ISO 2940-1:1974 Milling cutters mounted on centring arbors having a 7/24 taper — Fitting dimensions — Centring arbors

安装在定心心轴上的铣刀具有7/24锥度——配件尺寸——定心杆

基本信息

标准号

ISO 2940-1:1974

标准状态

现行

发布单位或类别

国际组织-国际标准化组织(IX-ISO);

发布日期

实施日期

废止日期

CCS分类

ICS分类

25.100.20 切削工具 - 铣刀

研制信息

起草单位

- 展开▼

起草人

归口单位

ISO/TC 29/SC 9

摘要

Applies both to cutters with inserted teeth, made from high speed steel or with brazed carbide tips, and to cutters equipped with indexable carbide tips. Concerns milling cutters, arbor located, to be used with a well-defined spindle nose having a 7/24 taper and milling cutter, arbor located, to be used bith spindle nose No. 50 and spindle nose No. 60 having a 7/24 taper. The general fitting dimensions are in accordance with ISO 297. 适用于带有插入齿、由高速钢制成或带有钎焊硬质合金刀片的刀具，以及配有可转位硬质合金刀片的刀具。涉及与具有7/24锥度的明确主轴头一起使用的刀杆定位铣刀，以及与具有7/24锥度的50号主轴头和60号主轴头一起使用的刀杆定位铣刀。一般装配尺寸符合ISO 297的要求。展开▼

相似标准

1.Milling cutters mounted on centring arbors having a 7/24 taper — Inserted tooth cutters
机译：安装在定心心轴上的铣刀具有7/24锥度——插齿刀
2.Holding arbors with taper shank 7/24 for milling cutters and face milling cutters with internal alignment
机译：内对准铣刀和面铣刀用7/24锥柄夹持杆
3.Milling machine arbors with taper shank 7/24 for milling cutter with longitudinal or transverse drive
机译：带7/24锥柄的铣床主轴用于纵向或横向驱动的铣刀
4.Milling machine arbors with 7/24 taper for milling cutters with longitudinal and transverse drive
机译：纵向和横向驱动铣刀用7/24锥度铣床主轴
5.Cutter arbors with parallel key and tenon drive-Dimensions and designation of tool holders with 7/24 taper without automatic tool changer
机译：带平行键和榫传动的刀杆