首页> 外文OA文献 >Thermal stability of SiGe films on an ultra thin Ge buffer layer on Si grown at low temperature
【2h】

Thermal stability of SiGe films on an ultra thin Ge buffer layer on Si grown at low temperature

机译:低温生长的Si上超薄Ge缓冲层上的SiGe膜的热稳定性

代理获取
本网站仅为用户提供外文OA文献查询和代理获取服务,本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文,但由于OA文献来源多样且变更频繁,仍可能出现获取不到、文献不完整或与标题不符等情况,如果获取不到我们将提供退款服务。请知悉。

摘要

The thermal stability of SiGe films on an ultra thin Ge buffer layer on Si fabricated at low temperature has been studied. The microstructure and morphology of the samples were investigated by high-resolution X-ray diffraction, Raman spectra and atomic force microscopy, and using a diluted Secco etchant to reveal dislocation content. After thermal annealing processing, it is observed that undulated surface, threading dislocations (TDs) and stacking faults (SFs) appeared at the strained SiGe layer, which developed from the propagation of a misfit dislocation (MD) during thermal annealing, and no SFs but only TDs formed in strain-relaxed sample. And it is found that the SiGe films on the Ge layer grown at 300 degrees C has crosshatch-free surface and is more stable than others, with a root mean square surface roughness of less than 2 nm and the threading dislocation densities as low as similar to 10(5) cm(-2). The results show that the thermal stability of the SiGe films is associated with the Ge buffer layer, the relaxation extent and morphology of the SiGe layer. (C) 2010 Elsevier B. V. All rights reserved.
机译:研究了在低温下在硅上形成的超薄锗缓冲层上的硅锗膜的热稳定性。通过高分辨率X射线衍射,拉曼光谱和原子力显微镜研究样品的微观结构和形态,并使用稀释的Secco蚀刻剂显示位错含量。经过热退火处理后,观察到应变的SiGe层出现了起伏的表面,螺纹位错(TDs)和堆垛层错(SFs),这是由于热退火过程中错配位错(MD)的传播而形成的,而没有SFs,但是只有在松弛应变样品中形成了TD。并且发现在300摄氏度下生长的Ge层上的SiGe膜具有无交叉影线的表面并且比其他膜更稳定,其均方根表面粗糙度小于2 nm,且螺纹位错密度低至相似至10(5)cm(-2)。结果表明,SiGe薄膜的热稳定性与Ge缓冲层,SiGe层的弛豫程度和形貌有关。 (C)2010 Elsevier B. V.保留所有权利。

著录项

相似文献

  • 外文文献
  • 中文文献
  • 专利
代理获取

客服邮箱:kefu@zhangqiaokeyan.com

京公网安备:11010802029741号 ICP备案号:京ICP备15016152号-6 六维联合信息科技 (北京) 有限公司©版权所有
  • 客服微信

  • 服务号