通信、广播综合

国标分类：
01.070 综合、术语学、标准化、文献 - 颜色编码

实施时间：
2018-08-22
20.[标准] 정보통신공사업법 시행령

信息通信工程法执行令

发布单位：
韩国-韩国技术法规(KR-LEX)

标准状态：

标准号：
대통령령(제28801호)

发布时间：
2018-04-17

中标分类：
M00/09 通信、广播 - 通信、广播综合

国标分类：
01.070 综合、术语学、标准化、文献 - 颜色编码

实施时间：
2018-10-18