Flue gas cleaning filter for biomass heating devices without or with condensing boiler technology and oil - gas - change firing device

摘要

The ‘ flue gas cleaning filter for biomass heating devices without or with condensing boiler technology and oil - gas - change firing device " consists of the double-shell combined filter - oil - gasb the case of racing chamber housing (1.1) the condensate - and cleaning container (2) of the flue gas cleaning filter cassette (3) and the filter guide plunger with servo motor and a friction clutch (4). In the condensate - and cleaning container (2) are the well pump with a float switch (6), the three paths - change-over valve (7), the fresh water float valve with a solenoid valve (9) and the terminal position (10) as well as the rinsing agent container with metering pump (8) or onto a -. For the flue gas transport, the fan is, with an electric motor and a heat insulating coupling (5) is installed.This apparatus is placed on the flue tube or to the stack of a biomass heating device is mounted laterally so that the flue gas mass flux through the connection line is drawn in again filtered, and below a inflow angle of approximately 40 – 60° in the biomass devices smoke flows back into the chimney pipe or.In the case of the device-version (1.1), by means of the oil - gas - burner front end with a rotatable burner plate (18), an oil - or gas blower burner with automatic air closure flap, so that a replacement of the firing is at any time.At the same time, in this device-version (1.1) of the flue gas fuel installed value capacitor (19), so that both in the case of the biomass combustion as well as in the case of the oil - or gas - emergency steering mode the highest possible degree of energy utilization of the fuel used, and a reduced environmental pollution is ensured.For the pure flue gas filtering, the single-walled filter housing without condensing boiler technology and without oil - gas - change firing device.