首页> 外国专利> PROGRAMMABLE LOGICAL PROVISION WITH A TREATMENT FOR THE CLASSIFICATION OF MEMBER STATES AS APPLICABLE, PUBLISHED OR UNVALUABLE

PROGRAMMABLE LOGICAL PROVISION WITH A TREATMENT FOR THE CLASSIFICATION OF MEMBER STATES AS APPLICABLE, PUBLISHED OR UNVALUABLE

机译:程序逻辑规定,并进行了处理,以将会员国分类为可适用,可公布或不可估价的状态

摘要

A programmable logic device (PLD) integrated circuit containing an array of fuse or anti-fuse links includes verification circuitry configured to classify link resistances after programing into three resistance zones, corresponding to a "closed" state zone, an "open" state zone and a "forbidden" state zone intermediate the "closed" and "open" state zones. Two reference resistance values, namely a lower reference resistance value and the higher reference resistance value, divide the entire range of possible link resistance values into the aforementioned three resistance zones. Because the ratio between the higher reference resistance value and the lower reference resistance value is typically more than 50, the verification circuitry includes a switchable two level current source that produces a voltage across the link of correct dynamic range. A measurement voltage produced in response to the link voltage is compared by a pair of differential comparators to respective lower and higher reference voltages, the lower reference voltage corresponding to the measurement voltage that would be produced by a higher link voltage that is the product of the higher reference resistance value and the lower current level, and the higher reference voltage corresponding to the measurement voltage that would be produced by a lower link voltage that is the product of the lower reference resistance value and the higher current level.
机译:包含熔丝或反熔丝链的阵列的可编程逻辑器件(PLD)集成电路,包括验证电路,该验证电路配置为在编程为三个电阻区域(对应于“闭合”状态区域,“断开”状态区域和电阻)后,将链路电阻分类。在“关闭”和“打开”状态区域中间的“禁止”状态区域。两个参考电阻值,即较低的参考电阻值和较高的参考电阻值,将可能的链路电阻值的整个范围划分为上述三个电阻区域。因为较高的参考电阻值和较低的参考电阻值之间的比率通常大于50,所以验证电路包括可切换的两电平电流源,该电流源会在正确动态范围的链路上产生电压。一对差分比较器将响应于链路电压而产生的测量电压与相应的较低和较高基准电压进行比较,该较低基准电压对应于由较高链路电压产生的测量电压,该较高链路电压是测量电压的乘积。较高的参考电阻值和较低的电流水平,以及较高的参考电压,它对应于由较低的链路电压(较低的参考电阻值和较高的电流水平的乘积)产生的测量电压。

著录项

相似文献

  • 专利
  • 外文文献
  • 中文文献
获取专利

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号