in this research paper material feeding device in the supply of raw materials, the accuracy in order to improve the structure of the first car component, each component of the transmission of the gear box through the implementation of a variety of power loss in the material paper supply to improve the reliability and energy saving, in order to achieve the research of.;in the paper, the material feeding device (1).;in the paper, the material feeding device (1) formed in the first room, placed the material in order to form a government in the processing of the ridge (11) formed on the frame (13) through the old equipment in shaft (14) through a gap formed in the other. and the adjusting motor (17). and the transfer screw body (18) of the control to be possible in between... on the component (12).;on the component (12) and a certain distance is the site of the material, the other side is placed on a smooth and at the same time, take the time to be in the form of good, so is the load (16) containing bearing part (10).;the frame (13) through the cam shaft (21), and plural pieces of guide bar (22, 22 ') through the guide bar in between..., (22') in the form of the east - (24) through a cam (25) of the groove (26) is it? the box with the adsorption cylinder a or (23);the cam shaft (21) of the gear (27) of the tip, the more complete, the gear (27) of the trajectory is the in between... the gear (28) and to the connection, and the device (28) to be the house vacuum cylinder (29) and a connection body a vacuum device (30) to take the connection is the part (20) and the;one side of the frame (13) of the hinge, and fixed on the chain, and will be a key to move the shaft (51) to be possible to slide the first kicker plate (52).;the first kicker plate (52), a side frame (13) can rotate in the movement reference point. as a name, thanks to the first kicker lever (53) is hinge fixed.;the first kicker lever (53) in the center of a groove (54) formed through the through groove, and the idler gear (54), (28), a connection is the key to the eccentric gear (55) and a small eastern european (56) to the device (55, in between... the ud68cuc804uc6b4 east the first kicker lever (53) by linear motion switch, a first key (50) of the drive is composed of a first day (50), and a key;the kicker device (55) is the key, a gear shaft (57) and the operation rod (61) is connected to the upright by the second key rod (62) and the second kicker lever (62) of the tip, the fixed width is the type of the second kicker plate (63) is a measure of the second key (60) of the a transfer part (40) is composed of the feature.
展开▼