Reinforced string holder for the EK Archery Cobra R9®/RX®/Adder®/Siege 300® crossbow models and for the Cold Steel Cheap Shot® crossbow models

摘要

Reinforced string holder for use in the "EK Archery Cobra R9 / RX / Adder / Siege 300" crossbow models and the "Cold Steel - Cheap Shot" crossbow models, characterized a) in that they are made of solid solid material measuring 26.1 to 26.3 mm height, a maximum width of 11.8 mm and a depth of up to 11.8 mm and fully functional using the original torsion springs of the standard trigger system of the aforementioned crossbows can replace the original, much thinner string mount of the trigger mechanism,b) that installed in the original lock case of the aforementioned crossbow models, the original cocking stroke (power stroke) of the specified crossbows is extended by a maximum of one and a half millimeters and c) when locked within the original lock is at right angles to the firing groove of the aforementioned crossbows, d) that the side parts cover the entire height of the string mount are solid and up to 3.2 mm wide,e) that it has a recess around the axle hole in the respective side part to accommodate part of the original return springs,f) that its contact surface on the locking mechanism (G) in the trigger lock of the aforementioned crossbow models is one millimeter lower than the rest of the back of the string holder andg) that on the left a hole (B,C) for the leg of the respective return spring is made on the right side part of the tendon holder and both holes push into the recess for the respective return spring in the side part in question.