首页> 外文OA文献 >Finite Element Analysis of the Polyethylene Pipe Heating during Welding with a Heating Plate

【2h】

Finite Element Analysis of the Polyethylene Pipe Heating during Welding with a Heating Plate

机译：加热板焊接过程中聚乙烯管加热的有限元分析

代理获取

本网站仅为用户提供外文OA文献查询和代理获取服务，本网站没有原文。下单后我们将采用程序或人工为您竭诚获取高质量的原文，但由于OA文献来源多样且变更频繁，仍可能出现获取不到、文献不完整或与标题不符等情况，如果获取不到我们将提供退款服务。请知悉。

页面导航

著录项
引文网络
相似文献
相关主题

著录项

作者
Adelin Tută; Dorel Spiru Dumitriu;
展开▼
作者单位

展开▼
年度 2008
总页数
原文格式 PDF
正文语种
中图分类

相似文献

外文文献
中文文献
专利

1. Proposal of residual stress mitigation in nuclear safety-related austenitic stainless steel TP304 pipe bended by local induction heating process via elastic-plastic finite element analysis [J] . Jong-Sung Kim, Kyoung-Soo Kim, Young-Jin Oh, Nuclear engineering and technology . 2019,第5期

机译：核安全相关奥氏体不锈钢TP304弯塑局部感应加热弯管残余弹塑性有限元分析的建议
2. Finite element analysis for creep failure of coolant pipe in light water reactor due to local heating under severe accident condition [J] . Seiya Hagihara, Noriyuki Miyazaki Nuclear Engineering and Design . 2008,第1期

机译：严重事故条件下局部加热导致轻水堆冷却剂管蠕变失效的有限元分析
3. INVESTIGATIONS ON PWHT EFFECTIVENESS OF SA213 T23 TUBULAR BUTT WELDS USING FLEXIBLE CERAMIC RESISTANCE HEATING ELEMENTS AND FINGER ELEMENT HEATING COILS - A COMPARATIVE CASE STUDY [J] . N. Raju, V. Sudharsanam, G. Ravichandran, WRI Journal: Journal of the Welding Research Institute . 2014,第2期

机译：柔性陶瓷电阻加热元件和指状元件加热线圈对SA213 T23管状对焊管PWHT有效性的研究-案例比较
4. Finite element analysis of effects of preheating and postweld heat treatment on residual stress in pipe welding [C] . Hui Du, Dongpo Wang, Chunxiu Liu, International Conference on Advanced Design and Manufacturing Engineering . 2011

机译：预热和邮政热处理对管焊中残余应力影响的有限元分析
5. An investigation of a flat plate oscillating heat pipe as a thermal spreader with centered heating [D] . Johnson, Aaron T. 2015

机译：平板振荡热管作为集中供热散热器的研究
6. Welding Temperature Distribution and Residual Stresses in Thick Welded Plates of SA738Gr.B Through Experimental Measurements and Finite Element Analysis [O] . Xiaoyu Yang, Guizhen Yan, Yanfei Xiu, 2019

机译：实验测量和有限元分析的SA738Gr.B厚板焊接温度分布及残余应力
7. Analysis of induction heating in pipe bender by finite-boundary element method. [O] . Motoya Ito, Masahiro Otaka, Shinji Sakata, 1990

机译：有限边界元法通过有限边界元法分析管道弯管中的感应加热。
8. Proof Testing of a Structural Plate Pipe with Varying Bedding and Backfill Parameters. Section VII (Volume 1): Finite Element Analysis. Program Modification and Analysis of Zone 2 [R] . Lea, J. , Davis, R. E. 1981

机译：具有不同衬垫和回填参数的结构板管的验证试验。第VII节（第1卷）：有限元分析。第2区的程序修改和分析

Finite Element Analysis of the Polyethylene Pipe Heating during Welding with a Heating Plate

著录项

引文网络

相似文献

相关主题

期刊订阅